+7 (812) 645-08-06
Single-acting pneumatic cylinders
select brand
Pneumatic cylinder / single-action / for steel or aluminum profile - 250 psi, 9/16" - 4" | LP, LPM series
This device features a low profile made of repairable anodized aluminum. It also features a tie rod design.
The following bore sizes are available for customers: 9/16, 3/4,...
The following bore sizes are available for customers: 9/16, 3/4,...
Pneumatic cylinder / single-action / for steel or aluminum profile - 250 psi, 9/16" - 4" | LP, LPM series
This device features a low profile made of repairable anodized aluminum. It also features a tie rod design.
The following bore sizes are available for customers: 9/16, 3/4, 1-1/8, 1-1/2, 2, 2-1/2, 3, and 4, and the strokes measure up to 6, depending on bore sizes. Double- and single-acting versions are available too.
The piston rod's diameter is 1, the operating medium is pneumatic at around 250-PS, and filtered air is the standard fluid used. There are two standard piston ends but specialized models can be ordered, and six mounting styles are available. The device has a standard operating temperature between -10F and 165F. The optional high temperature models can range between -10F and 250F.
The following bore sizes are available for customers: 9/16, 3/4, 1-1/8, 1-1/2, 2, 2-1/2, 3, and 4, and the strokes measure up to 6, depending on bore sizes. Double- and single-acting versions are available too.
The piston rod's diameter is 1, the operating medium is pneumatic at around 250-PS, and filtered air is the standard fluid used. There are two standard piston ends but specialized models can be ordered, and six mounting styles are available. The device has a standard operating temperature between -10F and 165F. The optional high temperature models can range between -10F and 250F.
Pneumatic cylinder / single-action / short-travel - 8 - 63 mm, 145 psi | C05 series
These compact air cylinders with short stroke action can be purchased in two versions, single or double-acting. The range of bore sizes from 8-63 mm...
Pneumatic cylinder / single-action / short-travel - 8 - 63 mm, 145 psi | C05 series
These compact air cylinders with short stroke action can be purchased in two versions, single or double-acting. The range of bore sizes from 8-63 mm can provide massive thrust of up to 3000 N. It is your best choice any time you need an external cylinder to be clamped and locked. It has been provided with holes through the cylinder body to make it easier to install in cramped spaces. The one-piece body design makes it easy to clean, while the stainless steel rods of the piston set the standard for non-corrosion. Being pre-lubricated, they make work easier and reduce costs.
Pneumatic cylinder / single-action / cartridge type - 6 - 16 mm, 102 psi | P1G series
The P1G series have single-action, lubricant-free pneumatic cylinders mounted...
Pneumatic cylinder / single-action / cartridge type - 6 - 16 mm, 102 psi | P1G series
The P1G series have single-action, lubricant-free pneumatic cylinders mounted like cartridges to save space and add versatility. The use of a stainless steel rod and nickel plating for the threaded brass body adds anti-corrosion. With bores of 6, 10 and 16 mm, you get stroke lengths of 5, 10 and 15 mm.
Pneumatic cylinder / single-action / micro - 3 - 7 bar | 1213 series
These microcylinders are unique because they are not like the standard one....
Pneumatic cylinder / single-action / micro - 3 - 7 bar | 1213 series
These microcylinders are unique because they are not like the standard one. These are considered state-of-the-art when it comes to durability. Its body is made with nickel-plated brass and the rod/piston and spring are made of stainless steel. The rod busing is made of bass and the seal is NBR.
Pneumatic cylinder / single-action / micro - max. 10 bar | 126x series
These microcylinders are compliant with the ISP 6432 standards. Due to their reduced...
Pneumatic cylinder / single-action / micro - max. 10 bar | 126x series
These microcylinders are compliant with the ISP 6432 standards. Due to their reduced dimensions, microcylinders are typically the most widespread linear actuators which are in use. They can be utilized in a whole host of sectors, including woodworking machines, the ceramic sector, packaging and textiles, to name just a few.
Pneumatic cylinder / single-action / compact - max. 10 bar | 1560-80 series
One of a kind cylinder that features clear anodized extruded body with integral...
Pneumatic cylinder / single-action / compact - max. 10 bar | 1560-80 series
One of a kind cylinder that features clear anodized extruded body with integral slots for flush mounting of switches. A compact design for applications where cylinder length is outstanding and is available in two versions in dissimilar threaded fixing holes. It provides the best actuator life expectancy in its class.
Pneumatic cylinder / single-action / round - ø 8 - 25 mm, 10 - 150 mm | C(D)85-S/T series
The C85 series has been designed to fully conform to both ISO 6432 and CETOP RP52P standards. The C85 has a range of bore sizes ranging from 8mm to...
Pneumatic cylinder / single-action / round - ø 8 - 25 mm, 10 - 150 mm | C(D)85-S/T series
The C85 series has been designed to fully conform to both ISO 6432 and CETOP RP52P standards. The C85 has a range of bore sizes ranging from 8mm to 25mm with standard strokes ranging from 10mm right up to 300mm. The unit has been designed with a unique rod packing system that works to prevent the entry of dust. With it's extremely effective seal, the C85 is perfect for use in even the most dusty of environments. The C85 is housed in a scratch resistant casing and comes with fully replaceable nose seals, the C85 offers an exceptional service life with superior service throughout.