+7 (812) 645-08-06
Vacuum lifting devices
select brand
High-capacity pipe vacuum lifter - max. 16 t, ø 14'' - 58'' | Starlift 1000
The Starlift vacuum system handles tube, pipe, tank, or any cylindrical objects. The handling by suction cup is a safe way to manipulate different...
High-capacity pipe vacuum lifter - max. 16 t, ø 14'' - 58'' | Starlift 1000
The Starlift vacuum system handles tube, pipe, tank, or any cylindrical objects. The handling by suction cup is a safe way to manipulate different products without mechanical contact. Its external and internal surfaces, which are made of epoxy and resin, ensures tightness and conserve the intactness of the pipe or tube, without leaving traces.
In case of a power supply failure, the valve does not change its position, which avoids the load from falling off. It has a gripping capacity of >Diameter from 14 to 58 inches, and has a length of up to 20m.
In case of a power supply failure, the valve does not change its position, which avoids the load from falling off. It has a gripping capacity of >Diameter from 14 to 58 inches, and has a length of up to 20m.
High-capacity demolder/turner vacuum lifter for concrete - max. 5.5 t | RET 500 - 2VB
The RET 500-2 VB is a vacuum device designed to ensure the turning of heavy concrete basins. It is specifically designed for an accurate...
High-capacity demolder/turner vacuum lifter for concrete - max. 5.5 t | RET 500 - 2VB
The RET 500-2 VB is a vacuum device designed to ensure the turning of heavy concrete basins. It is specifically designed for an accurate demoulding and turning of four up to five concrete basins every day. The device is applicable inside and outside utilization. Its capability to weight load range up to 5,5 t.
Moreover, the RET 500-2 VB features with dual rectangular suction pads that are designed with exchangeable linear groved gasket set of 50 x 50 cm. It is also available with oil bath vacuum gauge and vacuum detector.
Moreover, the RET 500-2 VB features with dual rectangular suction pads that are designed with exchangeable linear groved gasket set of 50 x 50 cm. It is also available with oil bath vacuum gauge and vacuum detector.
High-capacity concrete plate vacuum lifter - max. 1.6 t | ST 500
The ST 500 is a vacuum device that ensures a secured demoulding and tilting of concrete support walls. This device is...
High-capacity concrete plate vacuum lifter - max. 1.6 t | ST 500
The ST 500 is a vacuum device that ensures a secured demoulding and tilting of concrete support walls. This device is applicable for outside utilization only. It has a capacity to load items up to 1 and 6 kg.
Moreover, this tool is used to be installed on the back of the excavator of the device. The tool kit of four suction pads which are facilitated with quick fastener and assembled on tilt are also provided to generate the device more efficiently.
Moreover, this tool is used to be installed on the back of the excavator of the device. The tool kit of four suction pads which are facilitated with quick fastener and assembled on tilt are also provided to generate the device more efficiently.
High-capacity demolder/turner vacuum lifter for concrete - max. 2.2 t | LV200 3VB
The LV 200 3 VB is a combination of demoulding by three suction pads. It has...
High-capacity demolder/turner vacuum lifter for concrete - max. 2.2 t | LV200 3VB
The LV 200 3 VB is a combination of demoulding by three suction pads. It has...
High-capacity demolder/turner vacuum lifter for concrete - max. 8.5 t | LV 100
The Turning Device LV 100 is suitable to large and very concrete parts it also assures a secured turning of cylindric...
High-capacity demolder/turner vacuum lifter for concrete - max. 8.5 t | LV 100
The Turning Device LV 100 is suitable to large and very concrete parts it also assures a secured turning of cylindric frames or hollow concrete parts. With a service of vacuum turning device LV100 functions indoors as well as outdoors. The suction pads of the vacuum turning device LV100 has a load capacity up to 8.5 tons. With up to 2 solenoid valves controlling "grip / deposit" feature and a one-level air-cooled and oil-lubricated vacuum pump.
1 pad vacuum lifter for flat workpieces - max. 100 kg, ø 210 mm | Vacut-Kun QS-100
Vacuum-Lift's Vacut-Kun (QS-100) is generally utilized for applications that involve handling a...
1 pad vacuum lifter for flat workpieces - max. 100 kg, ø 210 mm | Vacut-Kun QS-100
Vacuum-Lift's Vacut-Kun (QS-100) is generally utilized for applications that involve handling a...
1 pad vacuum lifter for flat workpieces - max. 200 kg, ø 300 mm | Vacut-Kun QS-300
The Vacut-Kun (QS-300) is a quick vacuum lift produced by Fukoku. It is an improved...
1 pad vacuum lifter for flat workpieces - max. 200 kg, ø 300 mm | Vacut-Kun QS-300
The Vacut-Kun (QS-300) is a quick vacuum lift produced by Fukoku. It is an improved version of the Vacut-Kun (QS-100). This vacuum lift can carry a maximum of 200 kg as easily as the older version. This equipment is ensured to be maintenance-free, with a pump developed using our own a vacuum technology. Its pad diameter measures 300.
1 pad vacuum lifter for flat workpieces - Vacut-Kun QS-50
Fukoko presents QS-50 quick vacuum lift with Vacut-Kun technology. It is compact,...
1 pad vacuum lifter for flat workpieces - Vacut-Kun QS-50
Fukoko presents QS-50 quick vacuum lift with Vacut-Kun technology. It is compact, yet provides high absorption power. By hanging on cranes, QS-50 serves well in factories for lifting heavy metal objects, drum cans, etc. The lift is free of maintenance. It has been developed by using Fukoko's in-house vacuum technology.
1 pad vacuum lifter for sheet metal - max. 650 kg, ø 480 mm | Vacu-Combo QS-650
The QS-650 is manufactured by Fukoku, and is equipped with a big tank and one vacuum...
1 pad vacuum lifter for sheet metal - max. 650 kg, ø 480 mm | Vacu-Combo QS-650
The QS-650 is manufactured by Fukoku, and is equipped with a big tank and one vacuum charge with a potential to lift a work-piece in several times or dozen times continuously.
The unit has a maximum lifting load of 650 kg, and has a pad diameter of 480 mm. It has a pump that was developed by the vacuum technology.
The unit has a maximum lifting load of 650 kg, and has a pad diameter of 480 mm. It has a pump that was developed by the vacuum technology.
1 pad vacuum lifter for sheet metal - max. 150 kg, 130 x 400 mm | Vacu-Combo QSD-150
The QSD-150, a one-pad vacuum lifter for sheet metal, is manufactured by Fukoku...
1 pad vacuum lifter for sheet metal - max. 150 kg, 130 x 400 mm | Vacu-Combo QSD-150
The QSD-150, a one-pad vacuum lifter for sheet metal, is manufactured by Fukoku Corp. The device is suitable for transporting the work piece to the cutting device, making it resistant to cutting oil or powder to Vacu-Combo.
The unit has a maximum capacity of 150 kg, and dimensions of 130 x 400.
The unit has a maximum capacity of 150 kg, and dimensions of 130 x 400.