+7 (812) 645-08-06
Lubrication accessories
select brand
Injector volumetric - 210
Provides constant-rate syringe injections for liquid or gas samples. The injection rate and volume is fully configurable from the CiSmart software, no need to learn two different software pacts. The Model 210 is designed for very small sample volumes.
Injector - 9610
The 9610 liquid auto-injector eliminates the need for manual syringe injections. It provides multiple bursts of your...
Injector - 9610
The 9610 liquid auto-injector eliminates the need for manual syringe injections. It provides multiple bursts of your sample into the analyzer (not to be confused with the model 210). It has accurate and repeatable sample introduction eliminating possible human error when introducing the sample into the analyzer. The Model 9610 is used when performing Total Sulfur, Total Nitrogen, or Total Chlorides analyses with Model 2010L, 2020L, and 9600L.
Chain lubrication pinion - -30 - +150 °C; max 5m/s | Lubricus
Chain lubrication pinion guide the lubricant through the shaft and the corresponding bores into the cellular plastic material, the plastic pinion guarantees smooth running. The rolls made of open cell PU foam are transporting at certain points the lubricant to the surface of the link plates of the roller chains. In the shafts there is a check valve integrated which prevents uncontrolled escaping...
Chain lubrication pinion - -30 - +150 °C; max 5m/s | Lubricus
Chain lubrication pinion guide the lubricant through the shaft and the corresponding bores into the cellular plastic material, the plastic pinion guarantees smooth running. The rolls made of open cell PU foam are transporting at certain points the lubricant to the surface of the link plates of the roller chains. In the shafts there is a check valve integrated which prevents uncontrolled escaping...
Lubrication gear - -30C - +150 °C, max 5m/s | Lubricus
With the Lubricus lubrication gear an optimum supply of gearings will be ensured over very long periods of time. Supply of the lubricant is made variably by the Lubricus lubrication system. The lubricant is guided through the shaft and corresponding bores into the cellular material. Under low contact...
Lubrication gear - -30C - +150 °C, max 5m/s | Lubricus
With the Lubricus lubrication gear an optimum supply of gearings will be ensured over very long periods of time. Supply of the lubricant is made variably by the Lubricus lubrication system. The lubricant is guided through the shaft and corresponding bores into the cellular material. Under low contact...