+7 (812) 645-08-06
Automation and accessories for industrial doors
select brand
Sliding gate automation / for folding doors / for sectional doors - 230 - 400 V, 4 000 - 6 000 kg | TITANO
Quiko automations reach their maximum power with the TITANO serie heavy duty sliding gate motor.
That industrial sliding gate opener is exclusively made of highly...
Sliding gate automation / for folding doors / for sectional doors - 230 - 400 V, 4 000 - 6 000 kg | TITANO
Quiko automations reach their maximum power with the TITANO serie heavy duty sliding gate motor.
That industrial sliding gate opener is exclusively made of highly resistant components and have been designed for the automation of very heavy sliding gates (up to 6000 Kg). TITANO heavy duty slide gate operator has got a manual unlocking mechanism allowing the gate to be moved if an electrical power black-out situation occurs and the powerful three-phase self-ventilated gearmotor with its oil bath gearbox guarantees intensive use.
The control unit with an inverter and acceleration/deceleration ramps makes the TITANO series industrial slide gate openers very safe and not only extremely powerful.
That industrial sliding gate opener is exclusively made of highly resistant components and have been designed for the automation of very heavy sliding gates (up to 6000 Kg). TITANO heavy duty slide gate operator has got a manual unlocking mechanism allowing the gate to be moved if an electrical power black-out situation occurs and the powerful three-phase self-ventilated gearmotor with its oil bath gearbox guarantees intensive use.
The control unit with an inverter and acceleration/deceleration ramps makes the TITANO series industrial slide gate openers very safe and not only extremely powerful.
Rolling shutter motor - 230 V, 150 - 380 kg | OPERA
OPERA series QUIKO rolling shutter motors, characterized by ease of installation, constitute a complete range to automate rolling shutters of any kind and dimension.
The high working cycle of QUIKO automation for roller shutters...
The high working cycle of QUIKO automation for roller shutters...
Rolling shutter motor - 230 V, 150 - 380 kg | OPERA
OPERA series QUIKO rolling shutter motors, characterized by ease of installation, constitute a complete range to automate rolling shutters of any kind and dimension.
The high working cycle of QUIKO automation for roller shutters...
The high working cycle of QUIKO automation for roller shutters...
Industrial door automation - HERCULES
The HERCULES industrial folding door opener by QUIKO is the right choice for automating various types of industrial doors. QK-H250 industrial door opener is suitable for 2+2 folding doors. The materials used for its construction, i.e. iron,...
Industrial door automation - HERCULES
The HERCULES industrial folding door opener by QUIKO is the right choice for automating various types of industrial doors. QK-H250 industrial door opener is suitable for 2+2 folding doors. The materials used for its construction, i.e. iron, aluminium and steel, guarantee robustness and reliability of the gearmotor for long time.
QK-H250 industrial door openers have been designed for an easy installation and for an absolutely noiseless working.
The high power originated by our industrial door operator is accompanied by an extreme noiseless. Every motor has got built in manual release system so to unlock the motor manually in case of power failure.
Every QUIKO folding door opener has been designed and studied to last for years and it is made of top quality long lasting materials. HERCULES serie industrial door opener will work noiselessly so to become part of the door and let the user forget about it.
QK-H250 industrial door openers have been designed for an easy installation and for an absolutely noiseless working.
The high power originated by our industrial door operator is accompanied by an extreme noiseless. Every motor has got built in manual release system so to unlock the motor manually in case of power failure.
Every QUIKO folding door opener has been designed and studied to last for years and it is made of top quality long lasting materials. HERCULES serie industrial door opener will work noiselessly so to become part of the door and let the user forget about it.
Industrial door automation - HERCULES PLUS
HERCULES PLUS serie industrial roller shutter door opener is the right choice for automating any kind of industrial door. QK-HC industrial door opener is a chain operated gearmotor that allows to automate folding doors as well as industrial sectional/sliding doors.
The materials used for construction,...
The materials used for construction,...
Industrial door automation - HERCULES PLUS
HERCULES PLUS serie industrial roller shutter door opener is the right choice for automating any kind of industrial door. QK-HC industrial door opener is a chain operated gearmotor that allows to automate folding doors as well as industrial sectional/sliding doors.
The materials used for construction, i.e. iron, aluminium, bronze and steel, guarantee robustness and reliability of the gearmotor through time. QK-HC sectional door opener has been designed to be installed easily and to be completely noiseless.
The high power originated by our industrial door openers is accompanied by an extreme noiseless. Every motor has got built in manual release system so to unlock the motor manually in case of power failure.
Dependingly on the weight and the length of the industrial door you want to automate, go through our catalogue and chose between the various available models to find the perfect industrial door motor for your needs.
Every QUIKO industrial door motor have been designed and studied to last for years and it is made of top quality long lasting materials. Our folding door opener will work noiselessly so to become part of the door and let the user forget about it.
The materials used for construction, i.e. iron, aluminium, bronze and steel, guarantee robustness and reliability of the gearmotor through time. QK-HC sectional door opener has been designed to be installed easily and to be completely noiseless.
The high power originated by our industrial door openers is accompanied by an extreme noiseless. Every motor has got built in manual release system so to unlock the motor manually in case of power failure.
Dependingly on the weight and the length of the industrial door you want to automate, go through our catalogue and chose between the various available models to find the perfect industrial door motor for your needs.
Every QUIKO industrial door motor have been designed and studied to last for years and it is made of top quality long lasting materials. Our folding door opener will work noiselessly so to become part of the door and let the user forget about it.
Automation - 24 V, max. 2200 kg, EN12453 | K series
K units are a series of operating devices, with KS control boards builded inside, created for automatic movement of sliding doors and gates weighing up to 2200Kg/4846lbs. They are available in various versions, for easy and functional use anywhere from detached homes or apartment blocks to large company premises.
They...
They...
Automation - 24 V, max. 2200 kg, EN12453 | K series
K units are a series of operating devices, with KS control boards builded inside, created for automatic movement of sliding doors and gates weighing up to 2200Kg/4846lbs. They are available in various versions, for easy and functional use anywhere from detached homes or apartment blocks to large company premises.
They are equipped with gradual start, electronic adjustment of the force, electronic brake (as standard features) and with OPTICAL ENCODER in the PLUS version
The ENCODER, which is included in the PLUS version, indicates when the gate comes into contact with an obstacle, and reverses the movement (as required by new European regulations EN12453, EN12445) without the need to fit edge sensors.
In the version K800 24V, the low voltage motor combined with the encoder also allows slow-down of the gate when shutting, giving the movement a still greater sense of safety and fluidity.
In the event of a power cut your gate will not remain locked because using the customised key provided, you will be able to open it with ease.
K800 24V version with the buffer batterie mean that black-outs will pass totally unnoticed. In fact it is possible to do up to 150 cycles during the black out period on a 3mt long sliding gate.
They are equipped with gradual start, electronic adjustment of the force, electronic brake (as standard features) and with OPTICAL ENCODER in the PLUS version
The ENCODER, which is included in the PLUS version, indicates when the gate comes into contact with an obstacle, and reverses the movement (as required by new European regulations EN12453, EN12445) without the need to fit edge sensors.
In the version K800 24V, the low voltage motor combined with the encoder also allows slow-down of the gate when shutting, giving the movement a still greater sense of safety and fluidity.
In the event of a power cut your gate will not remain locked because using the customised key provided, you will be able to open it with ease.
K800 24V version with the buffer batterie mean that black-outs will pass totally unnoticed. In fact it is possible to do up to 150 cycles during the black out period on a 3mt long sliding gate.
Door operator - 10 m, 2000 kg | R50, T2-CRX
he R50 is designed to operate large doors or gates in applications in which standard actuators cannot be used.
In the event of power failure, simply operate the outer lever, then open the door/gate manually.
R TAKES ON THE HEAVY WEIGHTS
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models:...
In the event of power failure, simply operate the outer lever, then open the door/gate manually.
R TAKES ON THE HEAVY WEIGHTS
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models:...
Door operator - 10 m, 2000 kg | R50, T2-CRX
he R50 is designed to operate large doors or gates in applications in which standard actuators cannot be used.
In the event of power failure, simply operate the outer lever, then open the door/gate manually.
R TAKES ON THE HEAVY WEIGHTS
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models: the R50 and R60. The R60, the only one of its kind currently available on the market, can operate gate leaves weighing up to twelve tonnes.
The heart of the R system is made of an indestructible power unit, enclosed by a casing featuring a neat and practical design. The unit contains an electric motor, speed reducer and rubber-coated drive wheels (1 wheel on R60 model).
Each component is designed to guarantee maximum strength and functionality. The motor is ventilated and protected by thermal probe. All the mechanical components are oil-immersed to ensure maximum durability and the utmost reliability in all ambient conditions.
A special adjustment system optimises ground adherence by adjusting the pressure between the wheel and floor.
INSTALLATION
Certain requirements must be met to allow the installation of the R50 and R60. The main door or gate structure must be solid and not prone to buckling. The floor must be solid and level within the operating radius of the door.
Following installation, maintenance is minimal. The casing, the mechanical engineering of the various components and the special anti-corrosion treatment protect the automation from humidity, dust and rust.
In the event of power failure, simply operate the outer lever, then open the door/gate manually.
R TAKES ON THE HEAVY WEIGHTS
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models: the R50 and R60. The R60, the only one of its kind currently available on the market, can operate gate leaves weighing up to twelve tonnes.
The heart of the R system is made of an indestructible power unit, enclosed by a casing featuring a neat and practical design. The unit contains an electric motor, speed reducer and rubber-coated drive wheels (1 wheel on R60 model).
Each component is designed to guarantee maximum strength and functionality. The motor is ventilated and protected by thermal probe. All the mechanical components are oil-immersed to ensure maximum durability and the utmost reliability in all ambient conditions.
A special adjustment system optimises ground adherence by adjusting the pressure between the wheel and floor.
INSTALLATION
Certain requirements must be met to allow the installation of the R50 and R60. The main door or gate structure must be solid and not prone to buckling. The floor must be solid and level within the operating radius of the door.
Following installation, maintenance is minimal. The casing, the mechanical engineering of the various components and the special anti-corrosion treatment protect the automation from humidity, dust and rust.
Door operator - 15 m, 12000 kg | KS2/R2
R TAKES ON THE HEAVY WEIGHTS
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models: the R50 and R60. The R60, the only one of its kind currently available on the market, can operate gate leaves weighing up to twelve tonnes.
The heart of the R system is made...
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models: the R50 and R60. The R60, the only one of its kind currently available on the market, can operate gate leaves weighing up to twelve tonnes.
The heart of the R system is made...
Door operator - 15 m, 12000 kg | KS2/R2
R TAKES ON THE HEAVY WEIGHTS
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models: the R50 and R60. The R60, the only one of its kind currently available on the market, can operate gate leaves weighing up to twelve tonnes.
The heart of the R system is made of an indestructible power unit, enclosed by a casing featuring a neat and practical design. The unit contains an electric motor, speed reducer and rubber-coated drive wheels (1 wheel on R60 model).
Each component is designed to guarantee maximum strength and functionality. The motor is ventilated and protected by thermal probe. All the mechanical components are oil-immersed to ensure maximum durability and the utmost reliability in all ambient conditions.
A special adjustment system optimises ground adherence by adjusting the pressure between the wheel and floor.
INSTALLATION
Certain requirements must be met to allow the installation of the R50 and R60. The main door or gate structure must be solid and not prone to buckling. The floor must be solid and level within the operating radius of the door.
Following installation, maintenance is minimal. The casing, the mechanical engineering of the various components and the special anti-corrosion treatment protect the automation from humidity, dust and rust.
R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates. The range includes 2 models: the R50 and R60. The R60, the only one of its kind currently available on the market, can operate gate leaves weighing up to twelve tonnes.
The heart of the R system is made of an indestructible power unit, enclosed by a casing featuring a neat and practical design. The unit contains an electric motor, speed reducer and rubber-coated drive wheels (1 wheel on R60 model).
Each component is designed to guarantee maximum strength and functionality. The motor is ventilated and protected by thermal probe. All the mechanical components are oil-immersed to ensure maximum durability and the utmost reliability in all ambient conditions.
A special adjustment system optimises ground adherence by adjusting the pressure between the wheel and floor.
INSTALLATION
Certain requirements must be met to allow the installation of the R50 and R60. The main door or gate structure must be solid and not prone to buckling. The floor must be solid and level within the operating radius of the door.
Following installation, maintenance is minimal. The casing, the mechanical engineering of the various components and the special anti-corrosion treatment protect the automation from humidity, dust and rust.
Door operator - 24 V, 15 - 23 s | BOSS
230V IP44 Version features inbuilt encoder
24V IP44 Version features automatic power sensor i-FORCE
Standard IP44 Protection (protected from sprinkling water arriving from any direction). The IP44 is mandatory in many areas in order to obtain use permits of garages.
Self-adjustment of function time and power with a teach-in function at every...
24V IP44 Version features automatic power sensor i-FORCE
Standard IP44 Protection (protected from sprinkling water arriving from any direction). The IP44 is mandatory in many areas in order to obtain use permits of garages.
Self-adjustment of function time and power with a teach-in function at every...
Door operator - 24 V, 15 - 23 s | BOSS
230V IP44 Version features inbuilt encoder
24V IP44 Version features automatic power sensor i-FORCE
Standard IP44 Protection (protected from sprinkling water arriving from any direction). The IP44 is mandatory in many areas in order to obtain use permits of garages.
Self-adjustment of function time and power with a teach-in function at every cycle in order to forecast increase of friction over time
BOSS complies with regulations EN12453 and EN12445 regarding the impact effects, without the adoption of safety mechanical strips, with balanced garage doors.
Step-by-step Command button on the carter (open-stop-close-stop).....
LED lighting, instead of a light bulb, with a possibility of a connection to door step lamp or indicator
24V version with a possibility of connection to battery charger card to assure constant functioning in case of blackout
MASTER version features control unit that can be centrally installed for doors measuring a surface of up to 9 square metres width up to 2.96 metres.
SLAVE Version to be installed in case of garage door with wicket door, or door wider than 2.96 metres or door whose surface measures more than 9 square metres.
Motor square tube loop for a more rapid, economic installation free of welding.
3 unblock devices (with knob on the carter, lead on garage door handle and personal key).
24V IP44 Version features automatic power sensor i-FORCE
Standard IP44 Protection (protected from sprinkling water arriving from any direction). The IP44 is mandatory in many areas in order to obtain use permits of garages.
Self-adjustment of function time and power with a teach-in function at every cycle in order to forecast increase of friction over time
BOSS complies with regulations EN12453 and EN12445 regarding the impact effects, without the adoption of safety mechanical strips, with balanced garage doors.
Step-by-step Command button on the carter (open-stop-close-stop).....
LED lighting, instead of a light bulb, with a possibility of a connection to door step lamp or indicator
24V version with a possibility of connection to battery charger card to assure constant functioning in case of blackout
MASTER version features control unit that can be centrally installed for doors measuring a surface of up to 9 square metres width up to 2.96 metres.
SLAVE Version to be installed in case of garage door with wicket door, or door wider than 2.96 metres or door whose surface measures more than 9 square metres.
Motor square tube loop for a more rapid, economic installation free of welding.
3 unblock devices (with knob on the carter, lead on garage door handle and personal key).
Sectional door automation / sliding gate / for folding doors - SLIDER
Tamper-proof locking screws
Crankcase automatic lock in open position
RGB led for night time lighting
Reversible motor reductors and transmission units
...
Crankcase automatic lock in open position
RGB led for night time lighting
Reversible motor reductors and transmission units
...
Sectional door automation / sliding gate / for folding doors - SLIDER
Tamper-proof locking screws
Crankcase automatic lock in open position
RGB led for night time lighting
Reversible motor reductors and transmission units
Electric card and battery slot in one single compartment
Easy-to-access connection terminal blocks
Visible leds to help safeties and opening commands checks.
115/230V 50/60 Hz power supply with switching full-range technology
3W - low-consumption standby power
Selflearning of calibration and working parameters
Built-in battery charger
Synchronized management of low-power electromechanical lock
Positioning encoder and obstacle detection.
Crankcase automatic lock in open position
RGB led for night time lighting
Reversible motor reductors and transmission units
Electric card and battery slot in one single compartment
Easy-to-access connection terminal blocks
Visible leds to help safeties and opening commands checks.
115/230V 50/60 Hz power supply with switching full-range technology
3W - low-consumption standby power
Selflearning of calibration and working parameters
Built-in battery charger
Synchronized management of low-power electromechanical lock
Positioning encoder and obstacle detection.
Swing gate automation - max. 800 kg, 5 m | Lux
230V voltage.
Gate weight up to 800kg.
Leaf length up to 5m.
Gate weight up to 800kg.
Leaf length up to 5m.
Swing gate automation - max. 800 kg, 5 m | Lux BT
24V voltage.
Gate weight up to 800kg.
Leaf length up to 5m.
Gate weight up to 800kg.
Leaf length up to 5m.
Swing gate automation - max. 700 kg, 7 m | P7 - 4,5
230V voltage.
Gate weight up to 500kg.
Leaf length up to 7m.
Gate weight up to 500kg.
Leaf length up to 7m.
Swing gate automation - max. 800 kg, 3.5 m | Sub
230V voltage.
Gate weight up to 800kg.
Leaf length up to 3,5m.
Gate weight up to 800kg.
Leaf length up to 3,5m.
