+7 (812) 645-08-06
Extractors: oil mist, sawdust
select brand
Oil mist collector / machine-mount - 0.75 kW | FLX 600, 1100
FLX mechanical oil mist filter is designed to eliminate coolant or oil mist from lathing, milling, drilling, sawing, watercutting, etc.
With HEPA filter an over 99,99 % filtration efficiency is achieved.
Direct Mounting...
With HEPA filter an over 99,99 % filtration efficiency is achieved.
Direct Mounting...
Oil mist collector / machine-mount - 0.75 kW | FLX 600, 1100
FLX mechanical oil mist filter is designed to eliminate coolant or oil mist from lathing, milling, drilling, sawing, watercutting, etc.
With HEPA filter an over 99,99 % filtration efficiency is achieved.
Direct Mounting to the Machine
The FLX filter is designed to be mounted directly to the machine. When you switch the machine on the filter fan will also start. No costly duct work or complicated electric installation. Simple and efficient!
Seven Step Filtration
Coolant or Oil mist is efficiently filtrated in 7 steps:
1. Inlet chamber with pre-separator.
2. Aluminum mesh filter.
3. EU-5 glasfibre fleece.
4. Hydrofilter (impinger).
5. EU-5 glasfibre fleece.
6. Aluminum mesh filter.
7. HEPA filter.
Filter 1,2,4 and 6 are washable. Filter 3 and 5 are to be changed when the airflow is too low.
The accumulated liquid is drained back to the machine through two return-pipes in the bottom of the FLX filter.
With HEPA filter an over 99,99 % filtration efficiency is achieved.
Direct Mounting to the Machine
The FLX filter is designed to be mounted directly to the machine. When you switch the machine on the filter fan will also start. No costly duct work or complicated electric installation. Simple and efficient!
Seven Step Filtration
Coolant or Oil mist is efficiently filtrated in 7 steps:
1. Inlet chamber with pre-separator.
2. Aluminum mesh filter.
3. EU-5 glasfibre fleece.
4. Hydrofilter (impinger).
5. EU-5 glasfibre fleece.
6. Aluminum mesh filter.
7. HEPA filter.
Filter 1,2,4 and 6 are washable. Filter 3 and 5 are to be changed when the airflow is too low.
The accumulated liquid is drained back to the machine through two return-pipes in the bottom of the FLX filter.
Oil mist collector / filtration media - ø 160 mm, 1.1 kW | NX-1000 series
Coolant or Oil Mist
NX mechanical oil mist filter is designed to eliminate coolant or oil mist from lathing, milling, drilling, sawing, water cutting etc.
Filter Cassettes
NX-1000 oil mist filters...
NX mechanical oil mist filter is designed to eliminate coolant or oil mist from lathing, milling, drilling, sawing, water cutting etc.
Filter Cassettes
NX-1000 oil mist filters...
Oil mist collector / filtration media - ø 160 mm, 1.1 kW | NX-1000 series
Coolant or Oil Mist
NX mechanical oil mist filter is designed to eliminate coolant or oil mist from lathing, milling, drilling, sawing, water cutting etc.
Filter Cassettes
NX-1000 oil mist filters are equipped with a self-draining filter cassette of nailed glass fibre and a HEPA filter. Each filter has a separate pressure gauge (manometer). Over 99,99% filter efficiency is achieved. The cleaned air can be re-circulated into the premises. Keeps heating costs down.
Application
NX-1000 is for 1-2 machines.
Complete Unit
NX-1000 is a complete unit of powdercoated steel sheet with filter cassette, HEPA filter and fan. Inlet from left or right with inlet flange with inside measure D.160 mm and cover for the not used inlet. Oil return pipe with 1 inch outside thread.
Accessories
As accessory you can get 0.5 m Extension Legs.
NX mechanical oil mist filter is designed to eliminate coolant or oil mist from lathing, milling, drilling, sawing, water cutting etc.
Filter Cassettes
NX-1000 oil mist filters are equipped with a self-draining filter cassette of nailed glass fibre and a HEPA filter. Each filter has a separate pressure gauge (manometer). Over 99,99% filter efficiency is achieved. The cleaned air can be re-circulated into the premises. Keeps heating costs down.
Application
NX-1000 is for 1-2 machines.
Complete Unit
NX-1000 is a complete unit of powdercoated steel sheet with filter cassette, HEPA filter and fan. Inlet from left or right with inlet flange with inside measure D.160 mm and cover for the not used inlet. Oil return pipe with 1 inch outside thread.
Accessories
As accessory you can get 0.5 m Extension Legs.
Recovery system solvent
Spooner has now added solvent recovery systems to its growing environmental product range by forming a partnership with AMCEC, solvent recovery specialists.
With offices...
With offices...
Recovery system solvent
Spooner has now added solvent recovery systems to its growing environmental product range by forming a partnership with AMCEC, solvent recovery specialists.
With offices around the world, thousands of systems in operation, more than 80 years experience and billions of pounds of solvent recovered each year, AMCEC has a strong global reputation for its quality equipment and is a recognized leader in the field of solvent recovery.
The solvent recovery systems now on offer from Spooner provide up to 99% recovery and in some cases a one-year return on investment. Steam or inert gas regenerated systems are custom built in various sizes and metallurgy to suit customer requirements and applications.
With offices around the world, thousands of systems in operation, more than 80 years experience and billions of pounds of solvent recovered each year, AMCEC has a strong global reputation for its quality equipment and is a recognized leader in the field of solvent recovery.
The solvent recovery systems now on offer from Spooner provide up to 99% recovery and in some cases a one-year return on investment. Steam or inert gas regenerated systems are custom built in various sizes and metallurgy to suit customer requirements and applications.
Wood dust extractor - ATEX
The ATEX model is designed with cartridge, and bagging filters with polypropylene bags. The unit is integrated with automatic cleaning filter. This components has closed-circuit storage, for the waste in the collectors.