+7 (812) 645-08-06
Accessories and consumables for clutches/brakes
select brand
Slave cylinder - 1 500 psi
Slave Cylinders
Used for remote clutch and throttle actuation. These slave cylinders are available in a variety of special strokes, mountings, and capacities.
Used for remote clutch and throttle actuation. These slave cylinders are available in a variety of special strokes, mountings, and capacities.
Master cylinder - 8 - 16 psi
Brake Cylinders - Master
Brake fluid and mineral base hydraulic oil models with bore diameters from 0.75 to 2.25 inches and stroke ranges of 1.12 to 2.61 inches. Side and flange mounting styles are available. Most models are available with or without a residual check valve.
Brake fluid and mineral base hydraulic oil models with bore diameters from 0.75 to 2.25 inches and stroke ranges of 1.12 to 2.61 inches. Side and flange mounting styles are available. Most models are available with or without a residual check valve.
Automatic brake tension control - MC
Simple and reliable mechanical-pneumatic devices designed to control the...
Automatic brake tension control - MC
Simple and reliable mechanical-pneumatic devices designed to control the web tension in unwinding or winding applications. The roll diameter variation is detected by a proportional valve which changes the air pressure supplied to the brake. Available with built-in manometer too.
Clutch and brake plate - max. 1 600 Nm
For dry- and wet-running clutches and brakes, Ortlinghaus is able to provide a very comprehensive range of plates. The plates and the friction surface are important functional elements in every...
Clutch and brake plate - max. 1 600 Nm
For dry- and wet-running clutches and brakes, Ortlinghaus is able to provide a very comprehensive range of plates. The plates and the friction surface are important functional elements in every clutch and brake, and have been developed in many different ways since the early days of clutches and brakes. The choice of friction system depends on the application: in general, one plate with friction material works together with a counterplate of steel or cast iron. The inner and outer plates are mounted with the other drive components by lugs and slots, and the spline is in accordance with DIN 867 and DIN 5480 as well as other standards. In addition, holes in the plate for studs and special shapes in accordance with customer requirements are available.