+7 (812) 645-08-06
Power contactors
select brand
Power contactor / high-voltage - CH1130/02 Series
Schaltbau has introduced an update of its CH Series high-voltage contactors which have proven their worth in industrial and railway applications for decades. Its completely modernized design is comparable...
Power contactor / high-voltage - CH1130/02 Series
Schaltbau has introduced an update of its CH Series high-voltage contactors which have proven their worth in industrial and railway applications for decades. Its completely modernized design is comparable to the one of the most successful CT series. The new CH1130/02 also uses permanent magnets and ceramic elements for quenching the electric arc, thus ensuring optimal functionality and reliability of the contactor.
The customer is now offered a new version for 3 kV DC and AC with a current-carrying capacity of up to 200 A! which will replace the 4 existing CH series. The switching device is especially suited for use as pre-charging and switch-on contactor in power supplies and as control contactor for resistor banks in heating and air conditioning equipment.
The customer is now offered a new version for 3 kV DC and AC with a current-carrying capacity of up to 200 A! which will replace the 4 existing CH series. The switching device is especially suited for use as pre-charging and switch-on contactor in power supplies and as control contactor for resistor banks in heating and air conditioning equipment.
AC contactor / DC / power - CT1×15/08
Owing to a new blowout technology, CT Series contactors can be used in almost any AC or DC railway network, even in countries where the normal...
AC contactor / DC / power - CT1×15/08
Owing to a new blowout technology, CT Series contactors can be used in almost any AC or DC railway network, even in countries where the normal tolerances are exceeded. The single pole contactor ensures low-wear and reliable switching of both extremely low and very high loads. Double and triple pole styles are being developed.
Especially robust and environmentally friendly materials, from plastics featuring low smoke and low content of toxic gases up to cadmium-free contact tips, are used for the CT1000. It has been tested and approved by independent laboratories.
Especially robust and environmentally friendly materials, from plastics featuring low smoke and low content of toxic gases up to cadmium-free contact tips, are used for the CT1000. It has been tested and approved by independent laboratories.
DC contactor - 50 A DC | C137
The C137 series is a DC contractor suitable for battery-powered vehicles. It is a single pole and...
DC contactor - 50 A DC | C137
The C137 series is a DC contractor suitable for battery-powered vehicles. It is a single pole and no contractor device that has double break contacts. The device can be used for machines with a rated current of 50 A DC and 24 V coil voltage without any coil suppression. It can be accessed with an alternative version with blowout magnets and wide range of coil voltage tolerance.
DC contactor - 100 A DC | C163
The C163 C/ 24RX, which is manufactured by Schaltbau, is a single pole, normally opened contactor suitable...
DC contactor - 100 A DC | C163
The C163 C/ 24RX, which is manufactured by Schaltbau, is a single pole, normally opened contactor suitable for use in industrial, and railway applications with a voltage rating of 100 A DC, and coil voltage of 24 V without coil suppression. It has a rugged layout and it conforms with the EN 60947, EN 50124, and IEC 77-1 standards. There are models available with blowout magnets, and for AC voltages.
DC contactor - 220 A DC | C165
C165 H/ 24RX is a contactor for battery voltages. It is a single pole NO +NC contactor. With a current capacity of 220A and a coil voltage...
DC contactor - 220 A DC | C165
C165 H/ 24RX is a contactor for battery voltages. It is a single pole NO +NC contactor. With a current capacity of 220A and a coil voltage of 24V, it works without coil suppression. The features of this product include a compact design and double-break contacts. It has a wide range of coil voltage tolerances for railway applications and industrial applications.
The main contacts are replaceable. This version is available with blow-out magnets. Its standards include EN 60947, EN 50124, IEC 77-1 and it weighs 2150 g.
The main contacts are replaceable. This version is available with blow-out magnets. Its standards include EN 60947, EN 50124, IEC 77-1 and it weighs 2150 g.
Three-phase contactor - LVC series
The LVC series of contactors has been designed for industrial applications in which a high number of switching processes is required. Examples include loads...
Three-phase contactor - LVC series
The LVC series of contactors has been designed for industrial applications in which a high number of switching processes is required. Examples include loads from capacitors and motors. This contactor is ideal for operations of capacitor loads or banks between 3.3kV and 6.6kV. It has general features such as a interrupting methods, full electric arc control and heavy insulation. The set is comprised of three vacuum poles that work independently while assembled on the insulating structure.
Advantages include easy maintenance, highly optimized weight, compact size and lightweight design.
Advantages include easy maintenance, highly optimized weight, compact size and lightweight design.
Safety contactor / with safety locking device - 8 A, 25 - 250 V, max. 3.5 W | C4CK
C4CK Safety Relay with the captive key module surpassing the switch status. Polycarbonate and yellow,...
Safety contactor / with safety locking device - 8 A, 25 - 250 V, max. 3.5 W | C4CK
C4CK Safety Relay with the captive key module surpassing the switch status. Polycarbonate and yellow, weighs 227g with CE certification. Versions A & B have 2 LEDs and 1 line for test loop. Version A with key locked and turned has 4NO+1NC 8A/250V and the key removed has 4NC+1NO 8A/250V. Version B corresponds to 4NC+1NO 8A/250V and 4NO+1NC 8A/250V.