+7 (812) 645-08-06
Mats, gratings, floor coverings
select brand
Composite grating - Compodeck IFR
Compodeck is a revolutionary product featuring the usual characteristics of composites but with a higher degree of fire resistance compared to other composites. It is designed specifically to meet the high technical standards and safety requirements which are set by the U.S. Coast Guard. Compodeck is specifically...
Composite grating - Compodeck IFR
Compodeck is a revolutionary product featuring the usual characteristics of composites but with a higher degree of fire resistance compared to other composites. It is designed specifically to meet the high technical standards and safety requirements which are set by the U.S. Coast Guard. Compodeck is specifically designed for the shipbuilding sector. This product has passed fire and structural integrity tests after 60 minutes of fire exposure and it was ranked level L1 according to the U.S. Coast Guard PFM 2-98 file memorandum; it can also be used when levels L2 and L3 are required. It can be used for walking surfaces in fire escape routes and fire areas. It can be supplied in a conductive - antistatic / dissipative version so as to prevent static build-up for installations in hazardous areas (oil tanker and gas carrier). In the acrylic resin version it is suitable for use in the engine room or other enclosed spaces.
IFR Version Basic version for use in escape routes and fire areas
CFR Version It is conductive and can also be used in hazardous areas because it does not accumulate static electricity
AFR Version Made of acrylic resin, it can be used in engine rooms or other enclosed spaces
IFR Version Basic version for use in escape routes and fire areas
CFR Version It is conductive and can also be used in hazardous areas because it does not accumulate static electricity
AFR Version Made of acrylic resin, it can be used in engine rooms or other enclosed spaces
Composite grating - Compodeck CFR
Compodeck is a revolutionary product featuring the usual characteristics of composites but with a higher degree of fire resistance compared to other composites. It is designed specifically to meet the high technical standards and safety requirements which are set by the U.S. Coast Guard. Compodeck is specifically...
Composite grating - Compodeck CFR
Compodeck is a revolutionary product featuring the usual characteristics of composites but with a higher degree of fire resistance compared to other composites. It is designed specifically to meet the high technical standards and safety requirements which are set by the U.S. Coast Guard. Compodeck is specifically designed for the shipbuilding sector. This product has passed fire and structural integrity tests after 60 minutes of fire exposure and it was ranked level L1 according to the U.S. Coast Guard PFM 2-98 file memorandum; it can also be used when levels L2 and L3 are required. It can be used for walking surfaces in fire escape routes and fire areas. It can be supplied in a conductive - antistatic / dissipative version so as to prevent static build-up for installations in hazardous areas (oil tanker and gas carrier). In the acrylic resin version it is suitable for use in the engine room or other enclosed spaces.
IFR Version Basic version for use in escape routes and fire areas
CFR Version It is conductive and can also be used in hazardous areas because it does not accumulate static electricity
AFR Version Made of acrylic resin, it can be used in engine rooms or other enclosed spaces
IFR Version Basic version for use in escape routes and fire areas
CFR Version It is conductive and can also be used in hazardous areas because it does not accumulate static electricity
AFR Version Made of acrylic resin, it can be used in engine rooms or other enclosed spaces
Composite grating - Compodeck AFR
Compodeck is a revolutionary product featuring the usual characteristics of composites but with a higher degree of fire resistance compared to other composites. It is designed specifically to meet the high technical standards and safety requirements which are set by the U.S. Coast Guard. Compodeck is specifically...
Composite grating - Compodeck AFR
Compodeck is a revolutionary product featuring the usual characteristics of composites but with a higher degree of fire resistance compared to other composites. It is designed specifically to meet the high technical standards and safety requirements which are set by the U.S. Coast Guard. Compodeck is specifically designed for the shipbuilding sector. This product has passed fire and structural integrity tests after 60 minutes of fire exposure and it was ranked level L1 according to the U.S. Coast Guard PFM 2-98 file memorandum; it can also be used when levels L2 and L3 are required. It can be used for walking surfaces in fire escape routes and fire areas. It can be supplied in a conductive - antistatic / dissipative version so as to prevent static build-up for installations in hazardous areas (oil tanker and gas carrier). In the acrylic resin version it is suitable for use in the engine room or other enclosed spaces.
IFR Version Basic version for use in escape routes and fire areas
CFR Version It is conductive and can also be used in hazardous areas because it does not accumulate static electricity
AFR Version Made of acrylic resin, it can be used in engine rooms or other enclosed spaces
IFR Version Basic version for use in escape routes and fire areas
CFR Version It is conductive and can also be used in hazardous areas because it does not accumulate static electricity
AFR Version Made of acrylic resin, it can be used in engine rooms or other enclosed spaces
Wet area grating - Marinadeck MDK1230
M.M. has developed an innovative product. Thanks to its resistance to brackish environments, its limited thermal expansion, its non-slip characteristics, in accordance with DIN 51097 (suitable for barefoot walking) and...
Wet area grating - Marinadeck MDK1230
M.M. has developed an innovative product. Thanks to its resistance to brackish environments, its limited thermal expansion, its non-slip characteristics, in accordance with DIN 51097 (suitable for barefoot walking) and its UV-resistance, it is the ideal product for walking surfaces of docks and quays in tourist harbours. It is light, easy to install and does not require any maintenance; these characteristics make it the ideal product for the tour operator in seaside areas and private marinas. Available in different colours, it can be easily adapted to each individual environment.
Colors Wood Brown - Aqua Blue - Grass Green (Different color on request)
Sizes mm 1220x3660 1000x4038
Surface finish Anti heel - mesh 8x8 - 20% open area
Thickness mm 30
Anti-slip properties "Q-paint finishing" Classe C - DIN 51097 (Suitable barefoot)
Colors Wood Brown - Aqua Blue - Grass Green (Different color on request)
Sizes mm 1220x3660 1000x4038
Surface finish Anti heel - mesh 8x8 - 20% open area
Thickness mm 30
Anti-slip properties "Q-paint finishing" Classe C - DIN 51097 (Suitable barefoot)
Wet area grating - Marinadeck MDK20152
M.M. has developed an innovative product. Thanks to its resistance to brackish environments, its limited thermal expansion, its non-slip characteristics, in accordance with DIN 51097 (suitable for barefoot walking) and...
Wet area grating - Marinadeck MDK20152
M.M. has developed an innovative product. Thanks to its resistance to brackish environments, its limited thermal expansion, its non-slip characteristics, in accordance with DIN 51097 (suitable for barefoot walking) and its UV-resistance, it is the ideal product for walking surfaces of docks and quays in tourist harbours. It is light, easy to install and does not require any maintenance; these characteristics make it the ideal product for the tour operator in seaside areas and private marinas. Available in different colours, it can be easily adapted to each individual environment.
Colors Wood Brown - Aqua Blue - Grass Green (Different color on request)
Sizes mm1220x3660
Surface finish Drainage system Slatted spacing mm 152
Thickness mm 20
Anti-slip properties "Q-paint finishing" Classe C - DIN 51097 (Suitable barefoot)
Colors Wood Brown - Aqua Blue - Grass Green (Different color on request)
Sizes mm1220x3660
Surface finish Drainage system Slatted spacing mm 152
Thickness mm 20
Anti-slip properties "Q-paint finishing" Classe C - DIN 51097 (Suitable barefoot)
Flooring system polyethylene / steel / eco-friendly - max. 2 900 x 1 900 mm | ECO 29.19
These flooring systems are suitable for the temporary storage and handling
of toxic,...
of toxic,...
Flooring system polyethylene / steel / eco-friendly - max. 2 900 x 1 900 mm | ECO 29.19
These flooring systems are suitable for the temporary storage and handling
of toxic, hazardous and flammable substances in conformity to European
Standards.
They safeguard underground water beds and are thus an integral part of
ecological storage management.
The modular system can be adapted to any floor plan.
of toxic, hazardous and flammable substances in conformity to European
Standards.
They safeguard underground water beds and are thus an integral part of
ecological storage management.
The modular system can be adapted to any floor plan.
Anti-fatigue mat - VYNATAP series
Technical description
COVERING FOR INDUSTRIAL FLOORS. NON-SLIP, NO NOISE, ANTIFATIGUE, STRONG AND HARD WEARING, IT CAN BE LAID QUICKLY ON ANY SURFACE
ANTIFATIGUE: Maximum comfort is ensured by its 16 mm thickness,...
COVERING FOR INDUSTRIAL FLOORS. NON-SLIP, NO NOISE, ANTIFATIGUE, STRONG AND HARD WEARING, IT CAN BE LAID QUICKLY ON ANY SURFACE
ANTIFATIGUE: Maximum comfort is ensured by its 16 mm thickness,...
Anti-fatigue mat - VYNATAP series
Technical description
COVERING FOR INDUSTRIAL FLOORS. NON-SLIP, NO NOISE, ANTIFATIGUE, STRONG AND HARD WEARING, IT CAN BE LAID QUICKLY ON ANY SURFACE
ANTIFATIGUE: Maximum comfort is ensured by its 16 mm thickness, flexibility and softness.
NON-SLIP: The knurled surface and grid structure allow optimum drainage of liquids and oils, offering a safe, non slip tread.
HYGIENIC: Easy to clean with water or steam. Odourless, non absorbent and non retaining
HARD WEARING: Resistant to oils, grease and a great number of chemicals.
INSULATING: Excellent electrical and acoustic insulation, flame retardant, it can be used at low and high temperatures.
RESISTANT: The grid structure guarantees maximum resistance. It does not get worn down by continuous use and neither are its non slip properties altered.
INSTALLATION: Quick and simple. It is easy to cut and shape, adapting to all floor types.
COVERING FOR INDUSTRIAL FLOORS. NON-SLIP, NO NOISE, ANTIFATIGUE, STRONG AND HARD WEARING, IT CAN BE LAID QUICKLY ON ANY SURFACE
ANTIFATIGUE: Maximum comfort is ensured by its 16 mm thickness, flexibility and softness.
NON-SLIP: The knurled surface and grid structure allow optimum drainage of liquids and oils, offering a safe, non slip tread.
HYGIENIC: Easy to clean with water or steam. Odourless, non absorbent and non retaining
HARD WEARING: Resistant to oils, grease and a great number of chemicals.
INSULATING: Excellent electrical and acoustic insulation, flame retardant, it can be used at low and high temperatures.
RESISTANT: The grid structure guarantees maximum resistance. It does not get worn down by continuous use and neither are its non slip properties altered.
INSTALLATION: Quick and simple. It is easy to cut and shape, adapting to all floor types.
Tile for floor / plastic - 1 200 x 600 mm
Technical description
PRACTICAL AND STRONG, THEY ARE USED AROUND MACHINERY,...
PRACTICAL AND STRONG, THEY ARE USED AROUND MACHINERY,...
Tile for floor / plastic - 1 200 x 600 mm
Technical description
PRACTICAL AND STRONG, THEY ARE USED AROUND MACHINERY, WHERE ASSEMBLY AND PACKING ARE DONE, BEHIND THE WORK BENCH AND ANYWHERE WHERE YOU HAVE TO STAND FOR A LONG TIME.
NON SLIP AND ADAPTABLE TO ANY SURFACE, THESE PLATFORMS ARE EASY TO LAY. THEY ARE RESISTANT TO ATMOSPHERIC AGENTS AND CHEMICALS.
PRACTICAL AND STRONG, THEY ARE USED AROUND MACHINERY, WHERE ASSEMBLY AND PACKING ARE DONE, BEHIND THE WORK BENCH AND ANYWHERE WHERE YOU HAVE TO STAND FOR A LONG TIME.
NON SLIP AND ADAPTABLE TO ANY SURFACE, THESE PLATFORMS ARE EASY TO LAY. THEY ARE RESISTANT TO ATMOSPHERIC AGENTS AND CHEMICALS.
Tile for floor - 500 x 500 mm | PROPY PAV
Technical description
MODULAR
A modular polypropylene paving with a system that hooks the various elements together for easier installation.
The...
MODULAR
A modular polypropylene paving with a system that hooks the various elements together for easier installation.
The...
Tile for floor - 500 x 500 mm | PROPY PAV
Technical description
MODULAR
A modular polypropylene paving with a system that hooks the various elements together for easier installation.
The product comes complete with a side and corner joint for even more functional floor paving.
Tested for a working voltage up to 3 kV, has a discharge voltage of 20 kV, a yield strength of 840 kN per square meter. The workload of 210-280 kN per square meter.
Material - polyethylene or polypropylene, resistant to acids, solvents and fats
Colours - wood, black, black PP, green, neutral red, sea blue - Joints: black
Accessories - male and female side fitting, joint.
MODULAR
A modular polypropylene paving with a system that hooks the various elements together for easier installation.
The product comes complete with a side and corner joint for even more functional floor paving.
Tested for a working voltage up to 3 kV, has a discharge voltage of 20 kV, a yield strength of 840 kN per square meter. The workload of 210-280 kN per square meter.
Material - polyethylene or polypropylene, resistant to acids, solvents and fats
Colours - wood, black, black PP, green, neutral red, sea blue - Joints: black
Accessories - male and female side fitting, joint.
Press-welded grating / steel / non-slip
JK Technic electroforged staircase steps are manufactured with a non-skid perforated nose and lateral covers...
Press-welded grating / steel / non-slip
JK Technic electroforged staircase steps are manufactured with a non-skid perforated nose and lateral covers with standard piercing or custom piercing on request. Used in industrial fields for their security mesh and without single notching (on request), JK Technic's staircase steps are suitable for all your projects.
They can be used for straight staircases, balanced steps or even for spiral staircases.
They can be used for straight staircases, balanced steps or even for spiral staircases.
Press-welded grating / shelving / for pallets
JK Technic electroforged gratings for shelving can be used for pallet racks...
Press-welded grating / shelving / for pallets
JK Technic electroforged gratings for shelving can be used for pallet racks and grating cantilevers, for storing heavier loads without the need for increased load absorption by the butt joints. Gratings for shelving are manufactured from S235JR steel and are also available with a pressed finish.
Press-welded grating / galvanized steel / enclosure / for handrails
Electroforged gratings for fencing or solid balustrades are manufactured from galvanised...
Press-welded grating / galvanized steel / enclosure / for handrails
Electroforged gratings for fencing or solid balustrades are manufactured from galvanised steel, with a powder-coated finish to RAL standard if required. They are quick to assemble and offer good resistance. Whether in stadiums, factories, airports or by private individuals, electroforged gratings for fencing are used in a variety of different contexts.
Anti-skid grating / press-welded / for industrial flooring
Electroforged gratings are used in industrial situations as their manufacture...
Anti-skid grating / press-welded / for industrial flooring
Electroforged gratings are used in industrial situations as their manufacture makes them highly resistant and reliable. Manufactured from S235JR steel, electroforged gratings are obtained by affixing twisted squares to bearer bars via electrofusion (see technical characteristics above).
Pressed grating / aluminum / stainless steel / for industrial flooring
Pressed gratings are the most frequently-used gratings in the construction business...
Pressed grating / aluminum / stainless steel / for industrial flooring
Pressed gratings are the most frequently-used gratings in the construction business and by architects, owing to their versatility, ease of assembly, visual appeal and robustness. Manufactured from S235JR steel but also available in 304 or 316 stainless or aluminium, pressed gratings are obtained by fitting insert bars into bearer bars