+7 (812) 645-08-06
Rotary unions
select brand
Swivel joint
These rotary couplings, which are available in sizes from 1/4" to 2", work by offsetting the incoming and outgoing flow at a 90° angle to that of the joint's horizontal axis. The coupling will then rotate on...
Swivel joint
These rotary couplings, which are available in sizes from 1/4" to 2", work by offsetting the incoming and outgoing flow at a 90° angle to that of the joint's horizontal axis. The coupling will then rotate on...
High-pressure swivel joint - max. 350 bar
The coupling is used to control the incoming and outgoing flow along the horizontal axis of the joint. It is available in both carbon steel and stainless steel AISI 316 construction. It is available in different sizes from ¼ inches to 2 inches....
High-pressure swivel joint - max. 350 bar
The coupling is used to control the incoming and outgoing flow along the horizontal axis of the joint. It is available in both carbon steel and stainless steel AISI 316 construction. It is available in different sizes from ¼ inches to 2 inches....
Hydraulic swivel joint
In case you were looking for fittings that work well with various water jetting...
Hydraulic swivel joint
In case you were looking for fittings that work well with various water jetting applications, this is one of the products you should take into consideration. In addition to the fact that it has been fully tested to ensure safe and easy operation, this item will also ensure durability and resistance.
Pneumatic rotary union / single-channel - 3/8" | 1129 series
This unit of the Union Popoff Series of rotating unions from Deublin employs the pop-off technology, which...
Pneumatic rotary union / single-channel - 3/8" | 1129 series
This unit of the Union Popoff Series of rotating unions from Deublin employs the pop-off technology, which allows for non-stop dry running without media stress. Its full flow design removes chips or debris obstructions, and its mechanical seals are devised from silicon carbide in order to provide a long operating life despite difficult operating environments. The aluminum casing is also corrosion proof.
Pneumatic rotary union / 2-passage - 1/2" | 1590 series
The Union 1590 series is equipped with a flanged rotor made of cast iron. Designed with a duoflow...
Pneumatic rotary union / 2-passage - 1/2" | 1590 series
The Union 1590 series is equipped with a flanged rotor made of cast iron. Designed with a duoflow structure within an aluminum housing, it provides balanced mechanical seals that are made from carbon graphite and ceramic. The model features a rotating union that supports itself. Furthermore, it requires minimal maintenance with only 3 to 5 drops of oil every month.
Pneumatic rotary union / 2-passage - 3/8" | 1500 series
The pneumatic 2-passage rotary union of the 1500 Series is an air-operated rotary...
Pneumatic rotary union / 2-passage - 3/8" | 1500 series
The pneumatic 2-passage rotary union of the 1500 Series is an air-operated rotary union that features a dual flow mechanism. It is a self-supported revolving union designed with flanged rotor with low force. It is equipped with balanced mechanical seals for maximum media flow. The oil cup consumes only 3 to 5 drops a month.
Pneumatic rotary union / 4-passage - 1/2" | 1479 series
The 1479 series from Deublin is a 1/2" NPT standard seal that is designed with a 4-passage structure. Equipped...
Pneumatic rotary union / 4-passage - 1/2" | 1479 series
The 1479 series from Deublin is a 1/2" NPT standard seal that is designed with a 4-passage structure. Equipped with a flanged stainless steel rotor and special seals, this series operates on a rotating union that supports itself. Its hardened sealing surface and brass housing ensure durability during performance. The ball bearings are spread apart widely to handle side load.
A drain port is available in case of leakage during operations.
A drain port is available in case of leakage during operations.
Single-channel rotary union / oil / air - 1/4" | 17 series
The Union 17 series is equipped with a nickel-plated steel rotor. Designed with an aluminum...
Single-channel rotary union / oil / air - 1/4" | 17 series
The Union 17 series is equipped with a nickel-plated steel rotor. Designed with an aluminum housing and a monoflow structure, this unit features a self-supported rotating union. A felt oiler found in the seal cavity is specially engineered for air service operations. It is also engineered with a special bearing for high quality performance.