+7 (812) 645-08-06
Mechanical seals
select brand
Spring mechanical seal / cone - MTM10-11
The MTM10-11 is a conical spring mechanical seal developed by Microtem. It is mainly used for general services machinery at low and medium pressure. This unbalanced mechanical...
Spring mechanical seal / cone - MTM10-11
The MTM10-11 is a conical spring mechanical seal developed by Microtem. It is mainly used for general services machinery at low and medium pressure. This unbalanced mechanical seal is constructed with compliance to DIN* directive requirements.
It standard contact surfaces is built from stainless Steel304, stainless Steel316, tungsten carbide, carbographite impregnated with antimony, or carbographite impregnated with resin.
The elastomer is also developed from FPM/Viton, EPDM, NBR, or silicon construction. In addition, this tool is equipped with elastomer stationary ring, stationary ring, rotary ring, elastomer rotary ring, and spring components.
It standard contact surfaces is built from stainless Steel304, stainless Steel316, tungsten carbide, carbographite impregnated with antimony, or carbographite impregnated with resin.
The elastomer is also developed from FPM/Viton, EPDM, NBR, or silicon construction. In addition, this tool is equipped with elastomer stationary ring, stationary ring, rotary ring, elastomer rotary ring, and spring components.
Spring mechanical seal / cone - MTM 15
The MTM 15, manufactured by Microtem, is a series of conical springs that are used for general services machinery at low and medium pressure. They...
Spring mechanical seal / cone - MTM 15
The MTM 15, manufactured by Microtem, is a series of conical springs that are used for general services machinery at low and medium pressure. They...
Spring mechanical seal / cone - MTM 25_26
The MTM 25_26, manufactured by MICROTEM, is a conical spring mechanical seal that can compensate positioning errors and withstand stresses created by vibrations. The...
Spring mechanical seal / cone - MTM 25_26
The MTM 25_26, manufactured by MICROTEM, is a conical spring mechanical seal that can compensate positioning errors and withstand stresses created by vibrations. The contact surface can be made with silicon carbide, aluminum oxide, tungsten carbide and carbographite. The elastomer materials are NBR, EPDM and FPM/VITON.
This device features a stationary ring, a rotary ring insert, an elastomer stationary ring, an elastomer rotary ring and a spring. It can be made with graphite, silicon carbide or tungsten carbide. Other construction materials include Nbr, Viton, EPDM as well as 304 and 316 stainless steel. The spring is made of stainless steel.
This device features a stationary ring, a rotary ring insert, an elastomer stationary ring, an elastomer rotary ring and a spring. It can be made with graphite, silicon carbide or tungsten carbide. Other construction materials include Nbr, Viton, EPDM as well as 304 and 316 stainless steel. The spring is made of stainless steel.
Spring mechanical seal / cylindrical - MTM 30
Cylindrical spring mechanical seal used in refinery processing and petrochemical industry are differently designed depending on rotation direction. According to DIN 24960 standards are available in different materials. Standard contact...
Spring mechanical seal / cylindrical - MTM 30
Cylindrical spring mechanical seal used in refinery processing and petrochemical industry are differently designed depending on rotation direction. According to DIN 24960 standards are available in different materials. Standard contact...
Spring mechanical seal / cylindrical - MTM 4X series
The MTM 4X series offers a wide array of cylindrical spring mechanical seals that are characterized by their double-directional and single-cylindrical structure. Theses mechanical seals...
Spring mechanical seal / cylindrical - MTM 4X series
The MTM 4X series offers a wide array of cylindrical spring mechanical seals that are characterized by their double-directional and single-cylindrical structure. Theses mechanical seals are integrated with elastomer bellows and are typically used in all general services machinery possessing low and medium pressure. They are designed in accordance to DIN 24960 standards and are fabricated from either nitrile rubber, viton, graphite, silicon carbide or tungsten carbide to name a few.
These springs consist of an elastomer stationary ring, a stationary ring, a rotary ring, an elastomer rotary ring and a spring. They are compatible with surfaces composed of either Aluminum oxide and 316-grade Stainless Steel.
These springs consist of an elastomer stationary ring, a stationary ring, a rotary ring, an elastomer rotary ring and a spring. They are compatible with surfaces composed of either Aluminum oxide and 316-grade Stainless Steel.
Split mechanical seal - 25mm - 125mm | 442C
The Chesterton® 442C Cartridge Split Mechanical Seal uses the split seal technology which is a latest innovation. It is easy to install the cartridge split seal and there is the possibility of removing the problem...
Split mechanical seal - 25mm - 125mm | 442C
The Chesterton® 442C Cartridge Split Mechanical Seal uses the split seal technology which is a latest innovation. It is easy to install the cartridge split seal and there is the possibility of removing the problem...
Dual-cartridge mechanical seal - 25 - 120 mm | 250
The 250 type is a dual-cartridge mechanical seal that is ideally used in...
Dual-cartridge mechanical seal - 25 - 120 mm | 250
The 250 type is a dual-cartridge mechanical seal that is ideally used in preventing wasteful leakage, shaft fretting damage and unproductive downtime. This mechanical seal is specifically constructed for baseline operations and in for the upgrade of packed and component sealed materials.
Cartridge mechanical seal - -30 - 260 ºC, 25 - 125 mm | 150
The Cartridge Single Seal 150 is a general purpose seal designed to minimize high-maintenance...
Cartridge mechanical seal - -30 - 260 ºC, 25 - 125 mm | 150
The Cartridge Single Seal 150 is a general purpose seal designed to minimize high-maintenance requirements and inhibits unwanted leakage. It also prevents inefficient downtime and shaft fretting damages. This seal is manufactured for baseline processes and is also suitable for enhancing packaged or component-sealed machine.
Dual-cartridge mechanical seal / heavy-duty - max. 260 °C | S20
The S20 Cassette Dual Seal are designed to streamline inventories and seal selections....
Dual-cartridge mechanical seal / heavy-duty - max. 260 °C | S20
The S20 Cassette Dual Seal are designed to streamline inventories and seal selections. Also, it functions by reducing the complications of installation processes and by decreasing the total maintenance cost. This cassette seal has an average pressure rating of 31 bar and a shaft speed that reaches 25 m/sec or 5,000 FPM.
Cartridge mechanical seal / heavy-duty - ø 25 - 120 mm, max. 260 °C | S10
The S10 belongs in the S series developed by A.W. Chesterton Company. It is a heavy...
Cartridge mechanical seal / heavy-duty - ø 25 - 120 mm, max. 260 °C | S10
The S10 belongs in the S series developed by A.W. Chesterton Company. It is a heavy duty dual cartridge mechanical seal which is engineered to meet the majority of plant wide applications with great reliability in service. The seal exceeds the basic fluid sealing to cater the economies of total sealing workflow.
Multiple-spring mechanical seal - ø 16 - 100 mm | TG59B
The TG59B is a multiple-spring mechanical seal, manufactured by WenZhou TianGu Seal Co.,Ltd. This product...
Multiple-spring mechanical seal - ø 16 - 100 mm | TG59B
The TG59B is a multiple-spring mechanical seal, manufactured by WenZhou TianGu Seal Co.,Ltd. This product is constructed out of carbon, silicon condibe, mickel bonded WC, including 99% ceramic and Cr-Ni-Mo steel. The spring and metal parts are both made from SUS304/SUS316.
This TG59B can operate with pressure ranging from 0 - 5.2 MPa, maximum temperature of 200 ℃ and velocity of Vg ≤ 25m/s.
This TG59B can operate with pressure ranging from 0 - 5.2 MPa, maximum temperature of 200 ℃ and velocity of Vg ≤ 25m/s.
Spring mechanical seal / blade - ø 16 - 100 mm | TG71U
The TG71U is a leaf spring mechanical seal, manufactured by WenZhou TianGu Seal Co.,Ltd. This product...
Spring mechanical seal / blade - ø 16 - 100 mm | TG71U
The TG71U is a leaf spring mechanical seal, manufactured by WenZhou TianGu Seal Co.,Ltd. This product is constructed out of carbon, silicon condibe, Cr-Ni-Mo steel, including 99% ceramic and Viton. The spring and metal parts are both made from SUS304/SUS316.
This TG59B can operate with pressure ranging from 0 - 1.6 MPa, maximum temperature of 200 ℃ and velocity of Vg ≤ 20m/s.
This TG59B can operate with pressure ranging from 0 - 1.6 MPa, maximum temperature of 200 ℃ and velocity of Vg ≤ 20m/s.
Multiple-spring mechanical seal - ø 18 - 100 mm | TG59U
The TG59U Model is a multiple-spring mechanical seal developed by TNG Mechanical Seal. It is supplied with...
Multiple-spring mechanical seal - ø 18 - 100 mm | TG59U
The TG59U Model is a multiple-spring mechanical seal developed by TNG Mechanical Seal. It is supplied with Vg≤25 m/s velocity, and 0 to 1.7 MPa pressure. The rotary face is built with carbon, silicon conbide, or mickel bonded WC materials. Its auxiliary seat is also engineered from Viton, EPDM, or PTFE Enwarp Viton components. In addition, the framework can withstand a working temperature of -40 ℃ to 200 ℃.
Spring mechanical seal - ø 16 - 120 mm | TGJB104
The TGJB104 Model is a single-spring mechanical seal developed by TNG Mechanical Seal. It is supplied...
Spring mechanical seal - ø 16 - 120 mm | TGJB104
The TGJB104 Model is a single-spring mechanical seal developed by TNG Mechanical Seal. It is supplied with Vg≤10 m/s velocity, and 0 to 0.8 MPa pressure. The rotary face is built with Silicon Conbide, or Nickel Bonded WC materials. Its auxiliary seat is also engineered from Viton, NBR, PRFE, or EPDM components. In addition, the framework can withstand a working temperature of -20 ℃ to 80 ℃.
Spring mechanical seal / cone - ø 10 - 40 mm | TG155
The TG155 is designed with a ceramic or silicone conbide rotary face. The unit's stationary...
Spring mechanical seal / cone - ø 10 - 40 mm | TG155
The TG155 is designed with a ceramic or silicone conbide rotary face. The unit's stationary seat is constructed from either carbon or silicone conbide components. Also, the auxiliary seal is made from VITON, EPDM and NBR materials.
The device functions in an operating temperature of -40 ℃ up to 180 ℃, and maximum pressure of 1.4 MPa.
The device functions in an operating temperature of -40 ℃ up to 180 ℃, and maximum pressure of 1.4 MPa.