+7 (812) 645-08-06
Hardness testers
select brand
Scratch hardness tester - ISO 4586-2 | 413
The scratch hardness tester from Eridshen is a unit that is powered by a 5 rpm drive....
Scratch hardness tester - ISO 4586-2 | 413
The scratch hardness tester from Eridshen is a unit that is powered by a 5 rpm drive. This is ideally used for applications that are concerned with clamping test panels sizing up to 100 x 100 x 22 mm with a 140 mm diameter. The package is supplied with a 2 wights that are within the 1 to 10 N range, a magnifying glass, and a carrying case.
Scratch hardness tester for mechanical tests of coatings - EN ISO 2409, ASTM D 3359 | 430 P-I
The 430 P-I, manufactured by Erichsen, is a scratch hardness tester suitable for mechanical tests of coatings. It comes with...
Scratch hardness tester for mechanical tests of coatings - EN ISO 2409, ASTM D 3359 | 430 P-I
The 430 P-I, manufactured by Erichsen, is a scratch hardness tester suitable for mechanical tests of coatings. It comes with a motor-driven cutting table and positioning control. Furthermore, it has a manually actuated loading force adjustment and manually actuated test panel rotation. The unit has a control plates for cuts of 25 mm/40 mm length and a loading force 50 N without test tip. It also conforms to ECCA T6, VDA 621-411, SNV 37111, GME 60280, DIN EN ISO 2409 and ASTM D 3359 standards.
Indentation hardness tester - DIN 53153 , EN ISO 2815 | 263
The Model 263 from Erichsen is an Indentation Hardness Tester built according to...
Indentation hardness tester - DIN 53153 , EN ISO 2815 | 263
The Model 263 from Erichsen is an Indentation Hardness Tester built according to Buchholz, with an integrated impression body applied onto the test surface. The tool is a steel block that produces a pressure mark. In addition, the device contains different certifications, such as EN ISO 2815, VDA 621-410 and DIN 53153.
Coating hardness tester / paint - PICODENTOR® HM500
The Paint and Coating Hardness Tester from Fischer is available in two models: Fischerscope Hm2000 and Picodentor Hm500R. These instruments have been developed for the hard material coatings in general, such as ultra-thin DLC...
Coating hardness tester / paint - PICODENTOR® HM500
The Paint and Coating Hardness Tester from Fischer is available in two models: Fischerscope Hm2000 and Picodentor Hm500R. These instruments have been developed for the hard material coatings in general, such as ultra-thin DLC...
Universal hardness tester - INTEGRAL
The device is able to control load precision through closed loop load cells. It can be used for testing different hardness procedures. Control is via a built-in computer. The menu can be used for selecting...
Universal hardness tester - INTEGRAL
The device is able to control load precision through closed loop load cells. It can be used for testing different hardness procedures. Control is via a built-in computer. The menu can be used for selecting loads and automatic test scales and the test cycle is completely automated. The device is shock proof as well as protected against dust and other pollutants. It can be installed in casting and forging houses.
The device can offer Brinell and Vickers readings through integrated camera and monitor. It provides automatic focus with piece presser. The instrument prints out impression image and the specimen surface. It can store large amounts of data and offers file management capabilities. The device provides perfect and effective measure even at the first test.
The device can offer Brinell and Vickers readings through integrated camera and monitor. It provides automatic focus with piece presser. The instrument prints out impression image and the specimen surface. It can store large amounts of data and offers file management capabilities. The device provides perfect and effective measure even at the first test.
Hardness tester with image analysis - MAXI INTEGRAL
The Maxi Intergral Series, manufactured by EayDur®, is a fully automated testing cycle HBW/HV that is managed by a powerful computer installed on the machine that is equipped with a hard disk, and a...
Hardness tester with image analysis - MAXI INTEGRAL
The Maxi Intergral Series, manufactured by EayDur®, is a fully automated testing cycle HBW/HV that is managed by a powerful computer installed on the machine that is equipped with a hard disk, and a...
Brinell hardness tester - KREIS 3000
The easydur is specially used in manufacturing large size hardness testers which have an option of mining and are capable of carrying out the Brinell test for as much as 3000 kgs. The testing cycle is fully automatic and in has the workpiece surface preparation. The milling is an...
Brinell hardness tester - KREIS 3000
The easydur is specially used in manufacturing large size hardness testers which have an option of mining and are capable of carrying out the Brinell test for as much as 3000 kgs. The testing cycle is fully automatic and in has the workpiece surface preparation. The milling is an essential added benefit of this device.
Testing can be done on both the large pieces like a 6 Metre diameter forged ring or small pieces .
The equipment has a stop piece pin that is hydraulic in nature which is utilized before the test cycle operations start.
There is an camera and a special software developed specially by easydur which can work on a Windows XP operating system. Both of these are used to give accurate and correct results.
Main Features
It has a hardness tester with an option of milling for the brinell tests.
The closed loop cells are used to give precision in controlling.
The instrument comes with a built in computer for measurement.
Menu contains a selection of test scales and loads.
Has a fully automatic test cycle.
Testing can be done on both the large pieces like a 6 Metre diameter forged ring or small pieces .
The equipment has a stop piece pin that is hydraulic in nature which is utilized before the test cycle operations start.
There is an camera and a special software developed specially by easydur which can work on a Windows XP operating system. Both of these are used to give accurate and correct results.
Main Features
It has a hardness tester with an option of milling for the brinell tests.
The closed loop cells are used to give precision in controlling.
The instrument comes with a built in computer for measurement.
Menu contains a selection of test scales and loads.
Has a fully automatic test cycle.
Brinell hardness tester / automatic - INTEGRAL INLINE
The Integral Inline is an automatic hardness tester developed by Easydur Italiana. It...
Brinell hardness tester / automatic - INTEGRAL INLINE
The Integral Inline is an automatic hardness tester developed by Easydur Italiana. It is mainly used for Brinell tests from 187.5 to 750 Kg performed on cylinders with various range of sizes. In addition, the unit is equipped with optical measurement through camera, 60 cylinders maximum production, and 3 tests for each cylinder.
Brinell hardness tester - EasyBrinell
EASYBRINELL is a portable probe that allows automatic image analysis for Brinell tests, with a capacity between 1 and 3,000 kg. In addition to this, when it comes to instrument management is conducted by use of a built-in tablet, while the selection of...
Brinell hardness tester - EasyBrinell
EASYBRINELL is a portable probe that allows automatic image analysis for Brinell tests, with a capacity between 1 and 3,000 kg. In addition to this, when it comes to instrument management is conducted by use of a built-in tablet, while the selection of loads and automatic test scales are possible from the menu. The absolute measurement device is valid at the first test, and it is also possible to perform tests on surfaces that are uncleaned or untreated.
This product is also ideal for use with foundries or forging workshops, while the Brinell indentation system can be read by a built-in camera, as well as a monitor that comes with very high definition electornic instruments. Note that the precision of 1 micron and the enlargements from 20 to 400 x make this product useful for various applications, while the entire measurement cycle is automatic. The image of the indentation and of the surface of the test piece can be exported, and it is also possible to export the test certificate.
This product is also ideal for use with foundries or forging workshops, while the Brinell indentation system can be read by a built-in camera, as well as a monitor that comes with very high definition electornic instruments. Note that the precision of 1 micron and the enlargements from 20 to 400 x make this product useful for various applications, while the entire measurement cycle is automatic. The image of the indentation and of the surface of the test piece can be exported, and it is also possible to export the test certificate.