+7 (812) 645-08-06
Shrink tunnels, shrink guns...
select brand
Shrink tunnel - DERAY® FST series
The Heat Shrink Tubing by DSG-Canusa is specially designed with a modern and sophisticated finish which provides...
Shrink tunnel - DERAY® FST series
The Heat Shrink Tubing by DSG-Canusa is specially designed with a modern and sophisticated finish which provides...
Shrink tunnel - DERAY® WorkMan / TP
The Deray Board WorkMan/TP manufactured by DSG-Canusa is a shrink tunnel designed...
Shrink tunnel - DERAY® WorkMan / TP
The Deray Board WorkMan/TP manufactured by DSG-Canusa is a shrink tunnel designed for insulation and sealing task for wiring system via heat shrink product. The equipment is compatible to use with wire harness series production. With this assembly, it will sure meet a certain demand of wire harness application and operations.
Shrink tunnel - 6.5 - 9 kW, max. 450 x 1000 x 350 mm | BS series
A reduced heat tunnel which is compatible with every kind of heat-shrinkable films comprising all the angular...
Shrink tunnel - 6.5 - 9 kW, max. 450 x 1000 x 350 mm | BS series
A reduced heat tunnel which is compatible with every kind of heat-shrinkable films comprising all the angular sealers. BS-LINE reducing tunnel which integrates stainless steel heater and a high performing blowing motor for the shrinking tunnel. It has a characteristic heat-up with strong and balanced blowing. There is flexible conveying speed and temperature of the tunnel as per output requirements of different object sizes.
Shrink gun / for pallets - 27 kW
FIREPACK GAS SHRINK GUN., complete with hose and regulator (gas cylinder not included)....
Shrink gun / for pallets - 27 kW
FIREPACK GAS SHRINK GUN., complete with hose and regulator (gas cylinder not included). For heat shrinking, shrink-wrapping around loads, pallets and parcels. Fitted with "dead man" trigger to prevent accidental operation, and nozzle heat protection cowl. Easy to use simply squeeze the trigger which fires the igniter and aim at a pallet cover.
Over-packing shrink oven - max. 180 p/h | FT 40
The Shrink oven FT 40 from Bocedi allows the shrinking of palletized materials using air that recycled in its stainless steel ring...
Over-packing shrink oven - max. 180 p/h | FT 40
The Shrink oven FT 40 from Bocedi allows the shrinking of palletized materials using air that recycled in its stainless steel ring with welded pallet.
This machine operates with different types of low-pressure gas which helps minimize the generation of energy waste. The FT 40 also allows the insertion a lifting pallet apparatus to enable the shrink film to be installed on the bottom part of the pallet.
It is works at a rate over 180 p/h and is also offered in the electrical resistance version.
This machine operates with different types of low-pressure gas which helps minimize the generation of energy waste. The FT 40 also allows the insertion a lifting pallet apparatus to enable the shrink film to be installed on the bottom part of the pallet.
It is works at a rate over 180 p/h and is also offered in the electrical resistance version.
Over-packing shrink oven - max. 150 p/h | FT 20, FT 30 series
These ring shrink ovens come in different models: the FT 30, FT 20 and FT 30XL. They are designed to allow for the shrinking of palletized loads through...
Over-packing shrink oven - max. 150 p/h | FT 20, FT 30 series
These ring shrink ovens come in different models: the FT 30, FT 20 and FT 30XL. They are designed to allow for the shrinking of palletized loads through the use of air. A stainless steel ring is featured with a fixed pallet. The machines all work with a variety of types of low-pressure gases, which helps to reduce almost all energy wastage. It is possible to install a lifting pallet mechanism that allows for the shrink film to be fixed on the pallets interior extremity.
The FT 30 model has an hourly capacity exceeding 150p/h, while the FT 20 model has a capacity exceeding 150p/h too.
The FT 30 model has an hourly capacity exceeding 150p/h, while the FT 20 model has a capacity exceeding 150p/h too.
Gas shrink oven / for over-packing - max. 150 p/h
The tunnel shrink oven working with gas from VFB is allowed the shrinking of palletized...
Gas shrink oven / for over-packing - max. 150 p/h
The tunnel shrink oven working with gas from VFB is allowed the shrinking of palletized loads over the warm air without free flame with a less waste of energy. It is possible to put a lifting pallet device which lets the shrink film to be steady on the extreme inferior of the pallet itself. The product is suitable with different kinds of gas.
Over-packing shrink oven - max. 150 p/h
The Electric Tunnel Shrink Oven consists of 2 versions which are automatic and semi-automatic. They...
Over-packing shrink oven - max. 150 p/h
The Electric Tunnel Shrink Oven consists of 2 versions which are automatic and semi-automatic. They operate using electrical energy. These equipment functions by enabling the shrinking process of palletized loads with the use of warm air in a flame-free area with minimum energy consumption. A lifting pallet tool may be inserted to attach the shrink film on the lower part of the pallet.
Over-packing shrink oven - Rotomatic 60
The Rotomatic 60 by Officina Bocedi is a shrink oven designed for repackaging . The machine...
Over-packing shrink oven - Rotomatic 60
The Rotomatic 60 by Officina Bocedi is a shrink oven designed for repackaging . The machine is fully compatible to all type of low pressure gas which make the unit reduces its wasted energies. The user may have an option partnering it to lifting pallet device enabling it to fixed the position of shrink which is located to inferior extremity of the unit itself.