+7 (812) 645-08-06
Carbon monoxide analyzers (CO)
select brand
Analyzer / carbon monoxyde - 0 - 100 ppm | APMA-370
The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis...
Analyzer / carbon monoxyde - 0 - 100 ppm | APMA-370
The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis method. The APMA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its capability for continuously monitoring and instantaneously analyzing of gas in its unaltered state as well as its minimal maintenance requirements, has been a preferred method for monitoring the atmospheric pollution.
Analyzer / carbon monoxyde - 0 - 100 ppm | T300U
The Model T300U Ultra-Sensitive CO analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. Using IR absorption with a Gas Filter Correlation Wheel, the T300U is designed to allow ultra-sensitive CO measurements while still meeting the requirements for use...
Analyzer / carbon monoxyde - 0 - 100 ppm | T300U
The Model T300U Ultra-Sensitive CO analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. Using IR absorption with a Gas Filter Correlation Wheel, the T300U is designed to allow ultra-sensitive CO measurements while still meeting the requirements for use...
Analyzer / carbon monoxyde - 0 - 1 000 ppm | T300
The Model T300 measures low ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law.
Using a Gas Filter Correlation Wheel, a high energy IR light source is alternately passed through a CO filled...
Using a Gas Filter Correlation Wheel, a high energy IR light source is alternately passed through a CO filled...
Analyzer / carbon monoxyde - 0 - 1 000 ppm | T300
The Model T300 measures low ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law.
Using a Gas Filter Correlation Wheel, a high energy IR light source is alternately passed through a CO filled...
Using a Gas Filter Correlation Wheel, a high energy IR light source is alternately passed through a CO filled...
Analyzer / carbon monoxyde - 0 - 5 000 ppm | T300M
The Model T300M CO analyzer measures low ranges to mid ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. Using a Gas Filter Correlation Wheel, a high-energy IR light source is alternately passed through a CO filled...
Analyzer / carbon monoxyde - 0 - 5 000 ppm | T300M
The Model T300M CO analyzer measures low ranges to mid ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. Using a Gas Filter Correlation Wheel, a high-energy IR light source is alternately passed through a CO filled...
Analyzer / carbon monoxyde - 0 - 5 000 ppm | 300E
Model 300E
The Model 300E measures low ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. This is accomplished with a Gas Filter wheel which alternately allows a high energy light source to pass through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample...
The Model 300E measures low ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. This is accomplished with a Gas Filter wheel which alternately allows a high energy light source to pass through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample...
Analyzer / carbon monoxyde - 0 - 5 000 ppm | 300E
Model 300E
The Model 300E measures low ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. This is accomplished with a Gas Filter wheel which alternately allows a high energy light source to pass through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample cell, which has a folded path of 14 meters.
Model 300EU
The Model 300EU Trace Level Carbon Monoxide analyzer has been designed specifically to address the challenges of background, low level CO monitoring such as that required by the NCore monitoring network. Using a Gas Filter Correlation Wheel, a high energy IR source alternately passes through a CO filled chamber and a chamber with no CO present. The light path then travels
through the sample cell, which has a folded measurement path of 14 meters. The energy loss through the sample cell is compared with the zero reference provided by the gas filter to produce a signal proportional to concentration.
Model 300EM
The Model 300EM measures carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. This is accomplished with a Gas Filter wheel which alternately allows a high energy light source to pass through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample cell, which has a folded path of 14 meters. This technique allows near interferent-free operation.
The Model 300E measures low ranges of carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. This is accomplished with a Gas Filter wheel which alternately allows a high energy light source to pass through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample cell, which has a folded path of 14 meters.
Model 300EU
The Model 300EU Trace Level Carbon Monoxide analyzer has been designed specifically to address the challenges of background, low level CO monitoring such as that required by the NCore monitoring network. Using a Gas Filter Correlation Wheel, a high energy IR source alternately passes through a CO filled chamber and a chamber with no CO present. The light path then travels
through the sample cell, which has a folded measurement path of 14 meters. The energy loss through the sample cell is compared with the zero reference provided by the gas filter to produce a signal proportional to concentration.
Model 300EM
The Model 300EM measures carbon monoxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. This is accomplished with a Gas Filter wheel which alternately allows a high energy light source to pass through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample cell, which has a folded path of 14 meters. This technique allows near interferent-free operation.
Trace analyzer / carbon monoxyde - 0 - 100 ppm | 300EU
The Model 300EU Trace Level Carbon Monoxide analyzer has been designed specifically to address the challenges of background, low level CO monitoring such as that required by the NCore monitoring network. Using a Gas Filter Correlation Wheel, a high energy IR source alternately passes through a CO filled chamber and a chamber with no CO present. The light path then travels
through...
through...
Trace analyzer / carbon monoxyde - 0 - 100 ppm | 300EU
The Model 300EU Trace Level Carbon Monoxide analyzer has been designed specifically to address the challenges of background, low level CO monitoring such as that required by the NCore monitoring network. Using a Gas Filter Correlation Wheel, a high energy IR source alternately passes through a CO filled chamber and a chamber with no CO present. The light path then travels
through...
through...
Multi-gas analyzer / oxygen / carbon monoxyde / carbon dioxide
The CAI Mobile Source Emissions Cart has been designed to provide a compact, self-contained emissions system.
More Information
The complete system is...
More Information
The complete system is...
Multi-gas analyzer / oxygen / carbon monoxyde / carbon dioxide
The CAI Mobile Source Emissions Cart has been designed to provide a compact, self-contained emissions system.
More Information
The complete system is contained in a single bay, roll around cabinet that may be moved to various test sites as required.
This system will allow direct measurement of carbon monoxide, carbon dioxide, oxygen, total hydrocarbons and oxides of nitrogen using proven research grade gas analyzers. All analyzers are Federal Register compliant , ETL and CSA approved and meet U. S. EPA 40 CFR Part 1065 regulations.
Applications
Catalyst R & D
EngineR&D
Gasoline/Diesel Emissions Research
Engine Mapping
More Information
The complete system is contained in a single bay, roll around cabinet that may be moved to various test sites as required.
This system will allow direct measurement of carbon monoxide, carbon dioxide, oxygen, total hydrocarbons and oxides of nitrogen using proven research grade gas analyzers. All analyzers are Federal Register compliant , ETL and CSA approved and meet U. S. EPA 40 CFR Part 1065 regulations.
Applications
Catalyst R & D
EngineR&D
Gasoline/Diesel Emissions Research
Engine Mapping