+7 (812) 645-08-06
Stainless steel hoses
select brand
Stainless steel hose - 6 - 18"
The unique Nex Flow™ Rigid Flex Hose features a stainless steel construction preventing any breakage even after few bends unlike the rubber hoses with simple copper inserts. The flex...
Stainless steel hose - 6 - 18"
The unique Nex Flow™ Rigid Flex Hose features a stainless steel construction preventing any breakage even after few bends unlike the rubber hoses with simple copper inserts. The flex hose is resistant to creep and crimping and is used to flex, direct and then hold in place air nozzles, air jets and other small blow off products. The hose can also be used for liquid spray jets. The stainless steel construction of the hose supports operation in any difficult environment. It is available in three different sizes of 6", 12" and 18" and in two configurations of 1/4" male NPT welded end connection both ends or 1/4 male NPT welded connection one end and female NPT welded connection other end.
Suction hose / polyurethane / stainless steel / flexible - PROTAPE® PUR-INOX 330 MHF
Inner diameter : 38 mm - 508 mm
Outer diameter : 45 mm - 516 mm
Working pressure : 0.05 bar - 1.06 bar
super-light and reinforced model
highly flexible + compressible 3:1
abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVCs)
optimized flow properties
high tensile strength and tear resistant
...
Outer diameter : 45 mm - 516 mm
Working pressure : 0.05 bar - 1.06 bar
super-light and reinforced model
highly flexible + compressible 3:1
abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVCs)
optimized flow properties
high tensile strength and tear resistant
...
Suction hose / polyurethane / stainless steel / flexible - PROTAPE® PUR-INOX 330 MHF
super-light and reinforced model
highly flexible + compressible 3:1
abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVCs)
optimized flow properties
high tensile strength and tear resistant
polyurethane complies with: FDA 21 CFR 177.2600 and 178.2010, EC guideline 2002/72/EC incl. the amendment 2008/39/EC and 975/2009, German guideline XXXIX BfR polyurethane
approved by an independent testing laboratory for the complete hose, acc. to EU Directive 2002/72/EC, incl. amending Directive 975/2009 and Regulation No. 10/2011
odourless and tasteless
microbe and hydrolysis resistant
good resistance to chemicals
good resistance to UV and ozone
very good low temperature flexibility (better than comparable ester-polyurethanes)
small bending radiuses
kink-proof
free of softener and halogen
gas and liquid tight
conform to RoHS guideline
according to German TRBS 2153 (formerly BGR 132): capable of electro-static discharge by grounding the spiral, recommended for many applications with the exception of inflammable bulk materials
highly flexible + compressible 3:1
abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVCs)
optimized flow properties
high tensile strength and tear resistant
polyurethane complies with: FDA 21 CFR 177.2600 and 178.2010, EC guideline 2002/72/EC incl. the amendment 2008/39/EC and 975/2009, German guideline XXXIX BfR polyurethane
approved by an independent testing laboratory for the complete hose, acc. to EU Directive 2002/72/EC, incl. amending Directive 975/2009 and Regulation No. 10/2011
odourless and tasteless
microbe and hydrolysis resistant
good resistance to chemicals
good resistance to UV and ozone
very good low temperature flexibility (better than comparable ester-polyurethanes)
small bending radiuses
kink-proof
free of softener and halogen
gas and liquid tight
conform to RoHS guideline
according to German TRBS 2153 (formerly BGR 132): capable of electro-static discharge by grounding the spiral, recommended for many applications with the exception of inflammable bulk materials
Suction hose / transport / stainless steel / polyurethane - AIRDUC® PUR-INOX 351 MHF
Inner diameter : 25 mm - 305 mm
Outer diameter : 32 mm - 314 mm
Working pressure : 0.16 bar - 2.69 bar
medium-heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible
high...
Outer diameter : 32 mm - 314 mm
Working pressure : 0.16 bar - 2.69 bar
medium-heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible
high...
Suction hose / transport / stainless steel / polyurethane - AIRDUC® PUR-INOX 351 MHF
Inner diameter : 25 mm - 305 mm
Outer diameter : 32 mm - 314 mm
Working pressure : 0.16 bar - 2.69 bar
medium-heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible
high...
Outer diameter : 32 mm - 314 mm
Working pressure : 0.16 bar - 2.69 bar
medium-heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible
high...
Transport hose / suction / stainless steel / polyurethane - AIRDUC® PUR-INOX 351 MHF-AS
Inner diameter : 32 mm - 508 mm
Outer diameter : 40 mm - 517 mm
Working pressure : 0.02 bar - 2.12 bar
according to TRBS 2153: permanently conductive wall due to non-migrating permanent antistatic agent: Electrical and surface resistance <10⁹ Ω, recommended for transporting inflammable bulk materials
light model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most...
Outer diameter : 40 mm - 517 mm
Working pressure : 0.02 bar - 2.12 bar
according to TRBS 2153: permanently conductive wall due to non-migrating permanent antistatic agent: Electrical and surface resistance <10⁹ Ω, recommended for transporting inflammable bulk materials
light model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most...
Transport hose / suction / stainless steel / polyurethane - AIRDUC® PUR-INOX 351 MHF-AS
Inner diameter : 32 mm - 508 mm
Outer diameter : 40 mm - 517 mm
Working pressure : 0.02 bar - 2.12 bar
according to TRBS 2153: permanently conductive wall due to non-migrating permanent antistatic agent: Electrical and surface resistance <10⁹ Ω, recommended for transporting inflammable bulk materials
light model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most...
Outer diameter : 40 mm - 517 mm
Working pressure : 0.02 bar - 2.12 bar
according to TRBS 2153: permanently conductive wall due to non-migrating permanent antistatic agent: Electrical and surface resistance <10⁹ Ω, recommended for transporting inflammable bulk materials
light model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most...
Suction hose / transport / polyurethane / stainless steel - AIRDUC® PUR-INOX 355 MHF
Inner diameter : 25 mm - 508 mm
Outer diameter : 32 mm - 522 mm
Working pressure : 0.24 bar - 3.47 bar
heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible with low weight
increased pressure and vacuum...
Outer diameter : 32 mm - 522 mm
Working pressure : 0.24 bar - 3.47 bar
heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible with low weight
increased pressure and vacuum...
Suction hose / transport / polyurethane / stainless steel - AIRDUC® PUR-INOX 355 MHF
Inner diameter : 25 mm - 508 mm
Outer diameter : 32 mm - 522 mm
Working pressure : 0.24 bar - 3.47 bar
heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible with low weight
increased pressure and vacuum...
Outer diameter : 32 mm - 522 mm
Working pressure : 0.24 bar - 3.47 bar
heavy model
highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC´s)
smooth interior
optimized flow properties
flexible with low weight
increased pressure and vacuum...
Suction hose / transport / polyurethane / stainless steel - AIRDUC® PUR-INOX 355 MHF-AS
Inner diameter : 44 mm - 508 mm
Outer diameter : 55 mm - 552 mm
Working pressure : 0 bar - 2.62 bar
according to TRBS 2153: permanently conductive wall due to non-migrating permanent antistatic agent: Electrical and surface resistance <10⁹ Ω, recommended for transporting inflammable bulk materials
heavy model
smooth interior
optimized flow properties
flexible with low weight
increased...
Outer diameter : 55 mm - 552 mm
Working pressure : 0 bar - 2.62 bar
according to TRBS 2153: permanently conductive wall due to non-migrating permanent antistatic agent: Electrical and surface resistance <10⁹ Ω, recommended for transporting inflammable bulk materials
heavy model
smooth interior
optimized flow properties
flexible with low weight
increased...
Suction hose / transport / polyurethane / stainless steel - AIRDUC® PUR-INOX 355 MHF-AS
according to TRBS 2153: permanently conductive wall due to non-migrating permanent antistatic agent: Electrical and surface resistance <10⁹ Ω, recommended for transporting inflammable bulk materials
heavy model
smooth interior
optimized flow properties
flexible with low weight
increased pressure and vacuum resistance
high tensile strength and tear resistant
polyurethane complies with: FDA 21 CFR 177.2600 and 178.2010, EC guideline 2002/72/EC incl. the amendment 2008/39/EC and 975/2009, German guideline XXXIX BfR polyurethane
approved by an independent testing laboratory for the complete hose acc. to EU Directive 2002/72/EC, incl. amending Directive 2007/19/EC
Approved without additive* by an independent testing laboratory for the complete hose according EU Directive 2002/72/EU incl. amending Directives 975/2009 and Regulation Nr. 10/2011
* Food grade additives complies with: EU Directive 2002/72/EU incl. 2007/72/EU
odourless and tasteless
microbe and hydrolysis resistant
good resistance to oil, gasoline and chemicals
good resistance to UV and ozone
very good low temperature flexibility (better than comparable ester-polyurethanes)
heavy model
smooth interior
optimized flow properties
flexible with low weight
increased pressure and vacuum resistance
high tensile strength and tear resistant
polyurethane complies with: FDA 21 CFR 177.2600 and 178.2010, EC guideline 2002/72/EC incl. the amendment 2008/39/EC and 975/2009, German guideline XXXIX BfR polyurethane
approved by an independent testing laboratory for the complete hose acc. to EU Directive 2002/72/EC, incl. amending Directive 2007/19/EC
Approved without additive* by an independent testing laboratory for the complete hose according EU Directive 2002/72/EU incl. amending Directives 975/2009 and Regulation Nr. 10/2011
* Food grade additives complies with: EU Directive 2002/72/EU incl. 2007/72/EU
odourless and tasteless
microbe and hydrolysis resistant
good resistance to oil, gasoline and chemicals
good resistance to UV and ozone
very good low temperature flexibility (better than comparable ester-polyurethanes)
Stainless steel hose / steel-braided - HOS-EW
Outer diameter : 10 mm - 100 mm
Working temperature : 20 °C - 600 °C
Material: 1.4404 AISI 316L with stainless steel braiding 1.4301 AISI 304. The PTFE hoses can also be delivered completely assembled with various different end fittings. Temperature 20 ° C, temperature factor 1.00, temperature...
Working temperature : 20 °C - 600 °C
Material: 1.4404 AISI 316L with stainless steel braiding 1.4301 AISI 304. The PTFE hoses can also be delivered completely assembled with various different end fittings. Temperature 20 ° C, temperature factor 1.00, temperature...
Stainless steel hose / steel-braided - HOS-EW
Outer diameter : 10 mm - 100 mm
Working temperature : 20 °C - 600 °C
Material: 1.4404 AISI 316L with stainless steel braiding 1.4301 AISI 304. The PTFE hoses can also be delivered completely assembled with various different end fittings. Temperature 20 ° C, temperature factor 1.00, temperature...
Working temperature : 20 °C - 600 °C
Material: 1.4404 AISI 316L with stainless steel braiding 1.4301 AISI 304. The PTFE hoses can also be delivered completely assembled with various different end fittings. Temperature 20 ° C, temperature factor 1.00, temperature...