+7 (812) 645-08-06
Indicators, displays
select brand
Digital indicator for strain gauges - ±7 mV/V | AD-4530
Low cost digital indicator for various applications. Suitable for measurement of load, pressure, torque, tension and more at an affordable price.
Digital Zero (DZ) stores zero data at any measurement point. This function can also be used to tare weight. Measurement can simply be restarted when it was interrupted by a loss of power.
Power on zero function adjusts...
Digital Zero (DZ) stores zero data at any measurement point. This function can also be used to tare weight. Measurement can simply be restarted when it was interrupted by a loss of power.
Power on zero function adjusts...
Digital indicator for strain gauges - ±7 mV/V | AD-4530
Low cost digital indicator for various applications. Suitable for measurement of load, pressure, torque, tension and more at an affordable price.
Digital Zero (DZ) stores zero data at any measurement point. This function can also be used to tare weight. Measurement can simply be restarted when it was interrupted by a loss of power.
Power on zero function adjusts to zero when the power is turned on.
Digital filter provides stable measurement results.
Digital span calibration. Easy calibration just by inputting the rated output of a sensor. No need to use a mass.
Unit characters - Up to five alphanumeric characters can be added to serial output.
Comparator function displays and outputs HI, OK and LO according to upper and lower limit settings. Hysterisis width and time can be set to prevent chattering on the output terminal. This reduces load on the relay circuit.
Hold function. Selectable from sample hold, peak hold, bottom hold and bipolar peak hold. The peak hold function allows the user to capture the peak value and easily obtain the maximum value of a destruction test or tightening torque.
Latch function holds display value/comparator (optional)/analog output (optional)/serial output (optional) corresponding to external latch input.
Various data output (optional). Necessary data can be easily obtained using optional comparator relay output, serial output (RS-485/RS-232C), D/A voltage output and D/A current output.
Digital Zero (DZ) stores zero data at any measurement point. This function can also be used to tare weight. Measurement can simply be restarted when it was interrupted by a loss of power.
Power on zero function adjusts to zero when the power is turned on.
Digital filter provides stable measurement results.
Digital span calibration. Easy calibration just by inputting the rated output of a sensor. No need to use a mass.
Unit characters - Up to five alphanumeric characters can be added to serial output.
Comparator function displays and outputs HI, OK and LO according to upper and lower limit settings. Hysterisis width and time can be set to prevent chattering on the output terminal. This reduces load on the relay circuit.
Hold function. Selectable from sample hold, peak hold, bottom hold and bipolar peak hold. The peak hold function allows the user to capture the peak value and easily obtain the maximum value of a destruction test or tightening torque.
Latch function holds display value/comparator (optional)/analog output (optional)/serial output (optional) corresponding to external latch input.
Various data output (optional). Necessary data can be easily obtained using optional comparator relay output, serial output (RS-485/RS-232C), D/A voltage output and D/A current output.
Digital indicator for strain gauges - max. 3 mV/V | AD-4531A
Digitally processed signals with 16 times/s A/D conversion
Peak hold and hold capability
"Hold Mode" data stored digitally to prevent drooping on display and analog output
Comparator function and output.
Analog output with scaling and offset functions
Full digital calibration-Digitally span calibrated by entering...
Peak hold and hold capability
"Hold Mode" data stored digitally to prevent drooping on display and analog output
Comparator function and output.
Analog output with scaling and offset functions
Full digital calibration-Digitally span calibrated by entering...
Digital indicator for strain gauges - max. 3 mV/V | AD-4531A
Digitally processed signals with 16 times/s A/D conversion
Peak hold and hold capability
"Hold Mode" data stored digitally to prevent drooping on display and analog output
Comparator function and output.
Analog output with scaling and offset functions
Full digital calibration-Digitally span calibrated by entering a sensor output voltage
through the keyboard or input using the optional RS-232C interface.
Data digitally held in memory. Hold and analog output are stored without any drooping.
Easy on relieves user of repetitive adjustments.
Compact DIN size body for digital key operating greater installation flexibility.
Averaging time and display update rate can be selected for various applications.
Digital display hold, peak hold and bottom hold.
Replace circuit board and front key board without disconnecting any wires.
Easy, fast and low-cost maintenance. Analog output with offset and scaling functions.
Variety of data outputs: Average, digital peak hold, analog, hysteresis compensation comparison.
Analog low-pass filter removes noise from signal inputs.
RFI/EMI screened to comply with U.S., Canadian and other international regulations.
Either standard data or digital peak data outputs are available through optional RS-232C,
current loop or 4-20mA analog output interface.
Peak hold and hold capability
"Hold Mode" data stored digitally to prevent drooping on display and analog output
Comparator function and output.
Analog output with scaling and offset functions
Full digital calibration-Digitally span calibrated by entering a sensor output voltage
through the keyboard or input using the optional RS-232C interface.
Data digitally held in memory. Hold and analog output are stored without any drooping.
Easy on relieves user of repetitive adjustments.
Compact DIN size body for digital key operating greater installation flexibility.
Averaging time and display update rate can be selected for various applications.
Digital display hold, peak hold and bottom hold.
Replace circuit board and front key board without disconnecting any wires.
Easy, fast and low-cost maintenance. Analog output with offset and scaling functions.
Variety of data outputs: Average, digital peak hold, analog, hysteresis compensation comparison.
Analog low-pass filter removes noise from signal inputs.
RFI/EMI screened to comply with U.S., Canadian and other international regulations.
Either standard data or digital peak data outputs are available through optional RS-232C,
current loop or 4-20mA analog output interface.
Digital indicator for strain gauges - max. 7 mV/V | AD-4531B
Features
Suitable for load, pressure, torque or tension measurement plus more
Digital span calibration possible without using an actual load
...
Suitable for load, pressure, torque or tension measurement plus more
Digital span calibration possible without using an actual load
...
Digital indicator for strain gauges - max. 7 mV/V | AD-4531B
Features
Suitable for load, pressure, torque or tension measurement plus more
Digital span calibration possible without using an actual load
Zero correction value can be backed up
Various output options available
Performs A/D conversion at 100 times per second
Options
AD4530-200 - Relay output
AD4530-030 - RS485
AD4530-040 - RS-232C input/output
AD4530-007 - D/A analog output
AD4530-237 - Relay output, RS485 and D/A analog output
AD4530-247 - Relay output, RS232C and D/A analog output
*The options above cannot be used at the same time.
Suitable for load, pressure, torque or tension measurement plus more
Digital span calibration possible without using an actual load
Zero correction value can be backed up
Various output options available
Performs A/D conversion at 100 times per second
Options
AD4530-200 - Relay output
AD4530-030 - RS485
AD4530-040 - RS-232C input/output
AD4530-007 - D/A analog output
AD4530-237 - Relay output, RS485 and D/A analog output
AD4530-247 - Relay output, RS232C and D/A analog output
*The options above cannot be used at the same time.
Solar-powered indicator - 12.7 mm | 543-50x series
Mitutoyo ABS ID-SS digimatic indicator runs on solar energy, and thus completely removes dependency on batteries, resulting in cost savings, no hassles, and environment-friendliness. As compared to a warehouse,...
Solar-powered indicator - 12.7 mm | 543-50x series
Mitutoyo ABS ID-SS digimatic indicator runs on solar energy, and thus completely removes dependency on batteries, resulting in cost savings, no hassles, and environment-friendliness. As compared to a warehouse, the indicator can operate under minimum (40 lux-lower) light conditions.
ID-SS indicators can be used for longer durations thanks to the high-capacity capacitor recharger (built-in) under below minimum light conditions. The indicators feature large buttons on the front side of the indicator, which allow easy accessibility of functions.
For longer duration or multi-point measurement, the ABS (absolute) sensor is ideal. ABS allows reproduction of a previously-set origin even when inadequate light causes display to disappear, thus making it easier to resume measurement.
ID-SS indicators can be used for longer durations thanks to the high-capacity capacitor recharger (built-in) under below minimum light conditions. The indicators feature large buttons on the front side of the indicator, which allow easy accessibility of functions.
For longer duration or multi-point measurement, the ABS (absolute) sensor is ideal. ABS allows reproduction of a previously-set origin even when inadequate light causes display to disappear, thus making it easier to resume measurement.
Digital display / for laser scan micrometers - 16 digit | 544 series
Display Unit for Lasr Scan Micrometer helps in setting up those values for continuous and consistent monitoring...
Digital display / for laser scan micrometers - 16 digit | 544 series
Display Unit for Lasr Scan Micrometer helps in setting up those values for continuous and consistent monitoring that has been engineered dual-display design. It shows two measurement values simultaneously. The selection can be made from segment measurement (7 segments max) and edge measurement (1 to 255 edges).
There is also inclusion of RS-232C and I/O and analog interface capabilities along with statistical calculation.
There is also inclusion of RS-232C and I/O and analog interface capabilities along with statistical calculation.
LED display module
The LED-Display Assemblies from MOLEX are used to improve manufacturing assembly processes. This LED-display assembly can reduce a component BOM and improve the quality by providing...
LED display module
The LED-Display Assemblies from MOLEX are used to improve manufacturing assembly processes. This LED-display assembly can reduce a component BOM and improve the quality by providing a complete tested assembly and increased visual brightness, decreased light bleed, improved assembly and easier use of curved surfaces. The LED-display assemblies show electronic status from on/off, stop/go , speed, alarm and other indications. This Value can be found by creating a single LED assembly to replace light pipes or bulky and costly wire harnesses. It Eliminates light pipes where products have high numbers of indicators that can significantly simplify mechanical designs and assemblies.