+7 (812) 645-08-06
Bearing pullers
select brand
Mechanical bearing puller - 90x90
Product Description Because it is a double-rail structure which has a dynamic torque of this motion systems more preferred where is needed moment strength. The system long-lead ball screws can be achieved...
Mechanical bearing puller - 90x90
Product Description Because it is a double-rail structure which has a dynamic torque of this motion systems more preferred where is needed moment strength. The system long-lead ball screws can be achieved...
Hydraulic tube puller - ATP III
Electric/Hydraulic Semi-automatic Tube Pullers For Light &
Medium Duty Applications
■ The Airetool Model ATP III Tube Pulling Ram develops
13-3/4 tons of pulling...
Medium Duty Applications
■ The Airetool Model ATP III Tube Pulling Ram develops
13-3/4 tons of pulling...
Hydraulic tube puller - ATP III
Electric/Hydraulic Semi-automatic Tube Pullers For Light &
Medium Duty Applications
■ The Airetool Model ATP III Tube Pulling Ram develops
13-3/4 tons of pulling power
■ Easily remove tubes up to 1 in. O.D. from tube sheets up to
1-1/2 in. thickness*
■ Grippers bite uniformly into the tube I.D. as the piston
retracts, pulling the tube from the sheet
■ Provides a full 4-3/4 inch total pulling length through a
double 2-3/8 inch pull
■ Electric switch in the handle of the ram enables the
hydraulic pump to operate the ram cylinder
■ Puller reverses instantly at the end of the pulling cycle or
when the trigger is released
Medium Duty Applications
■ The Airetool Model ATP III Tube Pulling Ram develops
13-3/4 tons of pulling power
■ Easily remove tubes up to 1 in. O.D. from tube sheets up to
1-1/2 in. thickness*
■ Grippers bite uniformly into the tube I.D. as the piston
retracts, pulling the tube from the sheet
■ Provides a full 4-3/4 inch total pulling length through a
double 2-3/8 inch pull
■ Electric switch in the handle of the ram enables the
hydraulic pump to operate the ram cylinder
■ Puller reverses instantly at the end of the pulling cycle or
when the trigger is released
Hydraulic tube puller - PATP III
Air/Hydraulic Semi-automatic Tube Pullers For Light & Medium
Duty Applications
■ The Airetool Model PATP III Tube Pulling Ram develops
13-3/4 tons of pulling...
Duty Applications
■ The Airetool Model PATP III Tube Pulling Ram develops
13-3/4 tons of pulling...
Hydraulic tube puller - PATP III
Air/Hydraulic Semi-automatic Tube Pullers For Light & Medium
Duty Applications
■ The Airetool Model PATP III Tube Pulling Ram develops
13-3/4 tons of pulling power
■ Easily remove tubes up to 1 in. O.D. from tube sheets up to
1-1/2 in. thickness*
■ Grippers bite uniformly into the tube I.D. as the piston
retracts, pulling the tube from the sheet
■ Provides a full 4-3/4 inch total pulling length through a
double 2-3/8 inch pull
■ Electric switch in the handle of the ram enables the hydraulic
pump to operate the ram cylinder
■ Puller reverses instantly at the end of the pulling cycle or
when the trigger is released
Duty Applications
■ The Airetool Model PATP III Tube Pulling Ram develops
13-3/4 tons of pulling power
■ Easily remove tubes up to 1 in. O.D. from tube sheets up to
1-1/2 in. thickness*
■ Grippers bite uniformly into the tube I.D. as the piston
retracts, pulling the tube from the sheet
■ Provides a full 4-3/4 inch total pulling length through a
double 2-3/8 inch pull
■ Electric switch in the handle of the ram enables the hydraulic
pump to operate the ram cylinder
■ Puller reverses instantly at the end of the pulling cycle or
when the trigger is released
Hydraulic tube puller - HDP III
The HDP III is available in various versions. The model suited for tube sizes of 1/2" to 1" is the Spear Adapter model HDP 99 3055 3, to be accessorized with...
Hydraulic tube puller - HDP III
The HDP III is available in various versions. The model suited for tube sizes of 1/2" to 1" is the Spear Adapter model HDP 99 3055 3, to be accessorized with a compatible sized tube pulling spear. A load cap is required in case of protruding and closely positioned surrounding tubes.
The version suited for work with tube sizes of 1-1/8" to 2-1/2" is the Spear Adapter model HDP 99 3055 3, to be accessorized with a compatible sized tube pulling spear and an adapter kit of version HDP 99. The HDP III Ram kit comprises a 5526274 Ram, a 2900007 load cap model HDP 99 LC 1 and a 5526280 adapter lock mechanism system.
The version suited for work with tube sizes of 1-1/8" to 2-1/2" is the Spear Adapter model HDP 99 3055 3, to be accessorized with a compatible sized tube pulling spear and an adapter kit of version HDP 99. The HDP III Ram kit comprises a 5526274 Ram, a 2900007 load cap model HDP 99 LC 1 and a 5526280 adapter lock mechanism system.
Hydraulic tube puller - HDQ-III
The HDQ III is a gripper-type tube puling unit, that is intended for 1-1/4"...
Hydraulic tube puller - HDQ-III
The HDQ III is a gripper-type tube puling unit, that is intended for 1-1/4" to 1 - 3/4" O.D. tubes, that are often found in heat exchangers and fire tube boilers. This model uses HDQ Gripper Kits and enables fast and easy tube pulling work. It is available with a selection of gripper kits according to tube size.
Hydraulic tube puller - RAV III
The RAV Semi -Continuous tube pulling Ram provides non stop pulling of tubes up to 1" O.D. (25.4mm)....
Hydraulic tube puller - RAV III
The RAV Semi -Continuous tube pulling Ram provides non stop pulling of tubes up to 1" O.D. (25.4mm). Tubes that are over 1" O.D. will have a maximum pulling length of 7" (177mm).To place an order, choose the desired RAV III Tube puller Kit Spear and Collar. This universal design of the system allows the user to simply change to a tube of different size with minimal additional costs.
Hydraulic bearing puller / three-arm - 10 - 30 t | SCP series
The SCP range of self-contained hydraulic pullers offers a choice of 3
models, each with integral...
models, each with integral...
Hydraulic bearing puller / three-arm - 10 - 30 t | SCP series
The SCP range of self-contained hydraulic pullers offers a choice of 3
models, each with integral manually operated hydraulic pump and
multi-position operating handle. The completely sealed hydraulic system
of the SCP pullers enables use of the tool in any position and all models
are easy to operate and provide an efficient solution for many pulling
applications.
models, each with integral manually operated hydraulic pump and
multi-position operating handle. The completely sealed hydraulic system
of the SCP pullers enables use of the tool in any position and all models
are easy to operate and provide an efficient solution for many pulling
applications.
Bearing puller - 10 - 50 t | ACP series
The ACP heavy duty, auto-centering hydraulic puller kit range offers a choice of
4 models, with capacities from 10 to 50 tonnes....
4 models, with capacities from 10 to 50 tonnes....
Bearing puller - 10 - 50 t | ACP series
The ACP heavy duty, auto-centering hydraulic puller kit range offers a choice of
4 models, with capacities from 10 to 50 tonnes. All models are supplied
complete with a detachable hollow ram cylinder, manually operated pump,
hydraulic hose and a 100mm diameter pressure gauge. All models are easy
to set up and are the ideal tool for all pulling, pushing, installing and removing
applications required for press fitted or heat fitted parts, including wheels,
sprockets, flywheels, gears and bearings.
4 models, with capacities from 10 to 50 tonnes. All models are supplied
complete with a detachable hollow ram cylinder, manually operated pump,
hydraulic hose and a 100mm diameter pressure gauge. All models are easy
to set up and are the ideal tool for all pulling, pushing, installing and removing
applications required for press fitted or heat fitted parts, including wheels,
sprockets, flywheels, gears and bearings.
Hydraulic bearing puller / three-arm / two-arm / self-centering - 4.5 - 50 t | PKS series
The PKS heavy duty hydraulic puller range is designed for removing stubborn parts such as wheels, gears,
sprockets,...
sprockets,...
Hydraulic bearing puller / three-arm / two-arm / self-centering - 4.5 - 50 t | PKS series
The PKS heavy duty hydraulic puller range is designed for removing stubborn parts such as wheels, gears,
sprockets, sleeves, pulleys and other similar items. The range offers a selection of 8 models with pulling
capacities up to 50 tonnes. All models are supplied complete with a full set of versatile detachable hydraulic
components. All models are safe and easy to operate and avoid the need for heating and hammering.
sprockets, sleeves, pulleys and other similar items. The range offers a selection of 8 models with pulling
capacities up to 50 tonnes. All models are supplied complete with a full set of versatile detachable hydraulic
components. All models are safe and easy to operate and avoid the need for heating and hammering.
Hydraulic bearing puller / two-arm / multifunctional / self-centering - 10 - 50 t | PKC series
The PKC heavy duty, multi-purpose hydraulic puller kit range is
extremely versatile and includes 2-way and 3-way grip pullers
(as detailed on page...
extremely versatile and includes 2-way and 3-way grip pullers
(as detailed on page...
Hydraulic bearing puller / two-arm / multifunctional / self-centering - 10 - 50 t | PKC series
The PKC heavy duty, multi-purpose hydraulic puller kit range is
extremely versatile and includes 2-way and 3-way grip pullers
(as detailed on page 119), bearing pullers, bearing cup pullers and
cross head pullers. All models are designed for pulling, pushing,
installing and removing all press fitted or heat fitted parts such as
gears, bearings, sleeves, cogs, internal bearings, wheels, sprockets,
flywheels, etc. The range offers a selection of 4 models with pulling
capacities up to 50 tonnes, all supplied complete with a full set of
versatile, detachable hydraulic components.
extremely versatile and includes 2-way and 3-way grip pullers
(as detailed on page 119), bearing pullers, bearing cup pullers and
cross head pullers. All models are designed for pulling, pushing,
installing and removing all press fitted or heat fitted parts such as
gears, bearings, sleeves, cogs, internal bearings, wheels, sprockets,
flywheels, etc. The range offers a selection of 4 models with pulling
capacities up to 50 tonnes, all supplied complete with a full set of
versatile, detachable hydraulic components.