+7 (812) 645-08-06
Stripping robots, scalers, other stripping equipment
select brand
Wet spray booth
Spray booth type RTS Rotation with dry separation
Standard advantages:
Automatically regenerating pre-filter
Automatically cleaned fine filter (option)
Almost unrestricted usability with physically drying paints
Long service lives
Fast amortisation...
Standard advantages:
Automatically regenerating pre-filter
Automatically cleaned fine filter (option)
Almost unrestricted usability with physically drying paints
Long service lives
Fast amortisation...
Wet spray booth
Spray booth type RTS Rotation with dry separation
Standard advantages:
Automatically regenerating pre-filter
Automatically cleaned fine filter (option)
Almost unrestricted usability with physically drying paints
Long service lives
Fast amortisation and simple handling
Low residual dust values
Only dry overspray as waste
RTS-Rotation low-maintenance dry spray booth
Overspray dry separation demonstrates its strengths in practice above all when relatively large quantities of paint have to be processed and the overspray portion cannot be reduced any further.
Spray booth with dry separation are usually equipped with disposable filters or manually regenerative filters. These cause costs for spare filters, maintenance and disposal. In addition to that, operation has to be interrupted in order to exchange the filters. The RTS rotation system was developed by Rippert in order to reduce these costs and tooling times. Maintenance intervals and filter service lives are prolonged significantly in comparison with conventional systems due to the new brush pre-filtration.
Standard advantages:
Automatically regenerating pre-filter
Automatically cleaned fine filter (option)
Almost unrestricted usability with physically drying paints
Long service lives
Fast amortisation and simple handling
Low residual dust values
Only dry overspray as waste
RTS-Rotation low-maintenance dry spray booth
Overspray dry separation demonstrates its strengths in practice above all when relatively large quantities of paint have to be processed and the overspray portion cannot be reduced any further.
Spray booth with dry separation are usually equipped with disposable filters or manually regenerative filters. These cause costs for spare filters, maintenance and disposal. In addition to that, operation has to be interrupted in order to exchange the filters. The RTS rotation system was developed by Rippert in order to reduce these costs and tooling times. Maintenance intervals and filter service lives are prolonged significantly in comparison with conventional systems due to the new brush pre-filtration.
Wet spray booth - RTS
Spray walls and spray booths with dry separation via pre-filters and fine filters.
Spray walls and spray booths with dry separation
For lower utilisation times or overspray quantities, spraying systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RTS...
Spray walls and spray booths with dry separation
For lower utilisation times or overspray quantities, spraying systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RTS...
Wet spray booth - RTS
Spray walls and spray booths with dry separation via pre-filters and fine filters.
Spray walls and spray booths with dry separation
For lower utilisation times or overspray quantities, spraying systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RTS enables individual adaptation to the respective case of need.
Function
The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan.
Versions
The entire spray wall and the drip tray are made of galvanised sheet steel. The basic version consists of a wall with a two-fold filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The first filter stage is formed by a paper filter or a baffle plate filter, consisting of two rows of galvanised sheet metal lamellae arranged one behind the other. A glass fibre fine filter arranged directly behind it represents the second filter stage. The spray wall can additionally be equipped with removable or fixed side and ceiling panels. Each version is also available with floor suction pan, available with an integrated 2-stage filter and grating cover.
Spray walls and spray booths with dry separation
For lower utilisation times or overspray quantities, spraying systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RTS enables individual adaptation to the respective case of need.
Function
The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan.
Versions
The entire spray wall and the drip tray are made of galvanised sheet steel. The basic version consists of a wall with a two-fold filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The first filter stage is formed by a paper filter or a baffle plate filter, consisting of two rows of galvanised sheet metal lamellae arranged one behind the other. A glass fibre fine filter arranged directly behind it represents the second filter stage. The spray wall can additionally be equipped with removable or fixed side and ceiling panels. Each version is also available with floor suction pan, available with an integrated 2-stage filter and grating cover.
Wet spray booth - RES
Spray booth type RES with dry separation
Spray walls and spray booths with dry separation via cartons. For lower utilisation times or overspray quantities
RES dry spray booth
For lower utilisation times or smaller overspray quantities, spray systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular...
Spray walls and spray booths with dry separation via cartons. For lower utilisation times or overspray quantities
RES dry spray booth
For lower utilisation times or smaller overspray quantities, spray systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular...
Wet spray booth - RES
Spray booth type RES with dry separation
Spray walls and spray booths with dry separation via cartons. For lower utilisation times or overspray quantities
RES dry spray booth
For lower utilisation times or smaller overspray quantities, spray systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RES enables individual adaptation to the respective case of need. The filter system of the RES dry spray wall consists of individual square cardboard boxes. A sheet metal frame serves as a support structure for the filter box. In order to save costs, there is a possibility to vary the individual filter boxes in the spray booth, without exchanging all of the filter elements.
Function
The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan.
Versions
The basic version consists of a wall with a two-fold filter stage. Paper filter boxes form the first filter stage. A glass fibre fine filter arranged directly behind it represents the second filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The spray booth can additionally be equipped with removable or fixed side and ceiling panels. The RES dry spray booth is available in galvanised sheet metal or in stainless steel.
Spray walls and spray booths with dry separation via cartons. For lower utilisation times or overspray quantities
RES dry spray booth
For lower utilisation times or smaller overspray quantities, spray systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RES enables individual adaptation to the respective case of need. The filter system of the RES dry spray wall consists of individual square cardboard boxes. A sheet metal frame serves as a support structure for the filter box. In order to save costs, there is a possibility to vary the individual filter boxes in the spray booth, without exchanging all of the filter elements.
Function
The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan.
Versions
The basic version consists of a wall with a two-fold filter stage. Paper filter boxes form the first filter stage. A glass fibre fine filter arranged directly behind it represents the second filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The spray booth can additionally be equipped with removable or fixed side and ceiling panels. The RES dry spray booth is available in galvanised sheet metal or in stainless steel.
Wet spray booth - RWS
Water-sprinkled spray booth type RWS
Water-sprinkled spray walls and spray booths with automatic paint sludge filtration system
In wet separation, the overspray meets the water film of the spray wall and is thereby bound in the water. The sludge formed by this is discharged using sludge filtration systems.
Water-sprinkled...
Water-sprinkled spray walls and spray booths with automatic paint sludge filtration system
In wet separation, the overspray meets the water film of the spray wall and is thereby bound in the water. The sludge formed by this is discharged using sludge filtration systems.
Water-sprinkled...
Wet spray booth - RWS
Water-sprinkled spray booth type RWS
Water-sprinkled spray walls and spray booths with automatic paint sludge filtration system
In wet separation, the overspray meets the water film of the spray wall and is thereby bound in the water. The sludge formed by this is discharged using sludge filtration systems.
Water-sprinkled spray walls
The overspray is sucked in in the lower area of the vertical water drain surface and is bound in water when it meets the film of water. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. In order to replace the water lost due to evaporation, it is recommended to fit an automatic water level controller.
The entire quantity of water is fed to the automatic paint sludge filtration system via the disposal pump. A coagulant is added to the water by an automatic dosing unit, as a result of which the paint sludge in the circulating water is disbonded and can be separated more easily. The cleaning of the circulating water takes place in the separately arranged paint sludge filtration system. Depending on the paint system and plant version, the separation system is operated using a full or partial current method.
Water-sprinkled spray walls and spray booths with automatic paint sludge filtration system
In wet separation, the overspray meets the water film of the spray wall and is thereby bound in the water. The sludge formed by this is discharged using sludge filtration systems.
Water-sprinkled spray walls
The overspray is sucked in in the lower area of the vertical water drain surface and is bound in water when it meets the film of water. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. In order to replace the water lost due to evaporation, it is recommended to fit an automatic water level controller.
The entire quantity of water is fed to the automatic paint sludge filtration system via the disposal pump. A coagulant is added to the water by an automatic dosing unit, as a result of which the paint sludge in the circulating water is disbonded and can be separated more easily. The cleaning of the circulating water takes place in the separately arranged paint sludge filtration system. Depending on the paint system and plant version, the separation system is operated using a full or partial current method.
Needle scaler pneumatic - max. 6.3 bar | NP series
Air requirements 220 l/min
Working pressure 6,3 bar
Stamping number 4500 min-1
Working pressure 6,3 bar
Stamping number 4500 min-1
Needle scaler pneumatic - RRC13
The RRC13 Pneumatic Scaler features a guaranteed percussive technology and a high quality reduction...
Needle scaler pneumatic - RRC13
The RRC13 Pneumatic Scaler features a guaranteed percussive technology and a high quality reduction rate. It is ideally used for discharging works in shipyards, foundries, constructions, and engineering industries. It has a ready to use mechanisms that include minimal operator load, vibration damping, delayed fatigue, and offers user protection from noise and vibration hazardous effects.