Bore gauges, air plug gauges

select brand


Bocchi

Analog micrometer / bore

Bocchi's Bore Gauges with Hardened Steel Contact Surfaces are generally used for miniature bore-related applications....

Analog micrometer / bore

Bocchi's Bore Gauges with Hardened Steel Contact Surfaces are generally used for miniature bore-related applications. These systems feature hardened steel switchable ogive components, and heat-insulated handles. The travel on the contact surfaces is conveyed by means of needles made out of hardened steel, at a 1:1 ratio.

The Bocchi Bor Gauges were engineered to comply with international DIN 878 standards.
MAHR

Pneumatic plug gauge - 15 - 76 µm | DP 10, 20, 50

Air plug gages are needed for testing cylindrical through bores or blind bores and consists two opposing measuring jets that record the measured value without contact. This helps in diametric roundness and the cylindricity...

Pneumatic plug gauge - 15 - 76 µm | DP 10, 20, 50

Air plug gages are needed for testing cylindrical through bores or blind bores and consists two opposing measuring jets that record the measured value without contact. This helps in diametric roundness and the cylindricity...

Pneumatic plug gauge - ± 0.080, ± 0.040, ± 0.020 mm | µDimensionair II

The µDimensionair II from Mahr is a rugged, durable and affordable air gauging system designed for testing cylindrical through bores or blind bores. It...

Pneumatic plug gauge - ± 0.080, ± 0.040, ± 0.020 mm | µDimensionair II

The µDimensionair II from Mahr is a rugged, durable and affordable air gauging system designed for testing cylindrical through bores or blind bores. It...

Pneumatic plug gauge - S 1840 PE

Mahr's Millimar S 1840 PE is a column amplifier that provides quality performance. It is capable of determining calculations results with one simple view. The product presents a wide array of specifications,...

Pneumatic plug gauge - S 1840 PE

Mahr's Millimar S 1840 PE is a column amplifier that provides quality performance. It is capable of determining calculations results with one simple view. The product presents a wide array of specifications, specifically for integrating signals from both dynamic and static calibrations. These calibration results are displayed on 101 triple-color LEDs that shift color whenever permissible tolerance and warning limitations have been crossed. They change from green to yellow, or straight to red, depending on the corresponding situation.

Aside from the triple-color LEDs, the S 1840 also provides dual-line back-lit LC displays for help text, calibrated measurement, and calculating unit indication. Up to two properties are allowed to be displayed at the same time.

Pneumatic plug gauge - ±0.0040 to ±0.080 mm | 832 Dimensionair

The Digital Dimensionair contains digital and analog displays in a single unit. This stable and reliable system is ideal for manufacturing environments due to its fixed resolution and balanced air system. The exact deviation...

Pneumatic plug gauge - ±0.0040 to ±0.080 mm | 832 Dimensionair

The Digital Dimensionair contains digital and analog displays in a single unit. This stable and reliable system is ideal for manufacturing environments due to its fixed resolution and balanced air system. The exact deviation from zero is displayed on the large, high-contrast digital readout.

The measurement conditions can be seen at a glance on the analog display. The system is precalibrated for correct magnification and only a single master is needed to set it to zero. Resolutions and ranges are available for most air gauge applications, to include 2-, 3-, 4- and 6-jet tooling as well as JetProbes and AirProbes.

It offers dynamics measurement capability and has RS-232 output in order to communicate with a computer, printer or data collector and to permit statistical process control. The master deviation makes the Auto Zero exceptionally accurate in measurement.

Digital display micrometer / bore - 844 D

Mahr Indicating Plug Gages 844 D are useful for quick diameter, circularity and conicity testing of bores. It has been especially designed for batch testing with tight tolerances. The reversal point can be...

Digital display micrometer / bore - 844 D

Mahr Indicating Plug Gages 844 D are useful for quick diameter, circularity and conicity testing of bores. It has been especially designed for batch testing with tight tolerances. The reversal point can be determined without any rocking in the bore. It is perfect for use along with a digital indicating instrument as well as subsequent measured value processing.

A hardened guide cylinder with hard chromium-plating and carbide-tipped anvils are included in the measuring head. The radial movement is sent to the indicating instrument by the carbide expanding pin. The integrated spring provides a constant measuring force, and also removes user influence.

The 844 D comprehensive modular system includes measuring head, holder, right angle attachments, extension for depth, and depth stops.
SUNNEN

Analog micrometer / bore - ø 13.71 - 152.4 mm

Sunnen Dial Bore Gauges are easy, accurate and fast items. They can be used to read out 0.002, as they feature all-carbide gauging points, along with adjustable...

Analog micrometer / bore - ø 13.71 - 152.4 mm

Sunnen Dial Bore Gauges are easy, accurate and fast items. They can be used to read out 0.002, as they feature all-carbide gauging points, along with adjustable centralizers and wear-proof ball cranks. Note that each of these items comes packed in its sturdy box, with tools and wrenches required for adjustment and setup.

In terms of the machine specifications, these items are available to cover diameters from .054 to 6 (13.71 to 152.4mm in the metric system), as well as an option of 12 diameters (309mm). Note that all the digital models are available with dual readouts in increments of both .0001 and 0.001mm.

Bore micrometer / digital display

The Sunnen's Electric dial bore gages are accessible in a variety of models to fit the varying requirements needed for each unique application....

Bore micrometer / digital display

The Sunnen's Electric dial bore gages are accessible in a variety of models to fit the varying requirements needed for each unique application. The product features 0.00012 readout accuracy, 0.0001 in. (0,001 mm) metric/ inch conversion and a go/no function, thus providing optimum performance and reliability.

This top of the line device under normal usage can operate for 5,000 hour and with an LCD display mounted incorporated with direct data cable connection into your PC, users can easily interpret and analyze the gathered data.
{{item.name}}