+7 (812) 645-08-06
Connectors: wire-to-board
select brand
Board-to-wire connector / subminiature - 1.5 mm | AMP Mini CT
AMP Mini CT connectors are a miniature wire-to-board interconnect solution similar to the proven performance in harness making capability...
Board-to-wire connector / subminiature - 1.5 mm | AMP Mini CT
AMP Mini CT connectors are a miniature wire-to-board interconnect solution similar to the proven performance in harness making capability of the standard AMP CT Connector Series. Wide choices in harness-making choices in harness-making machines are available ranging from hand tools used for low volume production to automatic crimping machines. Crimp and Mass Terminated (MT) are the two housings available; these are both preloaded with insulation displacement contacts. With 1.5 mm pitch designed connectors.
Board-to-wire connector - 0.1 in, 28 - 22 AWG | MTA-100
Mass wire termination drastically reduces labor involved in cable or harness
assembly. The MTA-100 IDC connector system is a wire-to-board and
wire-to-wire system with contacts in a single...
assembly. The MTA-100 IDC connector system is a wire-to-board and
wire-to-wire system with contacts in a single...
Board-to-wire connector - 0.1 in, 28 - 22 AWG | MTA-100
Mass wire termination drastically reduces labor involved in cable or harness
assembly. The MTA-100 IDC connector system is a wire-to-board and
wire-to-wire system with contacts in a single row on .100 [2.54] centerline.
It provides wire feed-through capability for daisy-chain applications. In order
to remove a variety of conductor sizes it uses insulation displacement contacts
and in cases where the receptacle assembly and strain relief cover are employed,
the ribbon cable can be removed as well. Header assemblies for board mount
applications are provided with right-angle and vertical mount and in through-hole
and surface mount configurations. Connectors and headers are available for
positions 2-28 and shrouded headers for 2-14.
assembly. The MTA-100 IDC connector system is a wire-to-board and
wire-to-wire system with contacts in a single row on .100 [2.54] centerline.
It provides wire feed-through capability for daisy-chain applications. In order
to remove a variety of conductor sizes it uses insulation displacement contacts
and in cases where the receptacle assembly and strain relief cover are employed,
the ribbon cable can be removed as well. Header assemblies for board mount
applications are provided with right-angle and vertical mount and in through-hole
and surface mount configurations. Connectors and headers are available for
positions 2-28 and shrouded headers for 2-14.
Board-to-wire connector / for flexible flat cables - 0.05 in | AMPMODU series
The AMPMODU 50/50 Grid connector family are categorized to 3 groups: board-mount headers, board-mount receptacles and cable-to-board receptacles and header assemblies. It also includes...
Board-to-wire connector / for flexible flat cables - 0.05 in | AMPMODU series
The AMPMODU 50/50 Grid connector family are categorized to 3 groups: board-mount headers, board-mount receptacles and cable-to-board receptacles and header assemblies. It also includes wide variety of high density board-to-board and cable-to-board connectors. The polarized protective housing prevents incorrect mating for contact protection and added user safety. Contact termination covers are suited for supporting long life application cycles. The dual beam contact is very reliable to severe shock/vibration applications. With the variety of possibilities of components and application, combine that with the small size, outstanding quality and reliability, it is very suitable for high density systems and ribbon cable termination.
Board-to-wire connector / for flexible flat cables - 0.0252 - 0.1 in | AMPMODU / AMP-LATCH series
These items are part of the TE connectivity family of products and come in various shapes and sizes, making it easier to choose exactly what you...
Board-to-wire connector / for flexible flat cables - 0.0252 - 0.1 in | AMPMODU / AMP-LATCH series
These items are part of the TE connectivity family of products and come in various shapes and sizes, making it easier to choose exactly what you are looking for and find an item that matches the requirements of your application.
There are various features and benefits made available by the manufacturer, and some of the most important ones are the interline contact spacing, which has been fitted there for efficient use of the space available. In addition to this, the connector lines are of type TE and are similar to those in other product families.
There are various features and benefits made available by the manufacturer, and some of the most important ones are the interline contact spacing, which has been fitted there for efficient use of the space available. In addition to this, the connector lines are of type TE and are similar to those in other product families.
Board-to-wire connector / FPC - 0.25 - 1.25 mm
FPC is a solution that ideally interconnects with small centerline spacing to make larger wire to board inter connections seemingly redundant. As the industry is swayed towards the direction...
Board-to-wire connector / FPC - 0.25 - 1.25 mm
FPC is a solution that ideally interconnects with small centerline spacing to make larger wire to board inter connections seemingly redundant. As the industry is swayed towards the direction of miniaturization, FPC connections have been created to meet the demand of this rising industry which requires smaller centerline or pitch spacing, lower profile heights, and lighter interconnect solutions. The TE Connectivity (TE) FPC solutions has a reliable reputation that uses an actuator to stabilize cable elimination and can also be terminated on the field and requires no equipment. Centerline spacing for FPC solutions are available in: 0.25mm, 0.3mm, 0.5mm, 1.0mm and 1.25mm. a low profile height and light weight features may be incorporated in to the solution.
Board-to-wire connector / FPC
Narrow Pitch Connector series for board to FPC
2-piece type narrow pitch connector for substrate and FPC connection with 0.9 to 4.0 mm mating height. Pitch between terminals is 0.35 to 0.5 mm.
2-piece type narrow pitch connector for substrate and FPC connection with 0.9 to 4.0 mm mating height. Pitch between terminals is 0.35 to 0.5 mm.
Board-to-wire connector / FPC/FFC
The Panasonic FPC/FFC Connector series have a pitch between terminals of 0.3 and 0.5mm and a height of 0.9 tp 2.0mm. The Y3BW back lock is used in devices like...
Board-to-wire connector / FPC/FFC
The Panasonic FPC/FFC Connector series have a pitch between terminals of 0.3 and 0.5mm and a height of 0.9 tp 2.0mm. The Y3BW back lock is used in devices like still cameras, automatic video cameras, cell phones and smart phones.
The connector series are RoHS compliant and have a unique low profile design which is slim. The connector series have an independent mechanical layout which is obtained through the dual top and bottom contacts.
The connector wiring could be placed beneath the connector. The connector has superior resistence Ni barrier to solder creepage and an easy to handle back lock design.
The connector series are RoHS compliant and have a unique low profile design which is slim. The connector series have an independent mechanical layout which is obtained through the dual top and bottom contacts.
The connector wiring could be placed beneath the connector. The connector has superior resistence Ni barrier to solder creepage and an easy to handle back lock design.
FPC connector / board-to-wire - 0.35 - 0.5 mm
The Narrow Pitch (Board to FPC) Connectors Product Lineup by Panasonic is a one...
FPC connector / board-to-wire - 0.35 - 0.5 mm
The Narrow Pitch (Board to FPC) Connectors Product Lineup by Panasonic is a one of a kind ingenious product. Designed for a variety of applications. It features Ultra small size contributes to the miniaturization and functionality enhancement of target equipment with a 0.35mm to 0.5mm terminal pitch , 2.2mm Etc.
Board-to-wire connector / FPC/FFC - 0.3 - 0.5 mm
Presenting a revolutionary new product . The FPC / FFC Connectors Product...
Board-to-wire connector / FPC/FFC - 0.3 - 0.5 mm
Presenting a revolutionary new product . The FPC / FFC Connectors Product Lineup made by Panasonic. It features Low profile 0.3mm pitch series and 0.5mm pitch series that can be utilized in a wide range of digital devices. A definite must have and a worthy investment for Quality and reliability.