Fall arrest equipment: Anchorages, Pulleys, Rope clamps

select brand


ZARGES

Sliding fall arrester

A safety-slide mechanism with lanyard that is...

Sliding fall arrester

A safety-slide mechanism with lanyard that is shock absorbing. It is safety tested to DIN EN 353-1. Its shape is round and it is smooth running and comes with karabiner and shackle.
Codipro

Fall arrest anchorage eyebolt - M12, M16 , M20 | PE.SEB series

The CODIPRO's PE.SEB series harnesses/personnel fall protection rings are used mainly for offshore industries, or for wind tower...

Fall arrest anchorage eyebolt - M12, M16 , M20 | PE.SEB series

The CODIPRO's PE.SEB series harnesses/personnel fall protection rings are used mainly for offshore industries, or for wind tower construction. They are delivered with user manual. They are yellow, EN 795:1996 conformant, with marking regarding number of persons per ring, and feature a class of steel over 8. They are protected from corrosion. Can be ordered with different types of bolts, if requested. They are mostly used for one or two persons, however, models with greater loads are available.
TRACTEL

Life line anchorage

The TRACTEL's Travflex™ series life line anchorages feature a stainless steel turning point,...

Life line anchorage

The TRACTEL's Travflex™ series life line anchorages feature a stainless steel turning point, one stanchion plate, two intermediary anchors, two M16 bolts, one articulated anchoring support on a sole plate, twelve screws for securing the sole plate, one seal, two springs (exterior and interior), one locknut and one shock absorber. They are highly durable and reliable for continuous use.

Load fall arrester - max. 250 kg | BLOCMAT™ BS

Blocmat™ devices are cable load fall arresters. In the event of a failure of the primary load carrying...

Load fall arrester - max. 250 kg | BLOCMAT™ BS

Blocmat™ devices are cable load fall arresters. In the event of a failure of the primary load carrying system this device will stop the fall of the load in a short distance.


Device Blocmat™ BS load capacity 250kg :

- Limited fall height
- Smooth stopping of the load
- Low weight
- Quick installation
- Cable length 10 or 15 m
- Installation via flange or hole

Mobile fall arrest - 500 - 3 200 kg | Blocstop™ BSA/BSO

Blocstop™ fall arrest device

For man riding applications a protective secondary safety device is mandatory. For this use Tractel offers the BSO and BSA Blocstop™ products. In response to the most strict safety regulations, they can easily be attached to most fittings. The «Tirfor®» jaw-type unit fitted inside the Blocstop™...

Mobile fall arrest - 500 - 3 200 kg | Blocstop™ BSA/BSO

Blocstop™ fall arrest device

For man riding applications a protective secondary safety device is mandatory. For this use Tractel offers the BSO and BSA Blocstop™ products. In response to the most strict safety regulations, they can easily be attached to most fittings. The «Tirfor®» jaw-type unit fitted inside the Blocstop™...

Load fall arrester - 500 - 1 000 kg | BLOCMAT™ S-SI

Blocmat™ devices are cable load fall arresters. In the event of a failure of the primary load carrying system this device will stop the fall of the load...

Load fall arrester - 500 - 1 000 kg | BLOCMAT™ S-SI

Blocmat™ devices are cable load fall arresters. In the event of a failure of the primary load carrying system this device will stop the fall of the load in a short distance.


Device Blocmat™ S - SI load capacity 500kg to 1000 kg :

- Product line S soffit mounted model
- Product line SI wall mounted model
- Cable length 8 or 25 m
- Ready for re-use immediately after stopping a fall
- Fall arrest can be tested at any time
- Quickly stops a falling load (length of less than 100 mm)
- Factory reconditioning after stopping a load not required

Sliding fall arrester - STOPFOR™ AP

Stopfor™ AP fall arresting device is engineered to safeguard users from the risk of falling when working at heights. The device is designed...

Sliding fall arrester - STOPFOR™ AP

Stopfor™ AP fall arresting device is engineered to safeguard users from the risk of falling when working at heights. The device is designed for use in conjunction with a spliced strand rope, which is 14 mm thick. It works with the aid of panic jaw triggering technology.

The fall protection device is fully automated and encompasses a locking systel which provides efficacious support for risk-free working. It is provided with a webbing lanyard, 30 cm in length. The device is available in versions with M10, M11 and M41 connectors.
{{item.name}}