+7 (812) 645-08-06
Arc welding machines (MIG, TIG,...)
select brand
Orbital cutting machine / for tubes / arc welding machines - US 3000
Work to be performed, having different modules that are adapted on the cross carrier assembly this allows the machine along with the weld from 3 370 to 4070. The turning tool holder is mounted via the Z carriage. Work is performed...
Orbital cutting machine / for tubes / arc welding machines - US 3000
Work to be performed, having different modules that are adapted on the cross carrier assembly this allows the machine along with the weld from 3 370 to 4070. The turning tool holder is mounted via the Z carriage. Work is performed...
Orbital cutting machine / for tubes / arc welding machines - 2 - 88" | PROTEM TT-NG
PROTEM presents TT-NG series tube and pipe cutting and bevelling machines. The machines provide precise cutting and/or bevelling tubes as well as pipes of all schedules in a single, simultaneous...
Orbital cutting machine / for tubes / arc welding machines - 2 - 88" | PROTEM TT-NG
PROTEM presents TT-NG series tube and pipe cutting and bevelling machines. The machines provide precise cutting and/or bevelling tubes as well as pipes of all schedules in a single, simultaneous operation. The machines have been specifically developed to suit machine tubes with thick walls. They are sturdy and are suitable for installation in multiple positions.
They have a split frame configuration, which allows opening in 2 half-shells. For manual clamping, they use 4 independent adjustable jaws. The machines have a rear centering feature and fully enclosed drive gears for operators’ safety. They offer machining capacity of 60,3 mm OD – 2082,8 mm OD and clamping capacity of 2” – 82” OD.
They have a split frame configuration, which allows opening in 2 half-shells. For manual clamping, they use 4 independent adjustable jaws. The machines have a rear centering feature and fully enclosed drive gears for operators’ safety. They offer machining capacity of 60,3 mm OD – 2082,8 mm OD and clamping capacity of 2” – 82” OD.
Arc welding machine / orbital / for tubes - 12,7 - 60,3 mm | SE65
The SE65 unit is an orbital arc welding machine developed by Protem. It is specifically designed to cater applications...
Arc welding machine / orbital / for tubes - 12,7 - 60,3 mm | SE65
The SE65 unit is an orbital arc welding machine developed by Protem. It is specifically designed to cater applications that include tubes, fittings, micro fittings and elbows. In addition, it can be also utilized in squaring tubes from 12.7 mm ID to 60.3 mm OD. .
The machine has a monobloc collet which enables the easy set up. The tool holder plate equipped with two tool inserts which allows to cover the machining range without having to adjust anything.
The machine has a monobloc collet which enables the easy set up. The tool holder plate equipped with two tool inserts which allows to cover the machining range without having to adjust anything.
Arc welding machine / orbital / for tubes - 12.5 - 120 mm | US25
The Type SE65 is an outside clamping facing machine from Protem. It is ideal for use with tubes, fittings, micro fittings, and elbows....
Arc welding machine / orbital / for tubes - 12.5 - 120 mm | US25
The Type SE65 is an outside clamping facing machine from Protem. It is ideal for use with tubes, fittings, micro fittings, and elbows. This product is suitable for squaring tubes with diameters from 12.7 mm inner diameter up to 60.3 mm outer diameter. It has a tool holder plate that is installed with two tool inserts that enable the cover of machining range without doing any adjustments. The machine set-up is quickly done due to its monobloc collect. It also has a graduated vernier that provides quality and accurate weld preps.
Orbital cutting machine / for tubes / arc welding machines - 30 - 114.3 mm | US30CH
The US30 is a unit manufactured by Protem. It is a beveling machine or cutting machine that is contour that covers the...
Orbital cutting machine / for tubes / arc welding machines - 30 - 114.3 mm | US30CH
The US30 is a unit manufactured by Protem. It is a beveling machine or cutting machine that is contour that covers the range from 1 inch to 4 inches. It has a standard tool plate that accepts the multiple tool bits. It permits the four simultaneous machining operations. The unit has a machining capacity of 0 mm ID – 114,3 mm OD1” ID – 4” OD while its clamping capacity is 30 mm ID – 114* mm ID (1” ID – 4” OD.
Manual welding machine for pipes - Maxiplast
The Maxiplast is a mobile plastic welding machine mainly used for heating several pipes and fittings...
Manual welding machine for pipes - Maxiplast
The Maxiplast is a mobile plastic welding machine mainly used for heating several pipes and fittings which are made out of a polyolefine material with a dimension of OD 50 - 160. The robust machine is built with 2 aluminum clamping units meant to be used for the fabrication of segmented bends. Through the utilization of several reducer inserts, all clamping options may be realized.
Manual welding machine for pipes - Miniplast 2
Miniplast/2 is a fine quality plastic welding machine, useful for butt welding of PP, PE and PVDF pipes. You can also use this machine for fittings with an OD ranging from 20 to 110 mm. The basic machine is delivered with a construction...
Manual welding machine for pipes - Miniplast 2
Miniplast/2 is a fine quality plastic welding machine, useful for butt welding of PP, PE and PVDF pipes. You can also use this machine for fittings with an OD ranging from 20 to 110 mm. The basic machine is delivered with a construction that contains two large aluminum clamping tools, which can swivel up to 15 degrees on each fabrication side of the segmented bends. In addition, when screwing in 4 small reduction inserts, a double clamping with a smaller diameter can be obtained.
When it comes to fittings with short legs, the manufacturer can make available a small fitting clamping tool, while the special construction of the pressure build-up device makes the machine fixed directly at pipe ends that are very short, on sheets and walls. The compact and light construction, along with the horizontal vertical motions make the machine ideal for installation works and pipeline systems.
When it comes to fittings with short legs, the manufacturer can make available a small fitting clamping tool, while the special construction of the pressure build-up device makes the machine fixed directly at pipe ends that are very short, on sheets and walls. The compact and light construction, along with the horizontal vertical motions make the machine ideal for installation works and pipeline systems.
Orbital welding machine / arc / for tubes - ø 20 - 275 mm | ORBIWELD TP series
The Orbiweld TP series is an arc welding machine developed by Orbitalum Tools....
Orbital welding machine / arc / for tubes - ø 20 - 275 mm | ORBIWELD TP series
The Orbiweld TP series is an arc welding machine developed by Orbitalum Tools. It is built based on unique structure and functionality. In addition, the framework is equipped with extremely compact design due to the drive motor that is fully integrated into the housing. It is also fixed with 20 to 275 mm diameters.