Robust and reliable with bearings used in all moving parts. Pressure between the rubber roller and the knife roller can be adjusted during operation allowing the use of lower grades of glass fibre. The chopper can easily be removed from its casing for cleaning and inspection.
Glassfibre chopper gun
For safety reasons the compressed air to the chopper is automatically switched off during disassembly. Chopped glass fibre is fed into an adjustable channel allowing the fibre to be directed into the material mix with a high degree of accuracy. Standard length of chopped fibres is 25 mm but other lengths are available upon request. The chopper has a very high capacity and can also be used for other types of fibres. Up to three strands can be used at the same time.
Special features
Catalyst slave pump for exact catalyst-resin ratio
Continually variable catalyst ratio
Recirculation of resin and catalyst
Even flow of catalysed material
Wheeled chassis for full mobility
User friendly
High output spray gun
Pneumatically operated trigger on gun
Fibres are impregnated with minimal air content
No solvent needed