+7 (812) 645-08-06
Junction boxes, terminal boxes
select brand
Stainless steel junction box - S1...8-INOX - Boite de jonction ATEX
The S1 8 INOX ATEX is a stainless steel junction box manufactured by AET. This junction box offers an IP 66 and IP 67 level of protection. This device...
Stainless steel junction box - S1...8-INOX - Boite de jonction ATEX
The S1 8 INOX ATEX is a stainless steel junction box manufactured by AET. This junction box offers an IP 66 and IP 67 level of protection. This device...
Explosion-proof junction box - PL610-STD ATEX GRP
The PL610-STD is an ATEX junction box. Equipped with a black GRP; it has 6 terminals, with 2.5-mm² configurations. The cable entries and nylon cable glands are 2 x M20. The...
Explosion-proof junction box - PL610-STD ATEX GRP
The PL610-STD is an ATEX junction box. Equipped with a black GRP; it has 6 terminals, with 2.5-mm² configurations. The cable entries and nylon cable glands are 2 x M20. The...
Splice box - TRAVERSEES DE CLOISONS - Transit system
The safety feature of the cable transit system preserves the purity of a firewall, bulkhead or deck through which cables, pipes and other services pass through for any given operation. It pretends to be an inaccessible block against...
Splice box - TRAVERSEES DE CLOISONS - Transit system
The safety feature of the cable transit system preserves the purity of a firewall, bulkhead or deck through which cables, pipes and other services pass through for any given operation. It pretends to be an inaccessible block against water, fire, gas, chemicals, smoke, radiation, dust, insects and rodents. With 5 faces of disconnected joints during compression, the compression blocks are available in seven block sizes housing service diameters ranging from 3 to 100 mm, engineered with a degree of adjustability for accommodation of various cable diameters, with the tolerance width carved into each block with a distinctive color code. Each compression block size has its own color to help ensure that the two half-blocks have been paired in accordance during assembly. There is also a patented compression unit, where the piece compresses and finishes the seal while guaranteeing even compression levels.
Photovoltaic junction box - IP66, IK10, Nema 1,2,3r,4x12 | SUNBOX
Stainless steel AISI 304 electrical enclosures for renewable SUNBOX are durable and advance units for outdoor use. These are specifically installed to easily bear all extreme conditions, including solar and wind. The stainless steel enclosures are durable...
Photovoltaic junction box - IP66, IK10, Nema 1,2,3r,4x12 | SUNBOX
Stainless steel AISI 304 electrical enclosures for renewable SUNBOX are durable and advance units for outdoor use. These are specifically installed to easily bear all extreme conditions, including solar and wind. The stainless steel enclosures are durable and manufactured by the Delvalle with the major experience in the brands. The cabinet is specifically designed to withstand the extreme weather. It is used for the solar power system and has one piece mono block for the added protection to electrical and electronic components.
The enclosure has IP66 sealing and IK10 maximum resistance. It is designed with the protective film to avoid scratches and corrosion during use. The stainless steel construction provides durable sealing and maximum resistance. It has a waterproof seal to absorb moisture and can automatically condensate disposal. The control panel is available with the dual-bit handles manufactured with stainless steel. No maintenance is required and the maximum life is more than 30 years.
The enclosure has IP66 sealing and IK10 maximum resistance. It is designed with the protective film to avoid scratches and corrosion during use. The stainless steel construction provides durable sealing and maximum resistance. It has a waterproof seal to absorb moisture and can automatically condensate disposal. The control panel is available with the dual-bit handles manufactured with stainless steel. No maintenance is required and the maximum life is more than 30 years.
Splice box - GEO series
Delvalle junction box is suitable for delicate electronics and electric equipment as it provides...
Splice box - GEO series
Delvalle junction box is suitable for delicate electronics and electric equipment as it provides protection against harsh conditions. The product comes with a knife edge perimeter to stop dirt and liquids from entering the enclosure when it is in the open position. It comes with powder paint finish for durability. It is available with or without gland panels.
Stainless steel terminal box - IP44 / IK10 | SSTB series
SSTB, Stainless Steel Terminal Box
Material:
AISI 304 pre-grained stainless steel / AISI 316 (on request). Body: 1mm. Door: 1.5mm.
Body:
Folded and seam welded....
Material:
AISI 304 pre-grained stainless steel / AISI 316 (on request). Body: 1mm. Door: 1.5mm.
Body:
Folded and seam welded....
Stainless steel terminal box - IP44 / IK10 | SSTB series
SSTB, Stainless Steel Terminal Box
Material:
AISI 304 pre-grained stainless steel / AISI 316 (on request). Body: 1mm. Door: 1.5mm.
Body:
Folded and seam welded. Four M6x13 studs for Bottom Profile/ Mounting Plate fixation.
Gasket:
Sealing is ensured by an injected one piece polyurethane gasket.
Earthing:
Earthing studs M8x12mm in body and cover, M8 nuts, earth washers, and earth labels.
Protection:
Complies with IP66 and NEMA 4X,12,13 , IK10.
Finish:
240s pre-grained stainless steel (average 0,5 micron).
Approvals:
CE,KEMA,cUL,UL
Delivery:
Base, cover, cover screws, fixing screws, cover plugs, and earthing facilities.
Material:
AISI 304 pre-grained stainless steel / AISI 316 (on request). Body: 1mm. Door: 1.5mm.
Body:
Folded and seam welded. Four M6x13 studs for Bottom Profile/ Mounting Plate fixation.
Gasket:
Sealing is ensured by an injected one piece polyurethane gasket.
Earthing:
Earthing studs M8x12mm in body and cover, M8 nuts, earth washers, and earth labels.
Protection:
Complies with IP66 and NEMA 4X,12,13 , IK10.
Finish:
240s pre-grained stainless steel (average 0,5 micron).
Approvals:
CE,KEMA,cUL,UL
Delivery:
Base, cover, cover screws, fixing screws, cover plugs, and earthing facilities.
Splice box / aluminium - IP 66 | HALP series
The HALP is an aluminum terminal box manufactured by Eldon. Created with an aluminium type...
Splice box / aluminium - IP 66 | HALP series
The HALP is an aluminum terminal box manufactured by Eldon. Created with an aluminium type...