+7 (812) 645-08-06
Welding consumables
select brand
Welding electrode - ABIARC
The ABIARC is a gouging electrode manufactured by Abicor Binzel. Its key features include a pure copper...
Welding electrode - ABIARC
The ABIARC is a gouging electrode manufactured by Abicor Binzel. Its key features include a pure copper coating that allows superior electric conductivity; an artificial graphite material that allows high density and high metal removal rate; a reduced electrode usage that allows minimal cost; a high metal removal rate that offers effective process; an ensured 100% productivity; and a very minimal burn back rate.
Welding electrode - ø 3 - 10 mm, 30 - 75 mm
The right electrode selection influences
quality of the weld joint and the
uniformity...
quality of the weld joint and the
uniformity...
Welding electrode - ø 3 - 10 mm, 30 - 75 mm
The right electrode selection influences
quality of the weld joint and the
uniformity in series production.
Electrode’s stability under heat is crucial
concerning the costs for series
production.
PECO offers the whole range of
electrodes depending on the welding
material:
quality of the weld joint and the
uniformity in series production.
Electrode’s stability under heat is crucial
concerning the costs for series
production.
PECO offers the whole range of
electrodes depending on the welding
material:
Welding electrode / molybdenum / tungsten - Unitip®, Unibond®
Unitips are electrodes for parallel gap bonding of gold plated kovar, copper, or gold
ribbons (wires) which are smaller than 0.010 inches (0.25 mm). They are made
from...
ribbons (wires) which are smaller than 0.010 inches (0.25 mm). They are made
from...
Welding electrode / molybdenum / tungsten - Unitip®, Unibond®
Unitips are electrodes for parallel gap bonding of gold plated kovar, copper, or gold
ribbons (wires) which are smaller than 0.010 inches (0.25 mm). They are made
from two pieces of molybdenum or tungsten, which are permanently bonded to
an insulating spacer. This fixed gap and bonded construction results in a tip which
wears uniformly when properly dressed. The length of the Unitip and the flat area
on the front allows it to bond ribbons extremely close to the walls of packages
as deep as 0.450 inches (11.5 mm). The narrower Thinline “L” series Unitips have
a tapered profile, enabling them to be used closer to the corners of packages
ribbons (wires) which are smaller than 0.010 inches (0.25 mm). They are made
from two pieces of molybdenum or tungsten, which are permanently bonded to
an insulating spacer. This fixed gap and bonded construction results in a tip which
wears uniformly when properly dressed. The length of the Unitip and the flat area
on the front allows it to bond ribbons extremely close to the walls of packages
as deep as 0.450 inches (11.5 mm). The narrower Thinline “L” series Unitips have
a tapered profile, enabling them to be used closer to the corners of packages
Solder wick - DB1003, DB2003
The DB1003, DB2003 Series of Solder Wick, manufactured by ELECTROLUBE, is specifically designed as...
Solder wick - DB1003, DB2003
The DB1003, DB2003 Series of Solder Wick, manufactured by ELECTROLUBE, is specifically designed as treated copper braid for de-soldering electronic joints and electrical connections applications. This device ensures quickness, safety, and efficiency during operation.
Moreover, this product is built with economic length of 3 m, and is available in two widths of 1.5 mm and 2.00 mm.
Moreover, this product is built with economic length of 3 m, and is available in two widths of 1.5 mm and 2.00 mm.