+7 (812) 645-08-06
Hose clamps
select brand
Mixer impeller / circular-flow
Gas/liquid reactions with technically pure gases, especially hydrogenations
Combination of EKATO...
Combination of EKATO...
Mixer impeller / circular-flow
Gas/liquid reactions with technically pure gases, especially hydrogenations
Combination of EKATO PHASEJET and EKATO GASJET
Combines internal gas recirculation with high gas rates
Complete conversion of the gas
High mass transfer enables high conversion rates
Safe inclusion of the complete reactor contents including the reaction gas
Batchwise and continuous operation possible
Combination of EKATO PHASEJET and EKATO GASJET
Combines internal gas recirculation with high gas rates
Complete conversion of the gas
High mass transfer enables high conversion rates
Safe inclusion of the complete reactor contents including the reaction gas
Batchwise and continuous operation possible
Mixer impeller / radial-flow - PHASEJET
Gas/liquid reactions, bioreactors, gassed suspensions
Radial flow direction
...
Radial flow direction
...
Mixer impeller / radial-flow - PHASEJET
Gas/liquid reactions, bioreactors, gassed suspensions
Radial flow direction
Primary disperser for large gas quantities
Homogeneity in the process medium, even with high gas flows, high mass transfer capability
Stable performance and pump capacity, low hydraulic forces
Also operates without sparg ring
Radial flow direction
Primary disperser for large gas quantities
Homogeneity in the process medium, even with high gas flows, high mass transfer capability
Stable performance and pump capacity, low hydraulic forces
Also operates without sparg ring
Mixer impeller / 2-blade / axial-flow - VISCOPROP
Universal impeller for blending, suspension, heat transfer and dispersion
High mixing efficiency...
High mixing efficiency...
Mixer impeller / 2-blade / axial-flow - VISCOPROP
Universal impeller for blending, suspension, heat transfer and dispersion
High mixing efficiency for low and medium viscous media
High flow velocities on the vessel bottom for the suspension of solids
High axial flow velocities on the vessel wall for better heat transfer
Single / multistage impeller arrangement
Two, three or four bladed impeller design
Customized angle of inclination
High mixing efficiency for low and medium viscous media
High flow velocities on the vessel bottom for the suspension of solids
High axial flow velocities on the vessel wall for better heat transfer
Single / multistage impeller arrangement
Two, three or four bladed impeller design
Customized angle of inclination
Mixer impeller / 3-blade / axial-flow - XE-3
XE-3 is a highly competent turbulent flow impeller perfect for blending, heat transfer and...
Mixer impeller / 3-blade / axial-flow - XE-3
XE-3 is a highly competent turbulent flow impeller perfect for blending, heat transfer and solids suspension applications. It is designed to offer highest strength at lower weights in contrast to other axial flow impellers. It permits longer shafts without internal support, smaller shaft diameters and also smaller seal sizes wherever possible.
Mixer impeller / 3-blade / axial-flow - SC-3
The chemineer® SC-3 impeller is used in deep tanks due to an advanced engineering design. It is able to produce...
Mixer impeller / 3-blade / axial-flow - SC-3
The chemineer® SC-3 impeller is used in deep tanks due to an advanced engineering design. It is able to produce...
Mixer impeller / 3-blade / axial-flow - A100
The A100 by Lightnin is a Mixer impeller which comes with a smaller diameter and...
Mixer impeller / 3-blade / axial-flow - A100
The A100 by Lightnin is a Mixer impeller which comes with a smaller diameter and direct drive application. For this specific unit, it comes with a super pitch design. For greater mixing capabilities, it has a pitch ratio of about 1.5. The unit can also have a ring guard which prevents damage coming external factors.
Mixer impeller / 4-blade / axial-flow - A245
The A245 is manufactured by SPX, and is a surface aerator which is based on the...
Mixer impeller / 4-blade / axial-flow - A245
The A245 is manufactured by SPX, and is a surface aerator which is based on the patented technology, which comes with a splash guard that enhances the aeration effectiveness by channeling water. It is available in wide variety of models and features, which can be utilized in various range of applications.
Mixer impeller / axial-flow - A312
The A312 series is manufactured by SPX, and is a side entry hydrofoil that intended...
Mixer impeller / axial-flow - A312
The A312 series is manufactured by SPX, and is a side entry hydrofoil that intended for extreme pump and paper requisitions, which is also utilized in other side-entry requisitions including oil storage. It is recommended for axial-flow impeller for side-entry applications, which is available in wide variety of models and features.