+7 (812) 645-08-06
Data loggers: Shock, vibration, fleet management
select brand
GPS vehicle fleet tracking system - HCP Roadstar
HCP Roadstar is tracking terminal based on GPS/GPRS technology. This is fast and cost-saving solution for vehicle tracking, personal emergency call systems, fleet management and navigation systems.
GENERAL FEATURES
Robust industrial housing
Dimensions: 78 x 54 x 26mm
Weight approx. 170gr
Operating temperature range: -40 to 85C
INTERFACES
SMA...
GENERAL FEATURES
Robust industrial housing
Dimensions: 78 x 54 x 26mm
Weight approx. 170gr
Operating temperature range: -40 to 85C
INTERFACES
SMA...
GPS vehicle fleet tracking system - HCP Roadstar
HCP Roadstar is tracking terminal based on GPS/GPRS technology. This is fast and cost-saving solution for vehicle tracking, personal emergency call systems, fleet management and navigation systems.
GENERAL FEATURES
Robust industrial housing
Dimensions: 78 x 54 x 26mm
Weight approx. 170gr
Operating temperature range: -40 to 85C
INTERFACES
SMA antenna connector for GPS
SMA antenna connector for GSM
Mini USB B type
Molex Micro-fit 10-pin connector
LED
GPS FEATURES
On board RTC Crystal for faster warm and hot starts
Antenna supervisor
U-blox 6 GPS engine:
Navigate down to -160 dBm and -147 dBm coldstart
Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS)
Anti-jamming technology
Based on AEC-Q100 qualified chips
Receiver performance data:
Receiver type 50-channel u-blox engine
GPS L1 C/A code
Galileo L1 open service (with upgrade)
SBAS: WAAS, EGNOS, MSAS
Accuracy Position 2,5 m CEP
SBAS 2.0 m CEP
Acquisition Cold starts: 27 s
Aided starts <3 s
Hot starts: 1 s
Sensitivity Tracking: -162 dBm
Cold starts: -147 dBm
Hot starts: -156 dBm
Option. limits Velocity: 500 m/s
Altitude: 50.000 m
GENERAL FEATURES
Robust industrial housing
Dimensions: 78 x 54 x 26mm
Weight approx. 170gr
Operating temperature range: -40 to 85C
INTERFACES
SMA antenna connector for GPS
SMA antenna connector for GSM
Mini USB B type
Molex Micro-fit 10-pin connector
LED
GPS FEATURES
On board RTC Crystal for faster warm and hot starts
Antenna supervisor
U-blox 6 GPS engine:
Navigate down to -160 dBm and -147 dBm coldstart
Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS)
Anti-jamming technology
Based on AEC-Q100 qualified chips
Receiver performance data:
Receiver type 50-channel u-blox engine
GPS L1 C/A code
Galileo L1 open service (with upgrade)
SBAS: WAAS, EGNOS, MSAS
Accuracy Position 2,5 m CEP
SBAS 2.0 m CEP
Acquisition Cold starts: 27 s
Aided starts <3 s
Hot starts: 1 s
Sensitivity Tracking: -162 dBm
Cold starts: -147 dBm
Hot starts: -156 dBm
Option. limits Velocity: 500 m/s
Altitude: 50.000 m
Vehicle fleet management data-logger - FLEETlog
Fleet Data Logger for Automotive Testing, Real Time OS
4 CAN inputs, 2 Digital I/Os
WakeOnCAN supported...
4 CAN inputs, 2 Digital I/Os
WakeOnCAN supported...
Vehicle fleet management data-logger - FLEETlog
Fleet Data Logger for Automotive Testing, Real Time OS
4 CAN inputs, 2 Digital I/Os
WakeOnCAN supported on all CAN inputs
Data storage on a removable compact flash card (cF)
Complete galvanic isolation (inputs, power supply, enclosure)
Configuration with IPEmotion
Data streaming to IPEmotion, ETAS INCA, Vector CANape via CAN or XCPonETH
GPS and wireless conection via WiFi onboard (STD, WAN)
Wireless conection via 3G onboard (WAN)
4 CAN inputs, 2 Digital I/Os
WakeOnCAN supported on all CAN inputs
Data storage on a removable compact flash card (cF)
Complete galvanic isolation (inputs, power supply, enclosure)
Configuration with IPEmotion
Data streaming to IPEmotion, ETAS INCA, Vector CANape via CAN or XCPonETH
GPS and wireless conection via WiFi onboard (STD, WAN)
Wireless conection via 3G onboard (WAN)
Vibration data-logger - Vibration v6
Data window: one second duration, updated every second
Low pass data filtering: none, or user-specified...
Low pass data filtering: none, or user-specified...
Vibration data-logger - Vibration v6
Data window: one second duration, updated every second
Low pass data filtering: none, or user-specified (discrete waveform only) cutoff frequencies
Multiple waveform analyses:
All waveforms: Peak G, Frequency
Discrete waveform: Peak G, Transmissibility
Random waveform: PSD, PSD Transmissibility
View raw data and analysis simultaneously
Low pass data filtering: none, or user-specified (discrete waveform only) cutoff frequencies
Multiple waveform analyses:
All waveforms: Peak G, Frequency
Discrete waveform: Peak G, Transmissibility
Random waveform: PSD, PSD Transmissibility
View raw data and analysis simultaneously
Shock data-logger / vibration - EDR-3C, EDR-3D series
The EDR-3C is a portable impact, shock and vibration logger, recorder and detector combo unit and has a built-in triaxial accelerometer thats designed to measure shock, vibration, temperature and (as an option) humidity, pressure, or resistance-bridge devices. The programmable unit tags all acceleration...
Shock data-logger / vibration - EDR-3C, EDR-3D series
The EDR-3C is a portable impact, shock and vibration logger, recorder and detector combo unit and has a built-in triaxial accelerometer thats designed to measure shock, vibration, temperature and (as an option) humidity, pressure, or resistance-bridge devices. The programmable unit tags all acceleration events with a time and date to provide a time history of the dynamic environment experienced during a recording session.
The EDR-3C series impact, shock and vibration combo recorders offer you a time-tested reputation for proven performance and reliability with hundreds of successful installations since 1989. The EDR-3C series operates similarly and differs only in programmability features, on-board memory and channel capacities. Each impact, shock and vibration combo recorder is powered by a specially designed C-Cell battery pack (9 Volt optional.)
The EDR-3C impact, shock and vibration combo recorder is used in conjunction with DynaMax programs and downloads the EDR-3C's memory via an IBM compatible personal computer using serial & USB. Together, the EDR-3C and the DynaMax software program provide a powerful tool for accurately recording and analyzing dynamic environments.
The EDR-3C series impact, shock and vibration combo recorders offer you a time-tested reputation for proven performance and reliability with hundreds of successful installations since 1989. The EDR-3C series operates similarly and differs only in programmability features, on-board memory and channel capacities. Each impact, shock and vibration combo recorder is powered by a specially designed C-Cell battery pack (9 Volt optional.)
The EDR-3C impact, shock and vibration combo recorder is used in conjunction with DynaMax programs and downloads the EDR-3C's memory via an IBM compatible personal computer using serial & USB. Together, the EDR-3C and the DynaMax software program provide a powerful tool for accurately recording and analyzing dynamic environments.