+7 (812) 645-08-06
AC/DC power supplies: rack-mount
select brand
AC/DC power supply / switch-mode / 19-" rack - 90 - 264 V AC, 40 A, 250 W
Characteristics:
* Extensive input volt scale
Ninety...
* Extensive input volt scale
Ninety...
AC/DC power supply / switch-mode / 19-" rack - 90 - 264 V AC, 40 A, 250 W
Characteristics:
* Extensive input volt scale
Ninety ... 264 VAC together with PFC or Power Factor Correction
* Four yield currents
* Plug P 47
* Repetitive functioning using Current Share Bus (CSB), or commonly known as hot-swap
* CompactPCI signalling
* Extensive input volt scale
Ninety ... 264 VAC together with PFC or Power Factor Correction
* Four yield currents
* Plug P 47
* Repetitive functioning using Current Share Bus (CSB), or commonly known as hot-swap
* CompactPCI signalling
AC/DC power supply / switch-mode / 19-" rack - 5 - 15 V, 100 W | maxpower
The Maxpower 100 W, dual is a wide range main input voltage of...
AC/DC power supply / switch-mode / 19-" rack - 5 - 15 V, 100 W | maxpower
The Maxpower 100 W, dual is a wide range main input voltage of 90-254 VAC and 100-360 VDC. It has active factor correction (PFC) with 80% efficiency. It also has a high power density as well as 2 output voltages of 12 V and 2 output current of 4 A.
AC/DC power supply / switch-mode / 19-" rack - 5 V, 100 W | maxpower
The Maxpower 100 W has 3 output voltages (5V, 12V and -12V) and a wide input...
AC/DC power supply / switch-mode / 19-" rack - 5 V, 100 W | maxpower
The Maxpower 100 W has 3 output voltages (5V, 12V and -12V) and a wide input voltage range from 90-254 VAC and 100-360 VDC. It features an active power-factor correction (PFC) and also has a high power density. It uses output voltage signaling and can be used with different accessories.
AC/DC power supply / switch-mode / 19-" rack - 12 - 24 V, 100 W | maxpower
This uses a variety of output voltages and...
AC/DC power supply / switch-mode / 19-" rack - 12 - 24 V, 100 W | maxpower
This uses a variety of output voltages and uses an active CSB. This can work with input voltages from 90 to 264 VAC or 100 to 360 VDC when an active PFC is used.
AC/DC power supply / switch-mode / 19-" rack - 5 - 24 V, 180 W | maxpower
This unit has an 83% efficiency rate and uses...
AC/DC power supply / switch-mode / 19-" rack - 5 - 24 V, 180 W | maxpower
This unit has an 83% efficiency rate and uses a singular output voltage. It has an input voltage range from 90 to 254 VAC or 100 to 360 VDC with an active PFC and active CSB.
AC/DC power supply / rack-mounted / with power factor correction (PFC) input / PFC - 12 V, 400 W | D1U2-W-400-12-HA4C
This power factor corrected front entry supply unit (400W) comes with a 5V (15W) standby and a 12V main output. Features include an active current...
AC/DC power supply / rack-mounted / with power factor correction (PFC) input / PFC - 12 V, 400 W | D1U2-W-400-12-HA4C
This power factor corrected front entry supply unit (400W) comes with a 5V (15W) standby and a 12V main output. Features include an active current sharing, front panel with status LEDs and PSMI and logic status signals.
Up to four supplies may be operated in parallel with the D1U2-W-400-12-HA4C. The supply, which may be hot plugged, comes in a low profile package (1U) and has a power density of >8W/cubic inch. This makes it ideal for delivering efficient and reliable power to other 12V distributed power systems, workstations, servers, etc.
Up to four supplies may be operated in parallel with the D1U2-W-400-12-HA4C. The supply, which may be hot plugged, comes in a low profile package (1U) and has a power density of >8W/cubic inch. This makes it ideal for delivering efficient and reliable power to other 12V distributed power systems, workstations, servers, etc.
AC/DC power supply / rack-mounted / with power factor correction (PFC) input / PFC - 12 V, 850 W | D1U3CS-W-850-12-HC3C
The D1U3CS-W-850-12-HxxC is a unit that has a 12V output and a 3.3V standby port. This unit runs at a total of 850 watts of power and...
AC/DC power supply / rack-mounted / with power factor correction (PFC) input / PFC - 12 V, 850 W | D1U3CS-W-850-12-HC3C
The D1U3CS-W-850-12-HxxC is a unit that has a 12V output and a 3.3V standby port. This unit runs at a total of 850 watts of power and can handle four units in a parallel pattern as needed. This is made with a good body that will work with many special standards in mind and can be hot plugged if needed. It will not be hurt by temperature faults and will use many status signals. This uses a low profile body and a small power density that is less than 15W per cubic inch, thus making it more reliable for many 12V systems.
AC/DC power supply / mains adapter / front end - 5 - 12 V, 1 200 W | D1U54P series
Murata, the top company in stocking power merchandise, recently released the new D1U54P series of 54mm wide, 1200 Watt devices. These...
AC/DC power supply / mains adapter / front end - 5 - 12 V, 1 200 W | D1U54P series
Murata, the top company in stocking power merchandise, recently released the new D1U54P series of 54mm wide, 1200 Watt devices. These have the highest efficiency rate that exceeds 94%; it also boasts power beyond 28 Watts per cubic inch. The units are only 54.5 x 321.5 x 40mm, so they measure up to typical industry arrangements. The cooling needs are lessened, saving power. In addition, this gives 8% more power and comes in two models, both with an output of 12 VDC and 1200 Watts, and an auxiliary output of % VDC at 15 Watts.
AC/DC power supply / mains adapter / front end - 3.3 - 48 V, 1 200 W | C1U-W-1200-48-TC1C
The C1U-W-1200 is a 1.2kW universal AC input PFC or Power-Factor-Corrected Front-End...
AC/DC power supply / mains adapter / front end - 3.3 - 48 V, 1 200 W | C1U-W-1200-48-TC1C
The C1U-W-1200 is a 1.2kW universal AC input PFC or Power-Factor-Corrected Front-End power supply. With 48V as main output and 5V, 3.3V, or 12V on standby. Designed to provide accurate power to servers or any 48V distributed power systems with high power density requirements. This device is designed for auto-recovery.
AC/DC power supply / rack-mounted / hot-swap - 12 V, 1 600 W | D1U-W-1600-12-HA2C
The D1U-W-1600 is a 1600 Watt, power-factor-corrected (PFC) front-end power supply for hot-swapping redundant systems. The main output is 12V and standby output of either 5V or 3.3V. Packaged in 1U low profi le, it is designed to deliver reliable bulk power to servers, workstations, storage systems or any 12V distributed power architecture
systems...
systems...
AC/DC power supply / rack-mounted / hot-swap - 12 V, 1 600 W | D1U-W-1600-12-HA2C
The D1U-W-1600 is a 1600 Watt, power-factor-corrected (PFC) front-end power supply for hot-swapping redundant systems. The main output is 12V and standby output of either 5V or 3.3V. Packaged in 1U low profi le, it is designed to deliver reliable bulk power to servers, workstations, storage systems or any 12V distributed power architecture
systems requiring high power density. The highly effi cient electrical and thermal design with internal cooling fans supports reliable operation conditions. The D1U-W-1600 is designed to auto-recover from over-temperature faults.
Status information is provided with front panel LEDs, logic signals and I2C management interface. Three units can be packaged into an optional 19" 1U power shelf to provide up to 4.8kW of power.
The S1U-3X is a 1U x 19" EIA Rack Mount Power Shelf designed for holding three D1U Front End Power Supplies in current sharing applications. It is intended for distributed power architecture applications in the Servers, Storage Networking and Data Communications markets. There are two lug terminal connections for #2 AWG cabling for the DC output. System connection through the I2C bus reports the performance status of the power supplies within the power shelf. Two Power Shelves can operate in parallel by an optional Shelf-to-Shelf cable, doubling the power output to the maximum capability of 9.6kW for two 12V power shelves.
systems requiring high power density. The highly effi cient electrical and thermal design with internal cooling fans supports reliable operation conditions. The D1U-W-1600 is designed to auto-recover from over-temperature faults.
Status information is provided with front panel LEDs, logic signals and I2C management interface. Three units can be packaged into an optional 19" 1U power shelf to provide up to 4.8kW of power.
The S1U-3X is a 1U x 19" EIA Rack Mount Power Shelf designed for holding three D1U Front End Power Supplies in current sharing applications. It is intended for distributed power architecture applications in the Servers, Storage Networking and Data Communications markets. There are two lug terminal connections for #2 AWG cabling for the DC output. System connection through the I2C bus reports the performance status of the power supplies within the power shelf. Two Power Shelves can operate in parallel by an optional Shelf-to-Shelf cable, doubling the power output to the maximum capability of 9.6kW for two 12V power shelves.
AC/DC power supply / mains adapter / rack-mounted / high-performance - 320 - 3000 W | PS 8000 series
The Electro Automatik's PS 8000 T/DT/2U has a voltage up to 720 V, and current ratings that range up to 120 A. It features interface...
AC/DC power supply / mains adapter / rack-mounted / high-performance - 320 - 3000 W | PS 8000 series
The Electro Automatik's PS 8000 T/DT/2U has a voltage up to 720 V, and current ratings that range up to 120 A. It features interface cards which can be plugged and digitally regulated, and also contains LED display. The cards are used for internal analogue interface, Ethernet and many more.
On the other hand, the PSI 8000 T/DT/2U model offers a 19 inch enclosure, which has 640 W up to 3000 W. It also features pluggable interface cards for galvanized separated analogue, USB and others.
On the other hand, the PSI 8000 T/DT/2U model offers a 19 inch enclosure, which has 640 W up to 3000 W. It also features pluggable interface cards for galvanized separated analogue, USB and others.
AC/DC power supply / rack-mounted / PFC / with power factor correction (PFC) input - 320 - 5 000 W | PS 800 R
The product has an active Power Factor Correction which makes it possible to use it worldwide on mains input from 90 V up to 264 V AC (models with up to 1500 W) or need a two phase input 340 V up to 460 V AC....
AC/DC power supply / rack-mounted / PFC / with power factor correction (PFC) input - 320 - 5 000 W | PS 800 R
The product has an active Power Factor Correction which makes it possible to use it worldwide on mains input from 90 V up to 264 V AC (models with up to 1500 W) or need a two phase input 340 V up to 460 V AC. Various units with voltage output ranges from 16 V to 360 V, current output ranging from 4 A to 170 A and power output ranging from 320 W to 5000 W, are buy- able. The output voltage can be adjusted from 0 V to the max voltage level. Fixed output units can be selected in units of 65 V. The device also has a floating over voltage protection (OVP) to protect the product from excess voltage and in the even of over voltage the product disconnects automatically and an alarm goes off on the analogue interface while an error LED glows. Analogue inputs with voltage ranges from 0 V. . . 10 V for set up voltage and current...
AC/DC power supply / switch-mode / rack-mounted
The PS 800 is a 19" power supply module manufactured by ELEKTRO-AUTOMATIK. It has a vasp input range from 90...264V with active PFC and works...
AC/DC power supply / switch-mode / rack-mounted
The PS 800 is a 19" power supply module manufactured by ELEKTRO-AUTOMATIK. It has a vasp input range from 90...264V with active PFC and works with an effectiveness of up to 92%. Its output powers, voltages and currents are 58W up to 240W, 3,3V up to 24V and 2.5A up to 30A, respectively. Its output can be single, double our triple. This device is power limited with all outputs for complete power. The outputs are all independently alterable and controlled. This device has an over-voltage and over-temperature protection. Moreover, it has an on /off remote and power signal.
AC/DC power supply / mains adapter / rack-mounted / high-performance - 600V, 1000V, 1500V, 30/70A, 10/15kW | PSI 8000 3U HS PV
The series PSI 8000 3U is extended by three new models with the new PSI 8000 3U PV models. These benefit from a built-in photovoltaics feature. It enables a burn-in and run-in...
AC/DC power supply / mains adapter / rack-mounted / high-performance - 600V, 1000V, 1500V, 30/70A, 10/15kW | PSI 8000 3U HS PV
The series PSI 8000 3U is extended by three new models with the new PSI 8000 3U PV models. These benefit from a built-in photovoltaics feature. It enables a burn-in and run-in test of solar inverters by simulating solar panels and their typical characteristics.
They can be supplied with output voltages of 600V, 1000V and 1500V. The output terminal is located in the rear panel. Every model includes a flexible auto-ranging output stage which provides a higher output voltage by reduced output current or, alternatively, a higher output current by a reduced output voltage. This is always regulated by the maximum output power. Therefore, a broad spectrum can be covered by one unit.
They can be supplied with output voltages of 600V, 1000V and 1500V. The output terminal is located in the rear panel. Every model includes a flexible auto-ranging output stage which provides a higher output voltage by reduced output current or, alternatively, a higher output current by a reduced output voltage. This is always regulated by the maximum output power. Therefore, a broad spectrum can be covered by one unit.
AC/DC power supply / high-voltage rectifier / rack-mounted / programmable - 3.3kW, 5kW, 6.6kW, 10kW, 15kW, 0-1500 V
Latest series of PSI 8000 3U is an extension of the previous PSI 8000 2U series by the 18 new models with different power rating in the range 3.3kW up to 15kW in 19 inch rack covers and 3U height. It can be configured in the two cabinet systems up to 150kW and up to 42U according...
AC/DC power supply / high-voltage rectifier / rack-mounted / programmable - 3.3kW, 5kW, 6.6kW, 10kW, 15kW, 0-1500 V
Latest series of PSI 8000 3U is an extension of the previous PSI 8000 2U series by the 18 new models with different power rating in the range 3.3kW up to 15kW in 19 inch rack covers and 3U height. It can be configured in the two cabinet systems up to 150kW and up to 42U according to the requirements of customers. You can get output voltages between 40V and 1500V, output currents between 30A and 5100A and output powers between 3.3kW and 150kW. The rear panel models have output terminal for your convenience.
All models of this series have flexible auto-ranging output stage to facilitate the higher output voltage needs by decreasing the output current or the higher output current can be reduced via output voltage. The process is always regulated by the maximum output power and the wide application spectrum is already covered by one unit. The 40V models are constructed to meet with the requirements of low voltage applications. The set values and actual values of the output voltage, output current and output power is clearly displayed with the graphic displays.
All models of this series have flexible auto-ranging output stage to facilitate the higher output voltage needs by decreasing the output current or the higher output current can be reduced via output voltage. The process is always regulated by the maximum output power and the wide application spectrum is already covered by one unit. The 40V models are constructed to meet with the requirements of low voltage applications. The set values and actual values of the output voltage, output current and output power is clearly displayed with the graphic displays.