+7 (812) 645-08-06
Fans for electronics
select brand
Flat fan - 74 l/min | C2510 series
The C2510 series is a slim fan that consists of a frame and propeller fabricated from...
Flat fan - 74 l/min | C2510 series
The C2510 series is a slim fan that consists of a frame and propeller fabricated from thermoplastic Polybutylene terephthalate material based on UL94-VO standards. Integrated either with a ball or sleeve bearing, this industrial fan is equipped with a lead-made wire that complies with UL 1061 requirements and is 240 mm long.
Flat fan - 60 - 90 l/min | F30 series
The Slim Fan F38 Series is manufactured by Micronel. The product features...
Flat fan - 60 - 90 l/min | F30 series
The Slim Fan F38 Series is manufactured by Micronel. The product features a tacho signal and the actual speed or rpm can be measured. Utilizing an external control, the speed can be adjusted such as speed or air volume supply controlled by temperature necessities.
DC fan / turbine - 51 x 51 x 15 mm - 97 x 94 x 33 mm | RB series
General Specifications
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type...
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type...
DC fan / turbine - 51 x 51 x 15 mm - 97 x 94 x 33 mm | RB series
General Specifications
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type
(+):Red (-):Black
●Operation Temperature:-10℃～70℃、
35%～85%RH
●Storage Temperature: -40℃～80℃、
35%～85%RH
Motor Protection
●Impedance protected
●Reverse Polarity Protected
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type
(+):Red (-):Black
●Operation Temperature:-10℃～70℃、
35%～85%RH
●Storage Temperature: -40℃～80℃、
35%～85%RH
Motor Protection
●Impedance protected
●Reverse Polarity Protected
DC fan / turbine - 120 x 120 x 32 mm - 182 x 171 x 82 mm | PB series
General Specifications
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type...
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type...
DC fan / turbine - 120 x 120 x 32 mm - 182 x 171 x 82 mm | PB series
General Specifications
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type
(+):Red (-):Black
●Operation Temperature:-10℃～70℃、
35%～85%RH
●Storage Temperature: -40℃～80℃、
35%～85%RH
Motor Protection
●Impedance protected
●Reverse Polarity Protected
●Frame and Impeller: Thermal Plastic,UL 94V-0
●Lead Wires:UL Type
(+):Red (-):Black
●Operation Temperature:-10℃～70℃、
35%～85%RH
●Storage Temperature: -40℃～80℃、
35%～85%RH
Motor Protection
●Impedance protected
●Reverse Polarity Protected
AC fan / turbine - 121 x 121 x 37 mm - 189 x 183 x 70 mm | AB series
Frame: Spiral housing of fiberglass-reinforced
Polycarbonate housing
Base of galvanized steelplate
Impeller : Thermoplastic...
Polycarbonate housing
Base of galvanized steelplate
Impeller : Thermoplastic...
AC fan / turbine - 121 x 121 x 37 mm - 189 x 183 x 70 mm | AB series
Frame: Spiral housing of fiberglass-reinforced
Polycarbonate housing
Base of galvanized steelplate
Impeller : Thermoplastic PBT, UL94V-0.
Bearing: Ball or sleeve.
Operating Voltage: 85V~125V for 115V Type;
185V~245V for 230V Type.
Dielectric Strength: 1,500VAC for 1 minute.
Insulation: Class B
Insulation Resistance: 100,000 Ohms min. @ 500VDC
Operating temperature : -20℃ to +80℃ for ball type;
-10℃ to +70℃ for ball type.
Safety: Impedance Protected.
Polycarbonate housing
Base of galvanized steelplate
Impeller : Thermoplastic PBT, UL94V-0.
Bearing: Ball or sleeve.
Operating Voltage: 85V~125V for 115V Type;
185V~245V for 230V Type.
Dielectric Strength: 1,500VAC for 1 minute.
Insulation: Class B
Insulation Resistance: 100,000 Ohms min. @ 500VDC
Operating temperature : -20℃ to +80℃ for ball type;
-10℃ to +70℃ for ball type.
Safety: Impedance Protected.
AC fan / turbine - 207 x 68 x 211.3 mm - 273 x 220 x 202 mm | RC series
Impeller: PP UL94V-O Reinforced Plastic(f1)
Frame: ②PA6 UL94V-O Reinforced Plastic PP...
Frame: ②PA6 UL94V-O Reinforced Plastic PP...
AC fan / turbine - 207 x 68 x 211.3 mm - 273 x 220 x 202 mm | RC series
Impeller: PP UL94V-O Reinforced Plastic(f1)
Frame: ②PA6 UL94V-O Reinforced Plastic PP UL94V-O Reinforced Plastic(f1)
Lead Wire:SPT-2(W) OR Customize Design(Optional)
Motor: Shaded Pole Induction Motor
Insulation:Class B Thermally protected
Safety: UL.CUL.TUV.CE
Operation Temperature:-30℃～+70℃
Frame: ②PA6 UL94V-O Reinforced Plastic PP UL94V-O Reinforced Plastic(f1)
Lead Wire:SPT-2(W) OR Customize Design(Optional)
Motor: Shaded Pole Induction Motor
Insulation:Class B Thermally protected
Safety: UL.CUL.TUV.CE
Operation Temperature:-30℃～+70℃
Active cooler - 0.85 - 5.30 K/W | HYB, HFB, HF series
Advantages
Small chip-cooler / radial-fan
Metal-housing
Wide operating temperature range
Precision ball bearing
Virtually no premature failure thanks to burn-In
High resistance to shock...
Small chip-cooler / radial-fan
Metal-housing
Wide operating temperature range
Precision ball bearing
Virtually no premature failure thanks to burn-In
High resistance to shock...
Active cooler - 0.85 - 5.30 K/W | HYB, HFB, HF series
Advantages
Small chip-cooler / radial-fan
Metal-housing
Wide operating temperature range
Precision ball bearing
Virtually no premature failure thanks to burn-In
High resistance to shock...
Small chip-cooler / radial-fan
Metal-housing
Wide operating temperature range
Precision ball bearing
Virtually no premature failure thanks to burn-In
High resistance to shock...