+7 (812) 645-08-06
Total hydrocarbon analyzers (THC)
select brand
Hydrocarbon analyzer - max. 500 ppm | AroSpector
The Thermo Scientific AroSpector™ Hydrocarbons-in-Water Monitor can promptly notify operators when there are detected hydrocarbons...
Hydrocarbon analyzer - max. 500 ppm | AroSpector
The Thermo Scientific AroSpector™ Hydrocarbons-in-Water Monitor can promptly notify operators when there are detected hydrocarbons containing aromatic compounds. Its cleaning cycle can be configured depending on the condition of the samples to optimize uptime. Also, the analysis cycle is also configurable with a minimum cycle period of 15 s, and it features an over-range alarm that alerts operators whenever corrective measures are needed. Moreover, its no plug, no pyrolysis feature also minimizes maintenance.
Total hydrocarbon analyzer / FID - max. 10 ppm, 40 - 80 l/h | EuroFID3010
The total hydrocarbon analyzer by SICK is recognized internationally because of its...
Total hydrocarbon analyzer / FID - max. 10 ppm, 40 - 80 l/h | EuroFID3010
The total hydrocarbon analyzer by SICK is recognized internationally because of its durability. It does not have any moving parts which means it is wear-resistant. It has EC type approval as gas warning device in accordance to 94/9/EC which guarantees its safety. This state-of-the-art technology also has optimum detector geometry.
Total hydrocarbon analyzer / portable - max. 100 000 ppm, max. 70 l/h | FID3006
The FID3006 analyzer only requires at most 15 minutes warm up time to be ready. It features automated...
Total hydrocarbon analyzer / portable - max. 100 000 ppm, max. 70 l/h | FID3006
The FID3006 analyzer only requires at most 15 minutes warm up time to be ready. It features automated switch-off of fuel gas and pump in case of flame failure and it is approved for continuous emission checking. It also has a supporting frame with the needed gases in little cylinders, uses bayonette latches for quick connectors, and it has integrated temperature controller.
Total hydrocarbon analyzer / FID - max. 62.000 ppm, max. 120 l/h | GMS800 FIDOR
The GMS810-FIDOR is particularly suitable for monitoring emissions according to regulatory requirements, such as in cement and/or power plants and in waste incinerators. As part of the innovative GMS800 analyzer family and based on the proven flame ionization measuring principle, the GMS810-FIDOR...
Total hydrocarbon analyzer / FID - max. 62.000 ppm, max. 120 l/h | GMS800 FIDOR
The GMS810-FIDOR is particularly suitable for monitoring emissions according to regulatory requirements, such as in cement and/or power plants and in waste incinerators. As part of the innovative GMS800 analyzer family and based on the proven flame ionization measuring principle, the GMS810-FIDOR can measure total organic hydrocarbon concentrations in gases, both at high concentration levels and in trace levels.
Integration into existing systems is easy due to the 19"-rack enclosure, such as in the multi-component analysis system MCS100E HW from SICK. This standard 19" enclosure provides easy integration into all industry-typical systems. The ejector pump which is used to deliver sample gas to the analyzer is maintenance free. Exceptionally clean zero gas can be provided by the optional integrated catalytic converter.
The GMS810-FIDOR provides automatic compensation and regulation of process pressure fluctuations and has a protective filter at the sample gas inlet. The device provides 2% or less variation to give high linearity whatever the measuring range. It can also provide continuous monitoring of hydrocarbon emissions in raw and clean gas.
Integration into existing systems is easy due to the 19"-rack enclosure, such as in the multi-component analysis system MCS100E HW from SICK. This standard 19" enclosure provides easy integration into all industry-typical systems. The ejector pump which is used to deliver sample gas to the analyzer is maintenance free. Exceptionally clean zero gas can be provided by the optional integrated catalytic converter.
The GMS810-FIDOR provides automatic compensation and regulation of process pressure fluctuations and has a protective filter at the sample gas inlet. The device provides 2% or less variation to give high linearity whatever the measuring range. It can also provide continuous monitoring of hydrocarbon emissions in raw and clean gas.
Hydrocarbon analyzer - Nova Pro
The AGC Nova Pro Hydrocarbon analyzer is specialized for the continuous analysis of gas streams.