+7 (812) 645-08-06
Console enclosures, control enclosures
select brand
Control enclosure - ECB-1000Q
The ECB 1000Q by Elitech is a control box which is used for small to medium size cold storage. The...
Control enclosure - ECB-1000Q
The ECB 1000Q by Elitech is a control box which is used for small to medium size cold storage. The units comes with a refrigeration function, defrost mode, a fan, light control, alarm and time display. The LED status display has a password protection so that it may prevent accidental changes in scheduled refrigeration and defrosting time which will save you energy especially at night.
Control enclosure / smart with graphic display - 164 x 102 x 50 mm | 25-37
The Panel Frame Model 25-37 is moulded...
Control enclosure / smart with graphic display - 164 x 102 x 50 mm | 25-37
The Panel Frame Model 25-37 is moulded...
Control enclosure / smart with graphic display - 250 x 150 x 54 mm | 25-38
The Panel Frame Model 25-38 is constructed out of...
Control enclosure / smart with graphic display - 250 x 150 x 54 mm | 25-38
The Panel Frame Model 25-38 is constructed out of...
Control enclosure / smart with graphic display - 385 x 250 x 60 mm | 25-45
The Changhe 24-45 panel frame has been molded in ABS and has a display measuring...
Control enclosure / smart with graphic display - 385 x 250 x 60 mm | 25-45
The Changhe 24-45 panel frame has been molded in ABS and has a display measuring...
Control enclosure / smart with graphic display - 255 x 162 x 56 mm | 25-51
The 25-51 panel frame, manufactured by Ningbo Dayang Enclosure Co., Ltd,...
Control enclosure / smart with graphic display - 255 x 162 x 56 mm | 25-51
The 25-51 panel frame, manufactured by Ningbo Dayang Enclosure Co., Ltd, is moulded in aluminium which is compatible with its 7" LCD. It has a standard color which is cream-colored and it also has an optional color of black that is available. The model has a volume of 255 x 162 x 56 mm.
Input enclosure / for suspension arm system - Carrytec
Carrytec is a flexbile and functional handle that performs different tasks in situations whichever the condition or location is.
This unit is made of...
This unit is made of...
Input enclosure / for suspension arm system - Carrytec
Carrytec is a flexbile and functional handle that performs different tasks in situations whichever the condition or location is.
This unit is made of enhanced impact-resistant plastic to consolidate its design. It has a non-slip feature and is attached above the center of gravity of the device. This handle can also be installed in the rear of tripods or support arm systems with fast positioning and visible alignment.
The product also contains a large surface area that can go as large as 13,4"/34 cm that is useful for user interfaces. It has holding clamps for attaching on round tubes and equipment rails.
This unit is made of enhanced impact-resistant plastic to consolidate its design. It has a non-slip feature and is attached above the center of gravity of the device. This handle can also be installed in the rear of tripods or support arm systems with fast positioning and visible alignment.
The product also contains a large surface area that can go as large as 13,4"/34 cm that is useful for user interfaces. It has holding clamps for attaching on round tubes and equipment rails.
Input enclosure / plastic / handheld - IP40 / IP41 | MINITEC
Tactile Remote Control Enclosures perfect design for personal electronics
MINITEC enclosures convince the user with their mini-dimensions and maximum-benefits. Chose between the technical MINITEC EDGE design, or the more organic MINITEC DROP shape....
MINITEC enclosures convince the user with their mini-dimensions and maximum-benefits. Chose between the technical MINITEC EDGE design, or the more organic MINITEC DROP shape....
Input enclosure / plastic / handheld - IP40 / IP41 | MINITEC
Tactile Remote Control Enclosures perfect design for personal electronics
MINITEC enclosures convince the user with their mini-dimensions and maximum-benefits. Chose between the technical MINITEC EDGE design, or the more organic MINITEC DROP shape. ◾modern, flat styling *** iF product design award ***
◾easy to wear and always within easy reach, e.g. round your neck or round your wrist, on your key ring or on a belt
◾intermediate rings in different versions and colours; TPE material for a pleasant touch sensation and impact protection
◾ABS (UL 94 HB); also available in infra-red light-permeable PMMA plexiglass
◾recessed operating area for protecting the membrane keypad or decorative foil/label; MINITEC Edge models also with smooth top for push-buttons
◾protection class IP 41: design Edge (size M) and Drop (sizes S and M) with intermediate ring in TPE, all others IP 40
◾ordered as individual components for multiple type/colour combinations, 3 sizes each
MINITEC enclosures convince the user with their mini-dimensions and maximum-benefits. Chose between the technical MINITEC EDGE design, or the more organic MINITEC DROP shape. ◾modern, flat styling *** iF product design award ***
◾easy to wear and always within easy reach, e.g. round your neck or round your wrist, on your key ring or on a belt
◾intermediate rings in different versions and colours; TPE material for a pleasant touch sensation and impact protection
◾ABS (UL 94 HB); also available in infra-red light-permeable PMMA plexiglass
◾recessed operating area for protecting the membrane keypad or decorative foil/label; MINITEC Edge models also with smooth top for push-buttons
◾protection class IP 41: design Edge (size M) and Drop (sizes S and M) with intermediate ring in TPE, all others IP 40
◾ordered as individual components for multiple type/colour combinations, 3 sizes each
Wall-mount enclosure / ergonomic / operator interface - IP54 | INTERFACE-TERMINAL
Multifunction electronic enclosures
Highly innovative modular enclosures system which can be configured to meet all the requirements of todays man-machine interfaces.
◾aesthetic and ergonomic design...
Highly innovative modular enclosures system which can be configured to meet all the requirements of todays man-machine interfaces.
◾aesthetic and ergonomic design...
Wall-mount enclosure / ergonomic / operator interface - IP54 | INTERFACE-TERMINAL
Multifunction electronic enclosures
Highly innovative modular enclosures system which can be configured to meet all the requirements of todays man-machine interfaces.
◾aesthetic and ergonomic design
◾uniquely, the operator can decide to use the electronics as a mobile or as a stationary unit
◾plenty of space for operating elements, graphic displays and touch screens (S: 6.4"/16 cm, M: 8.4"/21 cm, L: 10.4"/26 cm)
◾available with either flat or high bottom part for individual installation configurations, interfaces, cable inputs and outputs etc.
◾optional front panel styles: ABS cover and flat panel, aluminium front panel and glass panel for touch screens
new: ABS cover size L ready to install of an iPad Air available as standard; installation of other tablets on demand
Highly innovative modular enclosures system which can be configured to meet all the requirements of todays man-machine interfaces.
◾aesthetic and ergonomic design
◾uniquely, the operator can decide to use the electronics as a mobile or as a stationary unit
◾plenty of space for operating elements, graphic displays and touch screens (S: 6.4"/16 cm, M: 8.4"/21 cm, L: 10.4"/26 cm)
◾available with either flat or high bottom part for individual installation configurations, interfaces, cable inputs and outputs etc.
◾optional front panel styles: ABS cover and flat panel, aluminium front panel and glass panel for touch screens
new: ABS cover size L ready to install of an iPad Air available as standard; installation of other tablets on demand
Input enclosure / plastic / handheld - IP40 | Blob
Handheld enclosures modeled for the hand
Inspired by the touch sensation, the design of the BLOB family of enclosures is entirely focused on the...
Inspired by the touch sensation, the design of the BLOB family of enclosures is entirely focused on the...
Input enclosure / plastic / handheld - IP40 | Blob
Handheld enclosures modeled for the hand
Inspired by the touch sensation, the design of the BLOB family of enclosures is entirely focused on the needs of the user.
◾high level of practical value thanks to a convincing touch sensation; the users hands intuitively grasp the enclosure in the correct way
** iF product design award 2014 | German Design Award 2015 **
◾the enclosures are designed to provide an natural grasp position which guides the operators hands to the controls
◾gentle and at the same time rugged
◾huge number of possible applications
◾3 types
Inspired by the touch sensation, the design of the BLOB family of enclosures is entirely focused on the needs of the user.
◾high level of practical value thanks to a convincing touch sensation; the users hands intuitively grasp the enclosure in the correct way
** iF product design award 2014 | German Design Award 2015 **
◾the enclosures are designed to provide an natural grasp position which guides the operators hands to the controls
◾gentle and at the same time rugged
◾huge number of possible applications
◾3 types
Input enclosure / plastic / handheld - IP65 | DATEC-MOBIL-BOX
Robust IP65 Handheld Enclosures
These high performance cases have been tailor made to meet the needs of mobile data collection devices used indoor or outdoor.
◾ergonomic...
These high performance cases have been tailor made to meet the needs of mobile data collection devices used indoor or outdoor.
◾ergonomic...
Input enclosure / plastic / handheld - IP65 | DATEC-MOBIL-BOX
Robust IP65 Handheld Enclosures
These high performance cases have been tailor made to meet the needs of mobile data collection devices used indoor or outdoor.
◾ergonomic profile for comfortable holding and operating
◾robust with a high protection class up to IP65 (sealing kit accessory)
◾designed for installing standard LCD modules; accessory acrylic display windows protect the display area and guarantee a high protection class
◾plain surfaces for interfaces
◾three sizes in two colours
◾sizes S and L with/without a battery compartment
◾size M with battery compartment lid only - battery holders ordered separately
These high performance cases have been tailor made to meet the needs of mobile data collection devices used indoor or outdoor.
◾ergonomic profile for comfortable holding and operating
◾robust with a high protection class up to IP65 (sealing kit accessory)
◾designed for installing standard LCD modules; accessory acrylic display windows protect the display area and guarantee a high protection class
◾plain surfaces for interfaces
◾three sizes in two colours
◾sizes S and L with/without a battery compartment
◾size M with battery compartment lid only - battery holders ordered separately