Gauge blocks, granite surface plates, feeler gauges, setting rings

select brand


MITUTOYO

Gauge block set - 516 series

Designed by Mitutoyo, the rectangular gauge block is a practical master gauge for dimensional measurement. There are four classes of gauge available: Class K, Class...

Gauge block set - 516 series

Designed by Mitutoyo, the rectangular gauge block is a practical master gauge for dimensional measurement. There are four classes of gauge available: Class K, Class O, Class 1 and Class 2 as well as two types or ceramic and steel gauge blocks.

The long size gauge block accessory sets BMX-S1 includes accessories for gauge blocks with a minimum nominal size of 125 mm. They are utilized to create the masters of size and height and can be supplied with a scriber.

The square gauge block has dimensions of 24.1 x 24.1. It is available in three classes of Class 0, Class 1 and Class 2. It enables absolute wringing by using the hole.

Gauge block comparator - 0.1 - 250 mm | GBI

The automatic Gauge Block Interferometer (GBI) employs the principle of multiple wavelength coincidences to precisely and accurately calibrate lengths. It measures gauge block lengths ranging from 0.1mm...

Gauge block comparator - 0.1 - 250 mm | GBI

The automatic Gauge Block Interferometer (GBI) employs the principle of multiple wavelength coincidences to precisely and accurately calibrate lengths. It measures gauge block lengths ranging from 0.1mm to 250mm by employing optical interference, which is automatically detected via interference fringe analysis software along with a CCD camera and then the data is processed and displayed.

Parallelism and flatness is measured through appropriate measurement provisions. Highly accurate and repeatable measurement is achieved by GBI on account of the highly stable intensity and wavelength of the He-Ne laser light sources. Thermometer, hygrometer and barometer connected to computer automatically compensate the refractive index of air and the thermal expansion of gauge blocks.

Gauge block comparator - 0.5 - 100 mm | GBCD-100A

Mitutoyo calculation type gauge block automatic check equipment GBCD-100A is used in rectangular gauge blocks ranging from 0.5mm to 100mm for measurement...

Gauge block comparator - 0.5 - 100 mm | GBCD-100A

Mitutoyo calculation type gauge block automatic check equipment GBCD-100A is used in rectangular gauge blocks ranging from 0.5mm to 100mm for measurement of length.

A test block is automatically compared by the device to a suitable reference gauge block. It has a dual-head system, with upper and lower gaging heads, which ensures that the warp of thinner gauge blocks do not have any effect on compensation result.

Its measurement configuration works as standard gauge block with 1 cycle of automatic comparison measurement. The gauge block comparator has a compensation master.

Gauge block comparator - 0.1 - 250 mm | GBCD-250

The Manual Calculation Type Gauge Block Comparator model GBCD-250 manufactured by Mitutoyo features...

Gauge block comparator - 0.1 - 250 mm | GBCD-250

The Manual Calculation Type Gauge Block Comparator model GBCD-250 manufactured by Mitutoyo features a square gauge block highlighting differentiation measurement ability for measuring operations. Furthermore, the device offers distinctive measurement that is separated by its upper and lower computing heads.

Mitutoyo is providing leaflet to its users for more details.
Sartorius AG

Precision weight stainless steel - 1 - 50 mg | YCW series

SARTORIUS individual E1 class wire weights are made with special corrosion-resistant,...

Precision weight stainless steel - 1 - 50 mg | YCW series

SARTORIUS individual E1 class wire weights are made with special corrosion-resistant, non-magnetizable steel, and have a density of 8.0 g/cm3. They are available in weights that range from 1 mg to 500 mg. These wire weights come with a plastic case for protection, also allowing for efficient and comfortable storage.

Precision weight stainless steel - 1 - 50 000 g | YCW series

These special steel individual E2 knob weights are intended for the weighing range...

Precision weight stainless steel - 1 - 50 000 g | YCW series

These special steel individual E2 knob weights are intended for the weighing range from 1g to 50kg. They are highly polished with a very high resistance to corrosion, cannot be magnetized and posses a density of 8.0 g/cm3. Based on their weight (below 20g and over 50g) they are provided in a plastic or wooden case.

Precision weight - 1 - 500 mg | YCW series

The individual F1 OIML class weights can be made from either nickel silver or aluminum. With a density...

Precision weight - 1 - 500 mg | YCW series

The individual F1 OIML class weights can be made from either nickel silver or aluminum. With a density of 2.7 g/cm3, the aluminum leaf weights are available from 1 mg to 5 mg. The nickel silver leaf weights have a density of 8.7 g/cm3 and can be ordered in sizes ranging from 10 mg to 500 mg. Designed by Sartorius, the leaf weights are conveniently packaged in a plastic case for comfortable storage.

Precision weight - 5 000 - 50 000 g | YCW series

Individual M1 weights from 5 kg to 50 kg, material: grey cast, painted black
Schaeffler Technologies GmbH & Co. KG

Feeler gauge -

Schaeffler Feeler gauges are suitable for measurement...

Feeler gauge -

Schaeffler Feeler gauges are suitable for measurement of radial internal clearance. This is particularly suitable when mounted on tapered shaft seats and adaptor and withdrawal sleeves.

Ring gauge - ø 30 - 240 mm | KLR series

Schaeffler taper ring gauges KLR are the easiest way for performing bearing seat inspection on small-sized bearings. The...

Ring gauge - ø 30 - 240 mm | KLR series

Schaeffler taper ring gauges KLR are the easiest way for performing bearing seat inspection on small-sized bearings. The matching of the ring gauge and bearing seat is determined with inking. The machining of bearing seat goes on until the ring gauge gets support across is entire width. The bearing's inner rings are unsuitable and so face a risk of damage while inking.

Taper ring gauges can be found in designs for taper diameters in the range of 30 mm to 240 mm.

Cone meter - ø 27 - 205 mm | MGK133

The taper gauge MKG133 is used for measurement of external tapers 1:12 and 1:30 with a 27mm-205mm diameter and generate less than 1 pm measurement results. The gauge has...

Cone meter - ø 27 - 205 mm | MGK133

The taper gauge MKG133 is used for measurement of external tapers 1:12 and 1:30 with a 27mm-205mm diameter and generate less than 1 pm measurement results. The gauge has two portable measuring brackets: small taper diameter and large taper diameter and there are certain spacing between the measuring bracket. both planes measurements is displayed through the precision indicator of the taper diameter from the nominal value. It is rests on the workpiece with four hardened and polished pins and The stop affixed to either the front or back of the gauge. The position of the gauge on the taper is defined by the pins and a stop. The gauge is determine through the reference taper.
{{item.name}}