+7 (812) 645-08-06
Rotary paddle level switches
select brand
Rotary paddle level switch / fail-safe - max. 3 bar | NIVOROTA
This fail safe rotary paddle level switch has a long life-expectancy and motor shut-off mechanism. Its equipped with a flexible coupling...
Rotary paddle level switch / fail-safe - max. 3 bar | NIVOROTA
This fail safe rotary paddle level switch has a long life-expectancy and motor shut-off mechanism. Its equipped with a flexible coupling...
Rotary paddle level switch - Rotating Paddle Pulsarpoint 300
Pulsarpoint 300 is a rotating paddle level switch for level measurement and switching on mass solids. The paddle's rotation is interfered when...
Rotary paddle level switch - Rotating Paddle Pulsarpoint 300
Pulsarpoint 300 is a rotating paddle level switch for level measurement and switching on mass solids. The paddle's rotation is interfered when material achieves the paddle, letting a clutch to separate the engine. This may be utilized to imply a material level as being high, halfway or low relying upon configuration picked. The Pulsarpoint 300 uses a polycarbonate casing, fixed to Ip66. The procedure association is of the same material, with a polypropylene dual cutting edge paddle as standard which could be effortlessly changed over to one sharpened steel.
Rotary paddle level switch - Rotating Paddle Pulsarpoint 310
The Pulsarpoint 310 is ideally designed to provide a good quality performance and functionality for very specific purposes and applications. It is also built...
Rotary paddle level switch - Rotating Paddle Pulsarpoint 310
The Pulsarpoint 310 is ideally designed to provide a good quality performance and functionality for very specific purposes and applications. It is also built to meet the needs and standards of the users and operators. The rotating paddle level switch is mainly used for level measurement and switching on bulk solids. The circulation of the paddle immediately stops once the material reaches the paddle which causes a clutch in the motor which then initiate a relay to enable an alarm signal to be switched on. This may be in particular be used to determine a material as a high, medium or low depending on the chosen action.
Rotary paddle level switch - 200 °C, 1,1 bar, ATEX | PFG05/ATF
The PFG05/ATF by Riels Instruments is a rotary paddle level switch which is designed for applications that have superior temperature condition. This...
Rotary paddle level switch - 200 °C, 1,1 bar, ATEX | PFG05/ATF
The PFG05/ATF by Riels Instruments is a rotary paddle level switch which is designed for applications that have superior temperature condition. This is the measuring device that suits to operation that uses solid pulverulent and granular. This tool detects different level of data such as minimum, medium and maximum. For durability porpuses, all components are made with stainless steel. Using this equipment, it enhances measuring probe of the system which provides greater resistance against rotation. Plus, it has an advantage of good repeatability and does not require calibration.
Rotary paddle level switch - 2"1/2, 70 °C, 1,1 bar, ATEX | PFG86
The PFG86 is a rotary paddle level switch designed to measure the levels of solid. It is constructed with a robust design perfect for dangerous operating conditions which has requirement...
Rotary paddle level switch - 2"1/2, 70 °C, 1,1 bar, ATEX | PFG86
The PFG86 is a rotary paddle level switch designed to measure the levels of solid. It is constructed with a robust design perfect for dangerous operating conditions which has requirement for continuous rhythms. It is capable of detecting solid levels through controlling propeller's rotation which is placed in the tank and drove by a synchronous motor. The propeller is capable of rotating when there is no material detected while when there is a material present the propeller rotates to switch working contact. Second contact shuts down the motor's supply voltage. Falling of product level the propeller is released while the motor is powered ready for operation. This switch is calibration free, highly repeat able and low cost.
Rotary paddle level switch - 1"1/2, ATEX | PFG57
The PFG57 is manufactured by Riels Instruments. It is a small rotary level indicator, and its small size makes it suitable for mounting...
Rotary paddle level switch - 1"1/2, ATEX | PFG57
The PFG57 is manufactured by Riels Instruments. It is a small rotary level indicator, and its small size makes it suitable for mounting on small tanks or cell disposing. It is a measuring device ideal for powdery or granular solid, and it detects only level states, such as minimum, medium and maximum.
The gauge can be supplied with extension, with or without protection, and a desired length depending on the customer when ordering. The PFG57 does not require calibration and has positive repeatability.
The gauge can be supplied with extension, with or without protection, and a desired length depending on the customer when ordering. The PFG57 does not require calibration and has positive repeatability.