+7 (812) 645-08-06
Thermoplastic hoses
select brand
Thermoplastic hose / high-pressure - DN 0.25 - 8, 300 MPa | 2240D
Inner diameter : 0.25 mm - 4 mm
Working pressure : 275000000 Pa - 300000000 Pa
Working temperature : -10 °C - 70 °C
These thermoplastic hoses offer a high pressure service to clean tubes in applications...
Working pressure : 275000000 Pa - 300000000 Pa
Working temperature : -10 °C - 70 °C
These thermoplastic hoses offer a high pressure service to clean tubes in applications...
Thermoplastic hose / high-pressure - DN 0.25 - 8, 300 MPa | 2240D
These thermoplastic hoses offer a high pressure service to clean tubes in applications such as heat exchangers used in the oil refining and chemical industries. The thermoplastic hoses act as a flexible lance during use, operating at working pressures of 75MPa and above. DN -3, DN -4 and -0.25 minimum inside diameters are available.
Thermoplastic hose - DN 0.25 - 4 | 2243D
Inner diameter : 0.25 mm - 4 mm
Designed by Parker, these thermoplastic hoses are offer ultra-high pressure services which...
Designed by Parker, these thermoplastic hoses are offer ultra-high pressure services which...
Thermoplastic hose - DN 0.25 - 4 | 2243D
Designed by Parker, these thermoplastic hoses are offer ultra-high pressure services which are ideally suited for removing rust, dirt and paint for the surface preparation of tanks, ship decks, asphalt and concrete. These hoses are utilized in applications relating to ship maintenance, construction and general water blast cleaning applications.
Thermoplastic hose / high-pressure - DN 0.25 - 32, 300 MPa | 2244N
Inner diameter : 0.25 mm - 32 mm
Working pressure : 220000000 Pa - 300000000 Pa
Working temperature : -40 °C - 100 °C
2244N Hose can expertly handle intense pressures that are felt...
Working pressure : 220000000 Pa - 300000000 Pa
Working temperature : -40 °C - 100 °C
2244N Hose can expertly handle intense pressures that are felt...
Thermoplastic hose / high-pressure - DN 0.25 - 32, 300 MPa | 2244N
2244N Hose can expertly handle intense pressures that are felt in industries like construction, water blasting and ship maintaining applications. They are best suited for removal of rust, dirt, and paint particles from surfaces.
Thermoplastic hose / high-pressure - DN 6, 250 MPa | 2245D
Inner diameter : 6 mm
Working pressure : 250000000 Pa
Working temperature : -10 °C - 70 °C
The hose are designed to offer high pressure service for construction,...
Working pressure : 250000000 Pa
Working temperature : -10 °C - 70 °C
The hose are designed to offer high pressure service for construction,...
Thermoplastic hose / high-pressure - DN 6, 250 MPa | 2245D
The hose are designed to offer high pressure service for construction, ship maintenance and general water blast cleaning. The valves offer perfect solution for dirt, rust and paint paint removal for surface preparation of ship decks, tanks, concrete and asphalt.
Thermoplastic hose / high-pressure - DN 0.25 - 20, 276 MPa | 2380N
Inner diameter : 0.25 mm - 20 mm
Outer diameter : 13.4 mm - 22.85 mm
Working pressure : 276000000 Pa
This ultra high pressure hose is employed in common cleansing methods,...
Outer diameter : 13.4 mm - 22.85 mm
Working pressure : 276000000 Pa
This ultra high pressure hose is employed in common cleansing methods,...
Thermoplastic hose / high-pressure - DN 0.25 - 20, 276 MPa | 2380N
This ultra high pressure hose is employed in common cleansing methods, upkeep of ships and building construction. This service is appropriate for preparing and cleansing the decks of ships, tanks, concrete mixers and asphalt by removing dirt, rust and paint.
Polyethylene hose - 1/4" - 3/8'' | PA series
Outer diameter : 2 mm - 16 mm
Working temperature : -80 °F - 221 °F
The PA, Plastic Tube Armored, multiple plastic...
Working temperature : -80 °F - 221 °F
The PA, Plastic Tube Armored, multiple plastic...
Polyethylene hose - 1/4" - 3/8'' | PA series
The PA, Plastic Tube Armored, multiple plastic tube bundles
features polyethylene tubes with dimensions
1/4” OD x .040” Wall and 3/8” OD x .062” Wall.
features polyethylene tubes with dimensions
1/4” OD x .040” Wall and 3/8” OD x .062” Wall.
Thermoplastic hose - 0.625", max. 10 000 psi | M810
Inner diameter : min 0.625 in
Working pressure : 276 bar
The M810 is a thermoplastic hose for low to medium pressureand is made of MSHA approved synthetic rubber. The minimum inside diameter...
Working pressure : 276 bar
The M810 is a thermoplastic hose for low to medium pressureand is made of MSHA approved synthetic rubber. The minimum inside diameter...
Thermoplastic hose - 0.625", max. 10 000 psi | M810
The M810 is a thermoplastic hose for low to medium pressureand is made of MSHA approved synthetic rubber. The minimum inside diameter is 0.625" and the maximum outside diameter is 1.050".
Has a minimum burst working pressure x 4 = min. burst, with a maximum allowable working pressure 4:1 4000 wpsi, 2.5:1.
Utilizes the 43 series style fittings.
The hose is very lightweight and offers flexible long lengths, M8-E-Z FLEX Parflexhoses are comparably equal to sae 100r12 hoses.
Has a minimum burst working pressure x 4 = min. burst, with a maximum allowable working pressure 4:1 4000 wpsi, 2.5:1.
Utilizes the 43 series style fittings.
The hose is very lightweight and offers flexible long lengths, M8-E-Z FLEX Parflexhoses are comparably equal to sae 100r12 hoses.
Thermoplastic hose / high-pressure - 20 000 - 29 999 psi | 2440N
Inner diameter : min 0.75 in
Outer diameter : max 1.3 in
Outer diameter : max 1.3 in
Thermoplastic hose / high-pressure - 20 000 - 29 999 psi | 2440N
Inner diameter : min 0.75 in
Outer diameter : max 1.3 in
Outer diameter : max 1.3 in
PFA tube
Parker Legris launches its new comprehensive range of clear and flexible metric tubing range made of high-purity grade PFA. This tubing range is a competitive and versatile...
PFA tube
Parker Legris launches its new comprehensive range of clear and flexible metric tubing range made of high-purity grade PFA. This tubing range is a competitive and versatile solution designed for technological success featuring crystal-coloured and anti-static grades. This is a primary alternative to stainless steel tubing as it is lightweight and ensures perfect chemical inertia and excellent mechanical function that allows potential problem-solving like no other material. It can cover a broad coverage of very demanding functions such as in laboratories, the food industry, as well as in medical environments. FDA certified and can withstand a broad range of working temperatures.
Fluoropolymer hose - FEP
For any type of equipment be it in air or water management, the passageways or tubes...
Fluoropolymer hose - FEP
For any type of equipment be it in air or water management, the passageways or tubes...
PVC hose / with webbing reinforcement
This is a braided PVC hose made by Legris. The hose is a translucent, food...
PVC hose / with webbing reinforcement
This is a braided PVC hose made by Legris. The hose is a translucent, food quality device and its main distinguishing feature is that it has translucent properties, which can help users see the fluid flow that is running through the hose. This is undoubtedly helpful to those who need such a feature.
Pneumatic hose / self-fastening
This remarkable self-fastening hose created by Legris is specially designed with NBR...
Pneumatic hose / self-fastening
This remarkable self-fastening hose created by Legris is specially designed with NBR nitrile rubber supplemented with a textile braid within its inner and outer layers. It is ideally suited for automobile process equipment like the model CNOMO E07.2115N specifically for keeping the circuits cool and for any other pneumatic applications.