+7 (812) 645-08-06
Turning-grinding machines
select brand
Vertical turning center - max. ø 100 mm | VTC 100 GT
The VTC 100 GT Turning and Grinding machine is a complete solution for shanks that offers an instant process for firm tuning and crushing. The device turret carries all turning functions while the crushing...
Vertical turning center - max. ø 100 mm | VTC 100 GT
The VTC 100 GT Turning and Grinding machine is a complete solution for shanks that offers an instant process for firm tuning and crushing. The device turret carries all turning functions while the crushing happens at the second terminal. This makes the the VTC 100 GT Turning and Grinding machine an ideal manufacturing device for the total machining of cylindrical bearing chairs, shoulders and furrows. Additionally, it has a one clamping operation where the original failures caused by independent clamping works are decreased.
It needs to be observed that the element can vary any tie and the machines are instantly re-arranged for shifting machining jobs. Moreover, efficient arrangement of complicated blending processes is also possible with the EMAG Turning and Grinding machine.
It needs to be observed that the element can vary any tie and the machines are instantly re-arranged for shifting machining jobs. Moreover, efficient arrangement of complicated blending processes is also possible with the EMAG Turning and Grinding machine.
Vertical turning center - max. ø 100 mm | VLC 100 GT
The VLC 100 GT is a vertical finishing machine engineered by EMAG. It is efficient to use in the production of small chucked components in large quantities.
The machine...
The machine...
Vertical turning center - max. ø 100 mm | VLC 100 GT
The VLC 100 GT is a vertical finishing machine engineered by EMAG. It is efficient to use in the production of small chucked components in large quantities.
The machine is suitable for finishing chucked parts with a maximum diameter of 100mm. It can operate together with VL 2 or VLC 100 turning machines also from EMAG. The compact production system of the machine can satisfy any machining requirements. Furthermore, it ensures short idle time and high productivity.
The machine features a pick-up system to load the machine itself. While one component is being ground, the operator or an automation system can place the next raw part on the revolving transport belt, providing reduced downtime.
The machine is suitable for finishing chucked parts with a maximum diameter of 100mm. It can operate together with VL 2 or VLC 100 turning machines also from EMAG. The compact production system of the machine can satisfy any machining requirements. Furthermore, it ensures short idle time and high productivity.
The machine features a pick-up system to load the machine itself. While one component is being ground, the operator or an automation system can place the next raw part on the revolving transport belt, providing reduced downtime.
Vertical turning center - max. 850 x 315 x 315 mm | VSC DS, DDS
The advanced turning and grinding center of this product series was designed specifically for low-cost applications, being useful for precision machining of medium to large...
Vertical turning center - max. 850 x 315 x 315 mm | VSC DS, DDS
The advanced turning and grinding center of this product series was designed specifically for low-cost applications, being useful for precision machining of medium to large component matches. Some example applications include chain wheels, gearwheels, sliding sleeves, link pins, rocker arms, piston rings and bearing rings.
The quality and workpiece requirements are the main factors when it comes to deciding which of the available machining processes is best and is able to save the most money. The flexibility offered allow users to select the best technology for any application, including scroll-free grinding and turning, along with hard turning, all on a single machine.
The quality and workpiece requirements are the main factors when it comes to deciding which of the available machining processes is best and is able to save the most money. The flexibility offered allow users to select the best technology for any application, including scroll-free grinding and turning, along with hard turning, all on a single machine.
Vertical turning center - max. 1600 x 1600 x 300 mm | VLC 250 DS
VLC 250 DS are turning and grinding centers that come with vertical work spindle and tools positioned below the workpiece, which offers the best possible flow conditions for the chip. When it...
Vertical turning center - max. 1600 x 1600 x 300 mm | VLC 250 DS
VLC 250 DS are turning and grinding centers that come with vertical work spindle and tools positioned below the workpiece, which offers the best possible flow conditions for the chip. When it comes to combination machines, this is a vital requirement.
All modules in the machine are resistant to vibrations and are mechanically sturdy. In addition to this, the polymer concrete used for the construction of the machine base comes with great vibration dampening properties. The tooling systems are anchored in the base of the machine, while the grinding centers provide a stable basis for grinding and turning operations.
If users want to achieve the best surface finish and complete hard pre-turning work, this item will always be useful.
All modules in the machine are resistant to vibrations and are mechanically sturdy. In addition to this, the polymer concrete used for the construction of the machine base comes with great vibration dampening properties. The tooling systems are anchored in the base of the machine, while the grinding centers provide a stable basis for grinding and turning operations.
If users want to achieve the best surface finish and complete hard pre-turning work, this item will always be useful.
Vertical turning center - max. ø 100 mm | VG 110
The VG110 from EMAG is a vertical face grinder engineered mainly for machining purposes. These face grinders showcase a number of grinding technologies, including grinding tools, sensor technologies, and dressing technologies. These technologies enable...
Vertical turning center - max. ø 100 mm | VG 110
The VG110 from EMAG is a vertical face grinder engineered mainly for machining purposes. These face grinders showcase a number of grinding technologies, including grinding tools, sensor technologies, and dressing technologies. These technologies enable the device to exhibit an adaptive grinding capability, an initial cut detection capacity, a touch dressing function, and a dressing spindle capability. Aside from these capabilities, VG110 grinding machine from EMAG also highlights a 100-millimeter to 190-millimeter chunk maximum range, a 125-millimeter swing diameter, a 60-millimeter maximum machining diameter, and a 100-millimeter nominal workpiece diameter. These factors allow the machine to be utilized for a variety of applications.
With benefits like a pinpoint accuracy rating, minimal time span of chip-to-chip consolidation, and nearly non-existent footprint, the VG110 from EMAG is certainly one of the most reliable vertical face grinders out on the market today.
With benefits like a pinpoint accuracy rating, minimal time span of chip-to-chip consolidation, and nearly non-existent footprint, the VG110 from EMAG is certainly one of the most reliable vertical face grinders out on the market today.
Horizontal turning center - max. 150 mm | R200, R300
The R200/R300 is a horizontal turn-grid center which is ideal for front and rear end machining in 5 degrees.
Its...
Its...
Horizontal turning center - max. 150 mm | R200, R300
The R200/R300 is a horizontal turn-grid center which is ideal for front and rear end machining in 5 degrees.
Its...
Its...
Vertical turning center - max. ø 400 mm | V160C
The Vertical Turn-Grind Center V160C is used in the operation of the chuck parts that needs internal and external applications.
The...
The...
Vertical turning center - max. ø 400 mm | V160C
The Vertical Turn-Grind Center V160C is used in the operation of the chuck parts that needs internal and external applications.
The equipment has diverse features such as O.D spindle units which has an INDEX motor for high accuracy through large anti-friction bearings.
It also has I.D spindle units for servodriven anti-friction bearing spindles, CBN tools can also be utilized, dressing cycles, wheel contact detection and grinding wheel balancing are electronic.
Moreover, it has in-process measuring operation and basic set up.
The equipment has diverse features such as O.D spindle units which has an INDEX motor for high accuracy through large anti-friction bearings.
It also has I.D spindle units for servodriven anti-friction bearing spindles, CBN tools can also be utilized, dressing cycles, wheel contact detection and grinding wheel balancing are electronic.
Moreover, it has in-process measuring operation and basic set up.
Milling turning center / high-speed / high-efficiency - max. 1 150 x 1 000 x 700 mm | ULTRIX
The Ultirix is a 4/5-axis CNC-operated high speed multitask machining center that...
Milling turning center / high-speed / high-efficiency - max. 1 150 x 1 000 x 700 mm | ULTRIX
The Ultirix is a 4/5-axis CNC-operated high speed multitask machining center that is specifically designed for milling as well as horizontal and vertical turning and grinding applications. It is equipped with a vertical spindle and a rotary tilting table complete with a movable crossbeam all in a single gantry design.