+7 (812) 645-08-06
Power resistors and capacitors
select brand
Power resistor / vitreous enamel / wire-wound - max. 0.068 kΩ, max. 1 000 W | RCA series
The RCA Series comprises of a wire-wound resistor that is coated with vitreous enamel....
Power resistor / vitreous enamel / wire-wound - max. 0.068 kΩ, max. 1 000 W | RCA series
The RCA Series comprises of a wire-wound resistor that is coated with vitreous enamel. It is designed with an enhanced heat dissipation features. A minimal ohmic value and a minimal inductance rate are also integrated. The resistor is made available for RCA-6 to RCA-10 range. It provides a maximum electrical resistance of 0.068 kΩ.
Edgewound resistor - min. 0.018 Ω, 180 - 3 300 W | TOFIL - BC series
The Edgewood Resistors are made of a coil of edge wound heavy resistance alloy ribbon with groove insulators. The current of the...
Edgewound resistor - min. 0.018 Ω, 180 - 3 300 W | TOFIL - BC series
The Edgewood Resistors are made of a coil of edge wound heavy resistance alloy ribbon with groove insulators. The current of the resistor reaches up to 103 A while it ohmic values atarts at 0,018 ohm. It uses a power rating that ranges to 3300 watts in continuous duty and natural-air cooling devices.
It has two models, the standard TOFIL and BC series. Both have the same edge wound resistance coils and electrical characteristics. They only differ in terms of mechanical structure and dimensions.
It has two models, the standard TOFIL and BC series. Both have the same edge wound resistance coils and electrical characteristics. They only differ in terms of mechanical structure and dimensions.
Woven resistor - max. 10 kΩ, max. 1 100 W
The Coudoint Woven Resistors represent an excellent solution for use in various applications such as load banks (portable or on-board), EHV, as heating resistor for dryers, drying cupboards, heating rings (pipes, filters)...
Woven resistor - max. 10 kΩ, max. 1 100 W
The Coudoint Woven Resistors represent an excellent solution for use in various applications such as load banks (portable or on-board), EHV, as heating resistor for dryers, drying cupboards, heating rings (pipes, filters) or heating cases, or as heating or defrosting resin overmolded resistor. These flexible mats are made using a resistance weft wire, nonconductive chain warp thread wire and plain end strips providing mechanical fixation, creating a semi-rigid foil that supports one or more resistors. This technology allows the construction of power resistors with high ohmic value (from 1 Ω to over 10 kΩ) that are both compact and very light (960 W resistor weighing only 150 g). Additionally it offers good thermal characteristics, high voltage tolerance, low inductance (due to absence of coils in the resistance circuit) and excellent dimensional flexibility.
Booster resistor - W series
Spohn & Burkhardt resistors offers single elements and hosting devices. It's elements are W4, W24, W25, W5, W17 - W17-5.
Mobile capacitor bank - max. 245 kV
CG Global's Mobile Capacitor Banks are generally utilized in networks that temporarily require reactive power compensation...
Mobile capacitor bank - max. 245 kV
CG Global's Mobile Capacitor Banks are generally utilized in networks that temporarily require reactive power compensation systems. Compensation systems are needed by networks whenever they encounter quickly changing infrastructure or deregulation changes. These mobile banks are capable of being conveyed by semi-trailer trucks. They can be integrated with capacitor components, HV disconnector apparatuses, HV breaker devices, voltage transformer systems, and control panels.