+7 (812) 645-08-06
Cleaning products
select brand
Aqueous cleaning solution - SWMN, SWMP
The Safewash Mechanical range has been designed to clean and degrease mechanical parts. SWMN is a non-flammable, water-based product that can be sprayed, dipped, brushed or used in batch cleaning systems. SWMN will thoroughly remove dirt and grease deposits facilitating more efficient machinery...
Aqueous cleaning solution - SWMN, SWMP
The Safewash Mechanical range has been designed to clean and degrease mechanical parts. SWMN is a non-flammable, water-based product that can be sprayed, dipped, brushed or used in batch cleaning systems. SWMN will thoroughly remove dirt and grease deposits facilitating more efficient machinery performance. These products have been specifically developed as replacem ents for the toxic and highly hazardous solvents found in other degreasers on the market. They exhibit excellent re sults whilst not compromising the cleaning quality and without displaying any detrimental side effects. The products are packaged in a concentration suitable for immediate use and further dilution is not recommended. SWMN is safe to use on most plastics and rubbers (test before bulk use). SWMN will not normally attack sensitive metals unless they are cleaned many times or the units are immersed for an excessive cleaning period. SWMP is the same as above but with enhanced performance for cle aning very stubborn residues, and is ideal for cleaning of general dirt from metals that are not sensitive to alkalis. The manner by wh ich the products are utilised varies depending on the day-to-day needs involved.
Electrical contact cleaning solution - SWC
A non-flammable solvent/contact lubricant blend designed to remove surface contamination and oxidation from all metallic contact surfaces. Reduces...
Electrical contact cleaning solution - SWC
A non-flammable solvent/contact lubricant blend designed to remove surface contamination and oxidation from all metallic contact surfaces. Reduces electrical resistance across the switch or connector by increasing the surface area of the contact. Ensures long term protection from corrosion and arcing by depositing a fine film of Electrolube Contact Lubricant.
Key Properties:
Provides protection against arcing and corrosion non-flammable, can be used on live equipment
Safe to use on mot plastics
Contains high quality contact treatment oil
Key Properties:
Provides protection against arcing and corrosion non-flammable, can be used on live equipment
Safe to use on mot plastics
Contains high quality contact treatment oil
Cleaning wipe - ECW
Electrolubes Engineers Cleaning Wipes are high quality, lint free cloths designed for general cleaning...
Cleaning wipe - ECW
Electrolubes Engineers Cleaning Wipes are high quality, lint free cloths designed for general cleaning...
Cleaning solution - ROC
A specially formulated micro-emulsion for cleaning reflow ovens and wave solder machines, Reflow Oven Cleaner is designed to remove all types of flux residues. The cleaner is also suitable...
Cleaning solution - ROC
A specially formulated micro-emulsion for cleaning reflow ovens and wave solder machines, Reflow Oven Cleaner is designed to remove all types of flux residues. The cleaner is also suitable for many general degreasing applications. Regular use of Reflow Oven Cleaner will prevent build up of condensed flux.
Key Properties:
Specially formulated micro-emulsion for cleaning reflow ovens and wave solder machines.
Removes all types of flux residues
Suitable for general degreasing applications
Regular use prevents flux build up
Helps maintain efficient running of equipment
Contains inhibitors to prevent corrosion
Low toxicity
non-flammable
low odour
Key Properties:
Specially formulated micro-emulsion for cleaning reflow ovens and wave solder machines.
Removes all types of flux residues
Suitable for general degreasing applications
Regular use prevents flux build up
Helps maintain efficient running of equipment
Contains inhibitors to prevent corrosion
Low toxicity
non-flammable
low odour
Aqueous cleaning solution / biodegradable - SWAS
The Safewash range consists of water based cleaning solvents, suitable for the cleaning of PCBs and production equipment. The Safewash products are water-based, non-flammable, 100% ozone friendly, biodegradable solvent blends designed to clean to well within the world's military cleanliness standards.(ANSI-J-001B/IPC...
Aqueous cleaning solution / biodegradable - SWAS
The Safewash range consists of water based cleaning solvents, suitable for the cleaning of PCBs and production equipment. The Safewash products are water-based, non-flammable, 100% ozone friendly, biodegradable solvent blends designed to clean to well within the world's military cleanliness standards.(ANSI-J-001B/IPC TM-650).
SWAS removes all types of flux residues (RA, RMA, no-clean and water-soluble) quickly and efficiently, with minimal environmental effect using low cost, readily available cleaning equipment. It is ideally suited for the removal of very stubborn flux resides and no-clean fluxes, which can be extremely difficult to remove. SWAS will remove them to military cleanliness standards. It also has a lower odour than the other Safewash variants and is easy to rinse. For spray applications where foam generation may be a problem, an alternative Safewash should be used:
Key Properties:
SWAS is similar to SWAJ but with enhanced cleaning performance. Cleans flux residues and no-clean flux to military cleanliness standards.
Low odour, non-hazardous and for use in batch cleaning systems using ultrasons or spray-under-immersion,
SWAS removes all types of flux residues (RA, RMA, no-clean and water-soluble) quickly and efficiently, with minimal environmental effect using low cost, readily available cleaning equipment. It is ideally suited for the removal of very stubborn flux resides and no-clean fluxes, which can be extremely difficult to remove. SWAS will remove them to military cleanliness standards. It also has a lower odour than the other Safewash variants and is easy to rinse. For spray applications where foam generation may be a problem, an alternative Safewash should be used:
Key Properties:
SWAS is similar to SWAJ but with enhanced cleaning performance. Cleans flux residues and no-clean flux to military cleanliness standards.
Low odour, non-hazardous and for use in batch cleaning systems using ultrasons or spray-under-immersion,
Laboratory cleaning solution - 0.2 l | rea-stabil®
Liquid long-term stabilisation concentrate
for hot water...
for hot water...
Laboratory cleaning solution - 0.2 l | rea-stabil®
Liquid long-term stabilisation concentrate
for hot water baths, thermostats and similar areas of use.
Avoids algae, bacteria and mould formation
Bactericide and fungicide
Non-toxic
Very economical: 0.1 % working concentration
for hot water baths, thermostats and similar areas of use.
Avoids algae, bacteria and mould formation
Bactericide and fungicide
Non-toxic
Very economical: 0.1 % working concentration
Laboratory cleaning solution - 1 l | rea-clar®
Neutralisation and rinsing agent
Particularly suitable as an additive for rinsing water in...
Particularly suitable as an additive for rinsing water in...
Laboratory cleaning solution - 1 l | rea-clar®
Neutralisation and rinsing agent
Particularly suitable as an additive for rinsing water in laboratory rinsing systems.
With good wetting characteristics for glass, porcelain, ceramic, rubber, plastics and metals
Drying of rinsed objects without streaks encouraged
Fruit acids neutralise so
Called spread alkalinity- extremely economical: 0.02 to 0.04 % working concentration
Particularly suitable as an additive for rinsing water in laboratory rinsing systems.
With good wetting characteristics for glass, porcelain, ceramic, rubber, plastics and metals
Drying of rinsed objects without streaks encouraged
Fruit acids neutralise so
Called spread alkalinity- extremely economical: 0.02 to 0.04 % working concentration
Laboratory cleaning solution - 0.5 - 30 l | rea-clean® series
For objects, tiles, fittings, floors and surfaces in all areas of use, particularly suitable for plastic surfaces
Environmentally...
Environmentally...
Laboratory cleaning solution - 0.5 - 30 l | rea-clean® series
For objects, tiles, fittings, floors and surfaces in all areas of use, particularly suitable for plastic surfaces
Environmentally friendly, as it is completely biologically degradable
For spraying or wetting, simply wipe or rinse subsequently
Also for severe dirt, grease and oil contamination
Self-neutralising, self-emulsifying, extremely grease-dissolving
Very economical: 1 litre concentrate produces up to 40 litres working solution
Only mildly alkaline, concentrate has a pH value of 10
Environmentally friendly, as it is completely biologically degradable
For spraying or wetting, simply wipe or rinse subsequently
Also for severe dirt, grease and oil contamination
Self-neutralising, self-emulsifying, extremely grease-dissolving
Very economical: 1 litre concentrate produces up to 40 litres working solution
Only mildly alkaline, concentrate has a pH value of 10
Laboratory cleaning solution - 1 - 30 l | rea-des® 2000 series
For laboratory glass devices and instruments, washable surfaces of all types such as floors, walls, bath tubs, sinks, fittings, toilettes, cabinets, doors, etc. For use in all areas with a risk of infection, such as hospitals,...
Laboratory cleaning solution - 1 - 30 l | rea-des® 2000 series
For laboratory glass devices and instruments, washable surfaces of all types such as floors, walls, bath tubs, sinks, fittings, toilettes, cabinets, doors, etc. For use in all areas with a risk of infection, such as hospitals, doctors practices, the pharmaceutical and food processing industry. Also suitable for senior citizen and nursing homes, schools, kindergartens and large kitchens. The formulation has been tested pursuant to the DGHM VII and DVG (food) directives for surface disinfection and found to be effective in the specified working concentrations. Excellent results in case of high protein load.
Cleans and disinfects in a single working operation
Bactericide, fungicide, virus inactivating in case of hepatitis B and HIV.
Non-corrosive in case of common materials
Rinses off without leaving residue
Economical: 0.8 to 2 % working solution
Cleans and disinfects in a single working operation
Bactericide, fungicide, virus inactivating in case of hepatitis B and HIV.
Non-corrosive in case of common materials
Rinses off without leaving residue
Economical: 0.8 to 2 % working solution
Laboratory cleaning solution - 2 -5 kg | rea-mat® series
For laboratory washing machines, cleaning and disinfection systems. Cleans and disinfects materials such as glass, porcelain,...
Laboratory cleaning solution - 2 -5 kg | rea-mat® series
For laboratory washing machines, cleaning and disinfection systems. Cleans and disinfects materials such as glass, porcelain, rubber, plastics and metals rapidly and carefully of oil, grease, wax, resin, silicone, blood, protein and serum residues.
Good cleaning results, thanks to a high emulsifying and dispersing effect
Free of foam
High degree of material protection
Also suitable for ultrasonic baths
Extremely economical: 0.1 to 0.4 % working concentration
Good cleaning results, thanks to a high emulsifying and dispersing effect
Free of foam
High degree of material protection
Also suitable for ultrasonic baths
Extremely economical: 0.1 to 0.4 % working concentration