+7 (812) 645-08-06
Pipe benders, Tube benders
select brand
Manual bending machine - HMB-1125
The HMB-1125 from Baileigh Industrial is an exciting new manual mandrel bender that was designed to help produce tight bends in thin wall tubing without the space issues and expense...
Manual bending machine - HMB-1125
The HMB-1125 from Baileigh Industrial is an exciting new manual mandrel bender that was designed to help produce tight bends in thin wall tubing without the space issues and expense of a full blown automatic mandrel bender. This unique machine uses a one way bearing and gear reduction setup to help produce enough power to bend up to 1-1/8 OD mild steel. For accurate and consistent bends a digital readout is also standard to keep track of the bend degree.
Perfect for the furniture maker, this mandrel bender comes with a 48 mandrel rod and has the ability to bend to 180 degrees. This unique machine will have a place in just about any shop. For more information on the HMB-1125, call a representative today.
Perfect for the furniture maker, this mandrel bender comes with a 48 mandrel rod and has the ability to bend to 180 degrees. This unique machine will have a place in just about any shop. For more information on the HMB-1125, call a representative today.
Manual bending machine - 3/8 " | MPB-40
Perfect for the hobbiest or small shop the MPB-40 bench top bending system for Baileigh Industrial can bend, twist and roll wrought iron up to 1 1/4" X 1/4" rectangular...
Manual bending machine - 3/8 " | MPB-40
Perfect for the hobbiest or small shop the MPB-40 bench top bending system for Baileigh Industrial can bend, twist and roll wrought iron up to 1 1/4" X 1/4" rectangular and 3/8" square or round stock. This system is perfect for fabricating flat metal railing and other ornamental items.
The MPB-40 includes complete a complete set of jigs for bending wrought iron into just about any shape imaginable. The MPB-40 ornamental bender can bend curves, spirals, angles, and do twisting as well. The set also includes a station that has a manual shear for cutting your stock to the proper length and a metal punch for punching perfectly round hold every time.
The MPB-40 includes complete a complete set of jigs for bending wrought iron into just about any shape imaginable. The MPB-40 ornamental bender can bend curves, spirals, angles, and do twisting as well. The set also includes a station that has a manual shear for cutting your stock to the proper length and a metal punch for punching perfectly round hold every time.
Exhaust tube bending machine - EB-300
Have an automotive repair shop that is constantly outsourcing your exhaust jobs because you dont have the right tube bender for the job? If that is the case look, at the EB-300 exhaust bender from Baileigh Industrial. This just might be tool you need to add profitability...
Exhaust tube bending machine - EB-300
Have an automotive repair shop that is constantly outsourcing your exhaust jobs because you dont have the right tube bender for the job? If that is the case look, at the EB-300 exhaust bender from Baileigh Industrial. This just might be tool you need to add profitability back to your jobs. The EB-300 comes with everything you need to get started.
For bending, the EB-300 exhaust bender comes with standard radius tooling from 1-1/2" up to 3" OD (for 2-1/4 to 3 OD tubing 12 gauge mild steel wall thickness is required). The EB-300 is considered a compression bender as it uses one large hydraulic ram to push the inside radius die into the compression assisted outside counter dies. The outside dies have two hydraulic cylinders that applies pressure at the point of bend on the inside radius die. The end result is that the machine can bend light gauge tubing without folding the material in half. The EB-300 exhaust pipe bender requires 220 volts of single phase power is operated using knee controls, allowing hands to be kept free for material control.
For bending, the EB-300 exhaust bender comes with standard radius tooling from 1-1/2" up to 3" OD (for 2-1/4 to 3 OD tubing 12 gauge mild steel wall thickness is required). The EB-300 is considered a compression bender as it uses one large hydraulic ram to push the inside radius die into the compression assisted outside counter dies. The outside dies have two hydraulic cylinders that applies pressure at the point of bend on the inside radius die. The end result is that the machine can bend light gauge tubing without folding the material in half. The EB-300 exhaust pipe bender requires 220 volts of single phase power is operated using knee controls, allowing hands to be kept free for material control.
Manual bending machine - REMS Swing
Practical single-hand tool for exact tube bending up to 90°. Ideal for on-site work.
Soft copper pipes, also...
Soft copper pipes, also...
Manual bending machine - REMS Swing
Practical single-hand tool for exact tube bending up to 90°. Ideal for on-site work.
Soft copper pipes, also...
Soft copper pipes, also...
Portable electric bending machine - REMS Akku-Curvo
Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Cordless. Can be used anywhere, without vice. For workshop, job site, repair.
Hard,...
Hard,...
Portable electric bending machine - REMS Akku-Curvo
Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Cordless. Can be used anywhere, without vice. For workshop, job site, repair.
Hard,...
Hard,...
Portable electric bending machine - REMS Curvo
Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Can be used anywhere, without vice. For workshop, job site, repair.
Hard,...
Hard,...
Portable electric bending machine - REMS Curvo
Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Can be used anywhere, without vice. For workshop, job site, repair.
Hard,...
Hard,...
Portable electric bending machine - REMS Curvo 50
Universal, compact electric tool for cold bending of pipes and tubes up to 90°. Can be used anywhere, without...
Portable electric bending machine - REMS Curvo 50
Universal, compact electric tool for cold bending of pipes and tubes up to 90°. Can be used anywhere, without...
Manual bending machine - REMS Sinus
Universal, robust hand tool for cold bending of pipes and tubes up to 180°. Can be used anywhere. For workshop, job site, repair.
Hard, half-hard,...
Hard, half-hard,...
Manual bending machine - REMS Sinus
Universal, robust hand tool for cold bending of pipes and tubes up to 180°. Can be used anywhere. For workshop, job site, repair.
Hard, half-hard,...
Hard, half-hard,...
Manual bending machine - AG
The bending device AG is an accessory tot he sliding joint punch. Pre-shaped segments are inserted into the machine by hand and bent to shape.
Manual bending machine - 29 mm | EHS-P
The suspension fixing punch EHS-P consist of 2 manual devices that...
Manual bending machine - 29 mm | EHS-P
The suspension fixing punch EHS-P consist of 2 manual devices that are used to produce the suspension fixing clips (upper part oft he slide fixings) and match folded profile, optionally for 25, 32 or 38 mm profile heights, from sheet metal strips with a width of 29mm.
Manual bending machine - 39 mm | FHS, LHS, HS
This manually unit is used to produce static fixing...
Manual bending machine - 39 mm | FHS, LHS, HS
This manually unit is used to produce static fixing clips that match the folded profile in a single operation, optionally for 25,32 or 38mm profile heights, from sheet metal strips widths of 39mm.