+7 (812) 645-08-06
DC servo-motors
select brand
DC electric servo-motor - 0.3 - 8 Nm | RX series
The Parker RX DC Servo motor features a class F insulation with a connection characterized by output cables with a measurement of 1 m without a...
DC electric servo-motor - 0.3 - 8 Nm | RX series
The Parker RX DC Servo motor features a class F insulation with a connection characterized by output cables with a measurement of 1 m without a connector. It attributes CC Motors with rare ferrite magnets motor type and with a subdued torque modulation. Moreover, the product offers users an optimum speed control featured by the RX motors, supported by the RTS Series of servo amplifiers. It also offers users a high construction quality and a good performance ratio with very a long life span. This device is suitable in electro-erosion cutting and other applications.
DC electric servo-motor / high-performance - 0.05 - 13 Nm | RS series
By making use of high power magnets, RS direct current motors pooled with RTS drives are mostly appropriate for applications, which need an extremely solid resolution or an elevated active level. Features and benefits...
DC electric servo-motor / high-performance - 0.05 - 13 Nm | RS series
By making use of high power magnets, RS direct current motors pooled with RTS drives are mostly appropriate for applications, which need an extremely solid resolution or an elevated active level. Features and benefits include outstanding low-velocity working, high presentation features, high density, rare earth magnets, extremely extended life span, tachy, encoder resolver and brake in alternative. Illustrations of uses: Owing to their presentation levels, RS motors are mostly appropriate for appliances with elevated dynamic levels: tiny dimension gantries and robotics, choose and position of electronic parts, office knowledge such as copiers, printers, post sorting, magnetic tape winders, etc., most favorable velocity control of the RS motors is offered by the RTS sequence of servo amplifiers, textile slicing such as laser, knife, laser, etc.
DC electric servo-motor - IP43 | DC 100
The DC 100 is a DC electric servo-motor with brushes developed by isel Germany. It is designed...
DC electric servo-motor - IP43 | DC 100
The DC 100 is a DC electric servo-motor with brushes developed by isel Germany. It is designed with low-resistance winding construction with good dynamic response. The motor comes with 2 finger brushes which has long service life. It is equipped with an IP 43 degree of protection, on the other hand, the encoder has an IP 50 degree of protection.
DC electric servo-motor - 30 Ncm | DC100
The DC100 Series, manufactured by Isel, is a DC electric servo-motor equipped with two-finger...
DC electric servo-motor - 30 Ncm | DC100
The DC100 Series, manufactured by Isel, is a DC electric servo-motor equipped with two-finger brush. It has a voltage supply of 48 V, no load speed range of 3,400 ratio per minute, peak current of 6.5 A, and rated torque of 30 Ncm. The servo-motor is used in applications involving robotics, CNC machinery, or automated manufacturing.
