+7 (812) 645-08-06
Cone meter - ø 27 - 205 mm | MGK133
The taper gauge MKG133 is used for measurement of external tapers 1:12 and 1:30 with a 27mm-205mm diameter and generate less than 1 pm measurement results. The gauge has two portable measuring brackets: small taper diameter and large taper diameter and there are certain spacing between the measuring bracket. both planes measurements is displayed through the precision indicator of the taper diameter from the nominal value. It is rests on the workpiece with four hardened and polished pins and The stop affixed to either the front or back of the gauge. The position of the gauge on the taper is defined by the pins and a stop. The gauge is determine through the reference taper.