Lathe manual chucks

select brand


SCHUNK

Clamp chuck / turning / 3-jaw / manual - 215 - 630 mm | ROTA FSW

Rota FSW has got many features that can offer optimal function for precise and fast chuck changing on the machines that are turning. It has got many optimal features in it that makes...

Clamp chuck / turning / 3-jaw / manual - 215 - 630 mm | ROTA FSW

Rota FSW has got many features that can offer optimal function for precise and fast chuck changing on the machines that are turning. It has got many optimal features in it that makes it function in a fast and precise manner. It comes with maximum rigidity and can make the whole process so effective. It can easily be locked and released by making use of a single screw that can be adjusted. A flex adapter can be made used for connecting automatically with the draw tube. There is an integrated quick change pallet system that can help in providing flat work surface along with maximum rigidity. It can be easily retrofit and is highly compatible. Every kind of turning machines can easily be retrofitted with this device

Precision chuck / 3-jaw / manual tightening / lathe - 9.7 - 12 mm | ROTA-S flex

The ROTA-S plus manual chucks have been developed with an integrated quick change jaw system. The jaws have a serrated...

Precision chuck / 3-jaw / manual tightening / lathe - 9.7 - 12 mm | ROTA-S flex

The ROTA-S plus manual chucks have been developed with an integrated quick change jaw system. The jaws have a serrated base that guarantee the highest quality workpieces, and are ideal for use with cyclecontrolled lathes. Since the chuck jaws have a quick change system it is not necessary to rework the jaws after a jaw change, and the wedge bar actuation system offers pin point accuracy, clamping repeatablity, and maximum clamping forces.

Manual chuck / lathe / quick-change - ø 160 - 630 mm | ROTA-G

The ROTA-G (straight serrated base jaws) provides high-clamping force due to wedge bar system. It's compatible with all standard bar-diameters machining because...

Manual chuck / lathe / quick-change - ø 160 - 630 mm | ROTA-G

The ROTA-G (straight serrated base jaws) provides high-clamping force due to wedge bar system. It's compatible with all standard bar-diameters machining because of its large hole structure. It's safe and allows ease of use plus it's cost-effective since the chuck jaws are easy to change and reworking of jaws is avoided. The system has stable functioning parts of both sides ensuring continuous accuracy. Its base jaws are versatile and the very high RPM feature optimize use of the lathe chuck. Other 3-jaw chuck versions like ROTA-G 200,250,315 are available. Optional jaw accessories include ROTA-G Chuck, Claws, Top and Clamping Ranges.

Manual tightening chuck / lathe - ROTA Classic

SCHUNK offers the ROTA Classic selection which is composed of precision cast disks, scroll chucks and steel face plates....

Manual tightening chuck / lathe - ROTA Classic

SCHUNK offers the ROTA Classic selection which is composed of precision cast disks, scroll chucks and steel face plates. A wide variety of scroll chucks are available including Cushman system and Wescott manual chucks.

The Cushman system is composed of concentric clamping chucks, while the Wescott system is composed of concentric and separately flexible manual chucks that offer three- and four- chuck jaws. Both systems offers an optional six chuck jaw version.

3-jaw chuck / manual tightening / lathe - 65 - 200 kN | ROTA-S plus 2.0

ROTA-S plus 2.0 has started replacing the popular hand-operated chuck from SCHUNK in sizes 160 - 315 mm. Its innovative collect bar drive delivers superior clamping force while the quick change jaw...

3-jaw chuck / manual tightening / lathe - 65 - 200 kN | ROTA-S plus 2.0

ROTA-S plus 2.0 has started replacing the popular hand-operated chuck from SCHUNK in sizes 160 - 315 mm. Its innovative collect bar drive delivers superior clamping force while the quick change jaw system is noted for easy jaw changing within a few seconds. The system has an optional modular protection sleeve system. It is easy to optimize ROTA-S plus 2.0 and adapt it to the task at hand with closed protection sleeve or depth stop. High precision delivery is ensured with the manual arbor, driven by chuck jaws. High precision clamping with the smallest inner diameter is possible with this feature. The design of the system delivers operational safety and the display pin promises optimal performance. Operational errors are significantly reduced with a jaw securing device.

3-jaw chuck / manual tightening / lathe - ø 160 - 1 000 mm | ROTA-S plus

The manual chucks have ROTA-S Plus (angle serrated base jaws) jaw quick change system to guarantee excellent results in clamping work pieces specifically on cycle...

3-jaw chuck / manual tightening / lathe - ø 160 - 1 000 mm | ROTA-S plus

The manual chucks have ROTA-S Plus (angle serrated base jaws) jaw quick change system to guarantee excellent results in clamping work pieces specifically on cycle controlled lathes. Furthermore, these chucks boast a wedge bar actuation system, which guarantees superior precision , clamping and run out repeatability and also top notch clamping forces.

No network of jaws is needed after changing the jaws thanks to the speedy change system of the chuck jaws. The jaws can be had in 3-jaw chuck / sizes 160 - 1000 mm, with Base jaws (SFG) compatible to system "F" (Forkardt). The best jaws are the groove and tongue type.

3-jaw chuck / manual tightening / lathe - 160 - 630 mm | ROTA HSA

The ROTA HSA is a wedge hook system equipped with a floating piston and compensating jaws. It consists of a lengthy jaw assistance...

3-jaw chuck / manual tightening / lathe - 160 - 630 mm | ROTA HSA

The ROTA HSA is a wedge hook system equipped with a floating piston and compensating jaws. It consists of a lengthy jaw assistance that ensures the ultimate clamping support. It has a low-wear construction that contains ground functional and robust parts. Its metric taper located at the rear allows for rapid centering points replacement.

The ROTA HSA also consists of a radial, floating clamping piston in addition to a wedge hook that secures force transmission.
Kitagawa Europe Limited

3-jaw chuck / manual tightening / lathe / through-hole - ø 2 - 70 mm, max. 9 kN | SC-3(F)

The SC Series 3 features jaw scroll chuck made out of steel which enhances rigidity, durability...

3-jaw chuck / manual tightening / lathe / through-hole - ø 2 - 70 mm, max. 9 kN | SC-3(F)

The SC Series 3 features jaw scroll chuck made out of steel which enhances rigidity, durability and rotational speed. It has a maximum static gripping force and a maximum speed of 9kN and 2,500 rpm, respectively. It weighs 1.5kg with its standard jaws and has a 0.001 moment of inertia. Moreover, its outer and inner gripping range are 2mm-70 and 24mm-64mm, respectively.

3-jaw chuck / manual tightening / lathe / through-hole - ø 3 - 95 mm, max. 12 kN | SC-4(F)

TheSC-4(F) 3-Jaw Scroll Chucks operates with a maximum speed of 2,500...

3-jaw chuck / manual tightening / lathe / through-hole - ø 3 - 95 mm, max. 12 kN | SC-4(F)

TheSC-4(F) 3-Jaw Scroll Chucks operates with a maximum speed of 2,500 rpm. Its jaws are 110 mm in diameter, with 3 to 95 mm outer gripping range and 29 to 84 mm inner gripping range. Its handle yields a maximum force of 44.1 Nm and a maximum static gripping force of 12 kN.

3-jaw chuck / manual tightening / lathe / through-hole - ø 3 - 110 mm, max. 15 kN | SC-5(F)

The SC-5(F) is a 130 mm scroll chuck manufactured by Kitagawa Europe....

3-jaw chuck / manual tightening / lathe / through-hole - ø 3 - 110 mm, max. 15 kN | SC-5(F)

The SC-5(F) is a 130 mm scroll chuck manufactured by Kitagawa Europe. Created with a steel body design, it has a handle torque of 63.7 Nm and a moment of inertia at 0.009 kg.m2. In addition, it features a maximum static gripping force of 15 kN at a speed reaching up to 2500 rpm.

3-jaw chuck / manual tightening / lathe / through-hole - ø 3 - 160 mm, max. 31 kN | JN06 series

The JN06 By Kitagawa from JN series features its 3 jaw scroll chuck that...

3-jaw chuck / manual tightening / lathe / through-hole - ø 3 - 160 mm, max. 31 kN | JN06 series

The JN06 By Kitagawa from JN series features its 3 jaw scroll chuck that is made is a steel body for rotational speed and a heavy duty performance. It has a maximum static gripping force of 31KN and a maximum speed of 4000rpm. The standard jaw of this chuck weighs about 8.4 kg.

3-jaw chuck / manual tightening / lathe / through-hole - ø 4 - 180 mm, max. 31 kN | JN07 series

The JN07 is a 190 mm scroll chuck manufactured by Kitagawa Europe. Created with...

3-jaw chuck / manual tightening / lathe / through-hole - ø 4 - 180 mm, max. 31 kN | JN07 series

The JN07 is a 190 mm scroll chuck manufactured by Kitagawa Europe. Created with a steel body construction, it has an outer gripping range of 4 mm to 180 mm and an inner gripping range of 56 mm to 170 mm. In addition, it features a maximum static gripping force of 31 kN at a speed reaching up to 3500 rpm.
Garant

3-jaw chuck / manual tightening / lathe

The Garant 310670 is a three jaw lathe chuck steel short taper which has a mount according...

3-jaw chuck / manual tightening / lathe

The Garant 310670 is a three jaw lathe chuck steel short taper which has a mount according to DIN 55027 and DIN 55029 standards. With this version, it comes with a manual chubk having a gear scroll and centrically clamping. Its body is made of cast iron or steel having a superior concentricity based on the mountign standard of DIN 6386.
{{item.name}}