+7 (812) 645-08-06
Electrical calculation and CAD software
select brand
Low-voltage electrical installation software - NFC 15-100, BS, RGIE, IEC364, HD384, VDE | Caneco BT
Caneco BT is designed to deliver extremely convenient automation solutions for graphing, plotting and diagramming cross-sections of devices that operate at low voltages. The unit...
Low-voltage electrical installation software - NFC 15-100, BS, RGIE, IEC364, HD384, VDE | Caneco BT
Caneco BT is designed to deliver extremely convenient automation solutions for graphing, plotting and diagramming cross-sections of devices that operate at low voltages. The unit is highly cost-efficient and efficient. It provides extremely precise diagrammatic data and information for conceptualizing and realizing electrical applications. It also provides blue-prints for testing and maintaining of manufactured devices.
The company is a trailblazer in its field in the European Union and is the proud owner of NF C 15-100, RGIE and BS certifications. The certifications re-confirm the effectiveness and quality of the unit. The unit has international compliance of IEC364, VDE, HD384.
The company is a trailblazer in its field in the European Union and is the proud owner of NF C 15-100, RGIE and BS certifications. The certifications re-confirm the effectiveness and quality of the unit. The unit has international compliance of IEC364, VDE, HD384.
Calculation and schematics software for high-voltage installations - < 245 kV, NFC 13-200, IEC 60909 | Caneco HT
Software for Calculations and Diagrams of High Voltage Electrical Installations
Caneco HT is a high voltage private...
Caneco HT is a high voltage private...
Calculation and schematics software for high-voltage installations - < 245 kV, NFC 13-200, IEC 60909 | Caneco HT
Software for Calculations and Diagrams of High Voltage Electrical Installations
Caneco HT is a high voltage private electrical network design and verification software package compliant with standards NF C 13-200 and IEC 60909 and with its Marine pack standard IEC 61363.
It calculates the three-phase and homopolar and determines the cross-sections of the cables.
It enables adjustment of the protective devices for several working configurations.
Caneco HT is a high voltage private electrical network design and verification software package compliant with standards NF C 13-200 and IEC 60909 and with its Marine pack standard IEC 61363.
It calculates the three-phase and homopolar and determines the cross-sections of the cables.
It enables adjustment of the protective devices for several working configurations.
Electrical installation quotation software with automatic layout - Office ELEC
Office ELEC offers the best software solution for quotations, invoicing, order and monitoring of electrical installation of projects. Users are allowed to figure up automatically and then order the equipment that is prepared in Caneco software. It is one of the best softwares in the price...
Electrical installation quotation software with automatic layout - Office ELEC
Office ELEC offers the best software solution for quotations, invoicing, order and monitoring of electrical installation of projects. Users are allowed to figure up automatically and then order the equipment that is prepared in Caneco software. It is one of the best softwares in the price list of EDIELEC manufacturers and electronic catalogue.
The price quotations Management Edition Automatic calculation is ideal for the price of the equipment as well as the cost of labor. The Equipment Management Equipment nomenclature shows that it is made of several components. Our Management Orders realized by drag & drop. The equipment nomenclatures show that the component nomenclatures is sorted by manufacturers and / or chapters, and / or equipment.
The printings and nomenclatures rows customization shows nomenclatures, price quotations. Import Export OPTIONAL MODULE, COMPLEMENTARY SOFTWARES includes Electronic technical catalog EDIELEC Equipment Technical Choice (ETC) software. The automatic quotation of Caneco BT project Caneco Implementation project Caneco Cabinet Project Equipment lists from Excel.
The price quotations Management Edition Automatic calculation is ideal for the price of the equipment as well as the cost of labor. The Equipment Management Equipment nomenclature shows that it is made of several components. Our Management Orders realized by drag & drop. The equipment nomenclatures show that the component nomenclatures is sorted by manufacturers and / or chapters, and / or equipment.
The printings and nomenclatures rows customization shows nomenclatures, price quotations. Import Export OPTIONAL MODULE, COMPLEMENTARY SOFTWARES includes Electronic technical catalog EDIELEC Equipment Technical Choice (ETC) software. The automatic quotation of Caneco BT project Caneco Implementation project Caneco Cabinet Project Equipment lists from Excel.
BIM software / for electrical system design - Caneco Implantation
Caneco Implantation is an AutoCAD® application for the automatic layout and implantation of electrical devices for cables in 3D or 2D. It can be used for co-ordination with Caneco BT or as a stand-alone for making single-lien diagrams and calculations....
BIM software / for electrical system design - Caneco Implantation
Caneco Implantation is an AutoCAD® application for the automatic layout and implantation of electrical devices for cables in 3D or 2D. It can be used for co-ordination with Caneco BT or as a stand-alone for making single-lien diagrams and calculations....
Outdoor lighting electrical calculation software - NFC 17-200, UTE C17-205 | Caneco EP
ALPI's Caneco EP is an audit and design system solution used in exterior lighting systems. The software conforms with standards NF C 17-200...
Outdoor lighting electrical calculation software - NFC 17-200, UTE C17-205 | Caneco EP
ALPI's Caneco EP is an audit and design system solution used in exterior lighting systems. The software conforms with standards NF C 17-200 (July 2008 version), and UTE Guide C17-205.
The system is designed for controlling low and high voltage in public lighting applications, ensuring the lowest possible installation cost. It does not only calculate voltage drops, but also performs the dimensioning of the installation completely.
The Caneco EP features an Implantation module that integrates the data to the system.
The system is designed for controlling low and high voltage in public lighting applications, ensuring the lowest possible installation cost. It does not only calculate voltage drops, but also performs the dimensioning of the installation completely.
The Caneco EP features an Implantation module that integrates the data to the system.
Electric CAD software - EB Electrical
The EB Electrical from Aucotec is an Engineering Base application equipped with an XLS Configurator, providing a path to automatic document preparation. It is also integrated with general diagrams and a cable...
Electric CAD software - EB Electrical
The EB Electrical from Aucotec is an Engineering Base application equipped with an XLS Configurator, providing a path to automatic document preparation. It is also integrated with general diagrams and a cable run design. This enables the system to serve in route planning with cable routing and length determination, automatic determination of assembly materials, and single-line representation. This tool features a pre-calculation mode that prepares the specifications requested.
This tool provides PLC Wizards bus design with PLC addressing and PLC assignment, which prevents errors due to multiple entries by using efficient wizards for control configuration. This device is supported by automated manufacturing of mounting plates, label generation, wire setting and bundling, as well as 3-D interfacing.
This tool provides PLC Wizards bus design with PLC addressing and PLC assignment, which prevents errors due to multiple entries by using efficient wizards for control configuration. This device is supported by automated manufacturing of mounting plates, label generation, wire setting and bundling, as well as 3-D interfacing.
Electrical diagram software / instrument schematics - EB Instrumentation
The Engineering Based (EB) Instrumentation is a software made for design and documentation of electrical control systems. It is manufactured by Aucotec., with P&ID Editing suitable...
Electrical diagram software / instrument schematics - EB Instrumentation
The Engineering Based (EB) Instrumentation is a software made for design and documentation of electrical control systems. It is manufactured by Aucotec., with P&ID Editing suitable for preliminary planning in process engineering and instrumentation.
The instrumentation is used for route planning with cable routing and length measurements. It permits extensive time usage, and is cost-efficient for the preparation of needed cable laying.
The EB Instrumentation provides an option to record all preliminary planning tasks on-schedule, and to access the tasks in detail engineering without losing information. Moreover, it provides planning of the needed total assembly documentation.
The instrumentation is used for route planning with cable routing and length measurements. It permits extensive time usage, and is cost-efficient for the preparation of needed cable laying.
The EB Instrumentation provides an option to record all preliminary planning tasks on-schedule, and to access the tasks in detail engineering without losing information. Moreover, it provides planning of the needed total assembly documentation.
Electric CAD software / for wiring harnesses design - EB Cable
The EB cable by Aucotec is software which comes in a complete system overview to wiring harness details. The unit comes with particular base cables coming to its database because confusion from wide database...
Electric CAD software / for wiring harnesses design - EB Cable
The EB cable by Aucotec is software which comes in a complete system overview to wiring harness details. The unit comes with particular base cables coming to its database because confusion from wide database may happen due to connection may represent a lot of documentation. The software is able to locate topological situation in these devices and also angle vision for most plugs and cables. The planning starts with the functional block diagram which can be immediately seen and appear in the data model function section. The next stage is the physical block diagram which are respectively display harnesses upon wiring that are connected to them. Plus, a wiring plan can be configured and detailed in the wiring diagram. Using this, it increases the reliability of the user's system when it comes to centralized database system.
Electric CAD software - EB Power
The EB power by Autotec is a software designed for projecting energy distribution facilities. Using this software, the user is now able to conceptualized his own plant design in advanced. For easy planning,...
Electric CAD software - EB Power
The EB power by Autotec is a software designed for projecting energy distribution facilities. Using this software, the user is now able to conceptualized his own plant design in advanced. For easy planning, the software comes with single-line diagram of the fields and overview display of the locations and cables. In 2009, a new version of the software is created having an automated projecting by means of detailed planning which includes documentation. Also, the software is supported with data model engineering base enabling it to perform with devices having a superior voltage and and switch gear. Generation of document with these type of software comes with a specific documentation which the resources are scheduled. This is the best solution software when it comes to projecting a job immediately.
Electrical schematics software - ELCAD
Aucotec's ELCAD is an engineering system for electrical CAD design and documentation. It is designed for electro-mechanical engineering and plant construction.
The engineering system provides a complete solution for planning,...
The engineering system provides a complete solution for planning,...
Electrical schematics software - ELCAD
Aucotec's ELCAD is an engineering system for electrical CAD design and documentation. It is designed for electro-mechanical engineering and plant construction.
The engineering system provides a complete solution for planning, construction, operation and maintenance of electrical plants from a wide range of industries. It ensures high flexibility and adaptability to special labeling instructions, engineering processes and documentation regulations.
ELCAD is compliant with the international standards, and can be acquired in versions with different languages from Aucotec's global partner network. It also works with the E-engineering systems' market leaders, and has various references from its worldwide user network including the leading companies within their sector. Furthermore, the system supports current trends and technologies like database-driven engineering and object oriented modular design.
The engineering system provides a complete solution for planning, construction, operation and maintenance of electrical plants from a wide range of industries. It ensures high flexibility and adaptability to special labeling instructions, engineering processes and documentation regulations.
ELCAD is compliant with the international standards, and can be acquired in versions with different languages from Aucotec's global partner network. It also works with the E-engineering systems' market leaders, and has various references from its worldwide user network including the leading companies within their sector. Furthermore, the system supports current trends and technologies like database-driven engineering and object oriented modular design.
