+7 (812) 645-08-06
Combustion gas analyzers
select brand
Flue gas analyzer / electrochemical / hand-held - CGA100
The CGA100 is designed to monitor the quality of Natural gas and combustible gases (Biogas,...
Flue gas analyzer / electrochemical / hand-held - CGA100
The CGA100 is designed to monitor the quality of Natural gas and combustible gases (Biogas, Fuel gas, COG, BFG, Recovery gases) by determination of Combustion Air Requirement Index (CARI), Wobbe index or Heating Value. Those parameters are very useful when the change of combustible gas composition can upset the process.
Flue gas analyzer / portable - GA40T
The GA40T is a portable flue gas analyzer for stacks and atmosphere in order to control furnaces and boilers.
Flue gas analyzer / oxygen / zirconia - 0 °C ... + 800 °C | 7873
The 7873 Model is a zirconia flue gas oxygen analyzer developed by Adev. It is mainly used for the analysis of combustion gases. The system measures the residual...
Flue gas analyzer / oxygen / zirconia - 0 °C ... + 800 °C | 7873
The 7873 Model is a zirconia flue gas oxygen analyzer developed by Adev. It is mainly used for the analysis of combustion gases. The system measures the residual concentration of Oxygen in the fumes produced by combustion processes.
The framework features fast response, excellent stability, and direct entry into the chimney.
In addition, its typical applications include combustion efficiency control in every type of boilers and furnaces, civil and industrial waste incinerators, electric power industry, coal fired power plants, cement kilns, chemical and petrochemical industry, and flue gas.
The framework features fast response, excellent stability, and direct entry into the chimney.
In addition, its typical applications include combustion efficiency control in every type of boilers and furnaces, civil and industrial waste incinerators, electric power industry, coal fired power plants, cement kilns, chemical and petrochemical industry, and flue gas.
Flue gas analyzer / oxygen / zirconia - + 600 °C ... + 1500 °C, ATEX | 6801
The 6801 model is a Zirconia flue gas oxygen analyzer that is specially designed to analyze combustion gases. It is capable of measuring the...
Flue gas analyzer / oxygen / zirconia - + 600 °C ... + 1500 °C, ATEX | 6801
The 6801 model is a Zirconia flue gas oxygen analyzer that is specially designed to analyze combustion gases. It is capable of measuring the residual concentration of Oxygen in the fumes that are caused by combustion processes. The process also produces the volume of residual Oxygen after the complete oxidation of the fuel. This tool can run on prolonged working hours and is designed to deliver precise, dependable and quick reaction to process changes. It is primarily utilized in applications in soaking pits, cremators and pre-heated furnaces as well.
Furnace atmosphere analyzer - + 700 °C ... + 1050 °C | ZCS3
The ZCS3 Series of Furnace Atmosphere Analyzer, manufactured by Adev, is specifically designed for...
Furnace atmosphere analyzer - + 700 °C ... + 1050 °C | ZCS3
The ZCS3 Series of Furnace Atmosphere Analyzer, manufactured by Adev, is specifically designed for carbon potential calculation and Oxi-reducing potential measure in the heat treatment atmospheres. This device can provide a regulating signal that ensures an intense fast response time and cost effective.
Moreover, it has an available version with output through plug-in connector.
Moreover, it has an available version with output through plug-in connector.
Furnace atmosphere analyzer - + 700 °C ... + 1050 °C | ZCS4
The Zirconia in situ model ZCS4 is a high temperature analyser that is designed specifically for...
Furnace atmosphere analyzer - + 700 °C ... + 1050 °C | ZCS4
The Zirconia in situ model ZCS4 is a high temperature analyser that is designed specifically for carbon potential calculation along with Oxi reducing potential measurement in heat treatment atmospheres. The ZCS4 provides a regulated signal along with quick response times and lower cost. The version connection is accomplished through the inner terminal board into the head of the probe.
Flue gas analyzer - UniGas 3000
Unigas 3000+ is an advanced flue gas analyzer. The device can be used with up to 4 gases i.e. O2, CO, NO & NO2 or SO2 along with electrochemical sensors, plus CO2 and NOx calculated. It can provide data or up to 10 fuels for...
Flue gas analyzer - UniGas 3000
Unigas 3000+ is an advanced flue gas analyzer. The device can be used with up to 4 gases i.e. O2, CO, NO & NO2 or SO2 along with electrochemical sensors, plus CO2 and NOx calculated. It can provide data or up to 10 fuels for the purpose of calculating values of combustion. The instrument comes with audible alarms for gas measurements. The device can be outfitted with custom sized flue gas sampling probes with different lengths and shapes to meet various requirements. Its sampling probe is connected to the instrument with a single or dual hose, a water trap and a suspended particle filter.
Unigas 3000+ also comes with a built in impact printer. Both the devices are powered by the same internal printer. It comes with a charger. The device can also be used for measuring remote combustion air temperature. A remote Pt100 probe (option 5 in table G) can be used for this purpose.
Unigas 3000+ also comes with a built in impact printer. Both the devices are powered by the same internal printer. It comes with a charger. The device can also be used for measuring remote combustion air temperature. A remote Pt100 probe (option 5 in table G) can be used for this purpose.
Flue gas analyzer / portable - UniGas 2000
The UniGas 2000 is a 1.1-kilo flue gas analyzer for O2, CO, and NO gases. It is equipped with electrochemical sensors, audible alarms on gases measurement, and a built-in impact printer. The model is...
Flue gas analyzer / portable - UniGas 2000
The UniGas 2000 is a 1.1-kilo flue gas analyzer for O2, CO, and NO gases. It is equipped with electrochemical sensors, audible alarms on gases measurement, and a built-in impact printer. The model is also CO2 and NOx calculated.
For computing combustion values, data for up to 10 fuels are given by the analyzer. To meet various needs, flue gas sampling probes in varied lengths and shapes are also available.
A single or dual hose, a water trap, and a suspended particle filter connects the sampling probe to the instrument. A rechargeable Li-ION battery powers the analyzer and its printer for 6 hours of continuous use, but a charger is also supplied with the product. The UniGas 2000 includes features such as zero-calibration, self-diagnosis, and smoke measurement.
For computing combustion values, data for up to 10 fuels are given by the analyzer. To meet various needs, flue gas sampling probes in varied lengths and shapes are also available.
A single or dual hose, a water trap, and a suspended particle filter connects the sampling probe to the instrument. A rechargeable Li-ION battery powers the analyzer and its printer for 6 hours of continuous use, but a charger is also supplied with the product. The UniGas 2000 includes features such as zero-calibration, self-diagnosis, and smoke measurement.
Flue gas analyzer - GreenLine 6000
A very good option for flue gas analyzer is Greenline 6000. It is used good for industrial combustion. It has 6 sensors that measure 6 gases like oxygen, Carbon Monoxide, Nitrgen Monoxide, Nitrogen Dioxide, Sulphuric Monoxide and CxHy which has electrical sensors....
Flue gas analyzer - GreenLine 6000
A very good option for flue gas analyzer is Greenline 6000. It is used good for industrial combustion. It has 6 sensors that measure 6 gases like oxygen, Carbon Monoxide, Nitrgen Monoxide, Nitrogen Dioxide, Sulphuric Monoxide and CxHy which has electrical sensors. It is also used for calculation of other gases like carbon Dioxide. It is programed to accept as any as 10 fuels preloaded. With the help of gasConfig, a PC software more fuels can be added. Availability of many flue gas probes are also available in all kinds and shapes to help match the needs of an application.
The probe for sambling is connected to the device with a hose(single or dual) through the water trap and suspended particle line filter.An optional heated industrial gas probe with an hot hose will be the most suitable for measuring high temperature of long term to avoid dilution of gases as well as dry the flue gas.For heavy application a pre-filter would be preferable. The system communication is possible with cable or bluetooth.
The probe for sambling is connected to the device with a hose(single or dual) through the water trap and suspended particle line filter.An optional heated industrial gas probe with an hot hose will be the most suitable for measuring high temperature of long term to avoid dilution of gases as well as dry the flue gas.For heavy application a pre-filter would be preferable. The system communication is possible with cable or bluetooth.
Flue gas analyzer - GreenLine 4000
GreenLine 4000 is a flue gas analyzer which can compute a maximum of 4 gases including O2, CO, NO, SO2 and CxHy and stresses up to 10 types of pre-filled fuels using GasConfig PC software. This equipment can...
Flue gas analyzer - GreenLine 4000
GreenLine 4000 is a flue gas analyzer which can compute a maximum of 4 gases including O2, CO, NO, SO2 and CxHy and stresses up to 10 types of pre-filled fuels using GasConfig PC software. This equipment can be accessed in numerous flue gas versions consisting of various heights and volumes. Additionally, there is a sample probe linked to the device with the help of an individual or twin hose via a water trap and a dispensed fragment line filter.
Moreover, it presents extra features to allow extensive ignition gas analyzer through Air and boiler surface temperature evaluations by particular probes Draft and smoke index evaluations. It utilizes provisional outer hand pump gas spill diagnostics as well as Ionization flame tester. The gas speed can be computed by a Pitot tube linked to the stack diameter.
Moreover, it presents extra features to allow extensive ignition gas analyzer through Air and boiler surface temperature evaluations by particular probes Draft and smoke index evaluations. It utilizes provisional outer hand pump gas spill diagnostics as well as Ionization flame tester. The gas speed can be computed by a Pitot tube linked to the stack diameter.