+7 (812) 645-08-06
Bursting discs
select brand
Bursting disc - 414 MPa
The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels....
Bursting disc - 414 MPa
The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels.
Outlet connections are 3/8" pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 90 foot pounds, depending upon pressure and media being used.
Material of body and hold down nut is high tensile 316 stainless steel. Standard tubing glands and collars are provided unless otherwise specified.
Outlet connections are 3/8" pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 90 foot pounds, depending upon pressure and media being used.
Material of body and hold down nut is high tensile 316 stainless steel. Standard tubing glands and collars are provided unless otherwise specified.
Inverted bursting disc - 12 - 1 000 psi | URA series
Scoreless design offers higher cycle life when compared to...
Inverted bursting disc - 12 - 1 000 psi | URA series
Scoreless design offers higher cycle life when compared to scored reverse acting disks
Single disk design covers 95% of plant requirements
Excels in liquid, gas, or two-phase applications
ASME UD marking available
Single disk design covers 95% of plant requirements
Excels in liquid, gas, or two-phase applications
ASME UD marking available
Inverted bursting disc / ultra-low-pressure - 2 - 40 psi | RLP series
Unique scoreless dual domed design offers...
Inverted bursting disc / ultra-low-pressure - 2 - 40 psi | RLP series
Unique scoreless dual domed design offers ultra low burst ratings
Excels in liquid, gas, or two-phase applications
ASME UD marking available
Excels in liquid, gas, or two-phase applications
ASME UD marking available
Inverted bursting disc - 24 - 1 000 psi | SRA series
Disk is cross scored on the vent side to minimize...
Inverted bursting disc - 24 - 1 000 psi | SRA series
Disk is cross scored on the vent side to minimize the effect of product build-up on the process side
Suitable for gas service only
ASME UD marking available
Suitable for gas service only
ASME UD marking available
Inverted bursting disc - 10 - 1700 psi | SB series
Solid non-scored disk reverses into
knife blades mounted into outlet holder
Superior fatigue and cycle life when compared to scored reverse acting disks
knife blades mounted into outlet holder
Superior fatigue and cycle life when compared to scored reverse acting disks
