+7 (812) 645-08-06
Particle foam molding machines: EPS, EPP, EPE
select brand
Electric molding machine for expanded polystyrene and polypropylène (EPS, EPP) - EMMotion
The EMMotion machine range for processing EPS and EPP is driven by an innovative electric servo drive with knee levers. Unique in the world, and tried and tested over many...
Electric molding machine for expanded polystyrene and polypropylène (EPS, EPP) - EMMotion
The EMMotion machine range for processing EPS and EPP is driven by an innovative electric servo drive with knee levers. Unique in the world, and tried and tested over many years, the electric servo drive is extremely energy efficient and resource-friendly.
Advantages
Dynamic electric servo drive guarantees cleanliness and low costs
Modern process technology due to the fully electronic regulation system
Highest availability of production units due to the EM quick mould change system
Energy-saving EM steam chamber system
Modern PLC control with operator-oriented interface and processor-oriented menu design
Advantages
Dynamic electric servo drive guarantees cleanliness and low costs
Modern process technology due to the fully electronic regulation system
Highest availability of production units due to the EM quick mould change system
Energy-saving EM steam chamber system
Modern PLC control with operator-oriented interface and processor-oriented menu design
Block EPS molding machine / for EPS - EMTower
Since the market launch of its EMTower machine range, Erlenbach has been setting new standards in the manufacturing and processing of EPS block moulds. The innovative technology enables the processor to continuously adapt to constantly changing market situations....
Block EPS molding machine / for EPS - EMTower
Since the market launch of its EMTower machine range, Erlenbach has been setting new standards in the manufacturing and processing of EPS block moulds. The innovative technology enables the processor to continuously adapt to constantly changing market situations. Quality and efficiency requirements are covered by individual block mould sizes.
Depending on production capacity, investment volume and variable or fixed block size the block moulding machine EMTower is available in three different versions as standard, perform and adjust. In co-operation with our customers, Erlenbach has developed a block moulding system specially designed to handle your products.
Advantages:
Leading process technology due to fully electronic regulating systems
Modern PLC control with operator-oriented interface and processor-oriented menu design
Shortest cycle times
Low energy consumption
Homogenous distribution of bulk density
Homogenous welding
Low residual moisture
Depending on production capacity, investment volume and variable or fixed block size the block moulding machine EMTower is available in three different versions as standard, perform and adjust. In co-operation with our customers, Erlenbach has developed a block moulding system specially designed to handle your products.
Advantages:
Leading process technology due to fully electronic regulating systems
Modern PLC control with operator-oriented interface and processor-oriented menu design
Shortest cycle times
Low energy consumption
Homogenous distribution of bulk density
Homogenous welding
Low residual moisture
Polystyrene pre-expander / EPS - EMBead
Pre-expansion is the starting point for processing particle foams made of EPS and EPP. Our extensive knowledge of all process-relevant variables means that Erlenbach
pre-expanders ensure efficient material processing. With...
pre-expanders ensure efficient material processing. With...
Polystyrene pre-expander / EPS - EMBead
Pre-expansion is the starting point for processing particle foams made of EPS and EPP. Our extensive knowledge of all process-relevant variables means that Erlenbach
pre-expanders ensure efficient material processing. With its discontinuous and continuous preexpanding systems, the EMBead product range guarantees innovative solutions combined with cost-effective use of the system.
Advantages discontinous operating
Suitable for all common and special materials
Wide density range
Highest expansion factor
Flexible operation
Short set up time and less maintenance required
High output with low pentane products
Higher availability and longer lifetime
Safe work environment
Advantages continous operating
Suitable for bulk production
Mature technology
Low budget investment
pre-expanders ensure efficient material processing. With its discontinuous and continuous preexpanding systems, the EMBead product range guarantees innovative solutions combined with cost-effective use of the system.
Advantages discontinous operating
Suitable for all common and special materials
Wide density range
Highest expansion factor
Flexible operation
Short set up time and less maintenance required
High output with low pentane products
Higher availability and longer lifetime
Safe work environment
Advantages continous operating
Suitable for bulk production
Mature technology
Low budget investment
Particle foam molding machine for expanded polystyrene and polypropylène (EPS, EPP) with insert - EMShuttle
The shuttle principle enables the placement of inserts, either manually or automatically, during foaming process. The standard version of the EMShuttle...
Particle foam molding machine for expanded polystyrene and polypropylène (EPS, EPP) with insert - EMShuttle
The shuttle principle enables the placement of inserts, either manually or automatically, during foaming process. The standard version of the EMShuttle consists of a shuttle side with tool carrier for inserts and a core side.
Advantages
Modern process technology due to the fully electronic regulation system
Flexible mould system
Reduced cycle times, since inserts can be inserted during the foaming process
Modern PLC control with operator-oriented interface and processor-oriented menu design
High availability
Advantages
Modern process technology due to the fully electronic regulation system
Flexible mould system
Reduced cycle times, since inserts can be inserted during the foaming process
Modern PLC control with operator-oriented interface and processor-oriented menu design
High availability
Particle foam molding machine - EMBase
Developed and made in Germany, the hydraulic driven EMBase is distinguished by a low price that is unrivalled...
Particle foam molding machine - EMBase
Developed and made in Germany, the hydraulic driven EMBase is distinguished by a low price that is unrivalled on the market. The EMBase is ideal as a cost-effective starter model, or for expanding your production or as a replacement investment.
Advantages
Low investment costs
Solid and robust construction
Long service life
Flexible mould system
High availability
Advantages
Low investment costs
Solid and robust construction
Long service life
Flexible mould system
High availability
Expanded polystyrene pre-expander / EPS - max. 1.5 t
It is no longer a novelty but a technologic reality now affirmed, the Conical Pre-expander of Nuova IDROPRESS S.p.A. presented in 1998 and already manufactured in more than 200 models in only 15 years.
The range of Nuova Idropress expanders usable both for moulding and for blocks...
The range of Nuova Idropress expanders usable both for moulding and for blocks...
Expanded polystyrene pre-expander / EPS - max. 1.5 t
It is no longer a novelty but a technologic reality now affirmed, the Conical Pre-expander of Nuova IDROPRESS S.p.A. presented in 1998 and already manufactured in more than 200 models in only 15 years.
The range of Nuova Idropress expanders usable both for moulding and for blocks include two small of 0,8 and 1,5 m3 volume available totally cone-shaped (capacity up to 1,5 ton / hour @ 20 g/l) and six big truncated cone with volumes usable variable from 2,0 up to 8,0 m3 (and capacity up to 5,8 ton / hour @ 20 g/l).
The great advantage of the conical machine consists in having a bottom diameter of only 800 mm. in the big models and respectively of 500 mm. and 600 mm. in those small, for which the raw material layer concentrated on the bottom results being always significant, and besides, the centrifugal force that acts on the material during the agitator rotation results reduced thanks to the narrow diameter of the chamber. This does not allow the steam, always injected from the bottom of the chamber, to find preferential ways and it is forced to cross the material ensuring the uniformity of the expansion.
The range of Nuova Idropress expanders usable both for moulding and for blocks include two small of 0,8 and 1,5 m3 volume available totally cone-shaped (capacity up to 1,5 ton / hour @ 20 g/l) and six big truncated cone with volumes usable variable from 2,0 up to 8,0 m3 (and capacity up to 5,8 ton / hour @ 20 g/l).
The great advantage of the conical machine consists in having a bottom diameter of only 800 mm. in the big models and respectively of 500 mm. and 600 mm. in those small, for which the raw material layer concentrated on the bottom results being always significant, and besides, the centrifugal force that acts on the material during the agitator rotation results reduced thanks to the narrow diameter of the chamber. This does not allow the steam, always injected from the bottom of the chamber, to find preferential ways and it is forced to cross the material ensuring the uniformity of the expansion.
Block EPS molding machine / for EPS
The NUOVA IDROPRESS S.p.A. Vertical Block Moulding Machines are the result of a continual technological research & development and of many years of experience acquired in the realization of more than 600 Machines of this...
Block EPS molding machine / for EPS
The NUOVA IDROPRESS S.p.A. Vertical Block Moulding Machines are the result of a continual technological research & development and of many years of experience acquired in the realization of more than 600 Machines of this type beginning since far 1971.
We are proud of being able to say that WE INVENTED the vertical Block Moulding Machine more than 40 years ago and after years of debates and technical & commercial discussions, all the manufacturing competitors actually present on the market have also implemented the Vertical Block Mould to their previous technology of Horizontal Block Mould.
The way opened by us has always been based on technical reasons and precise physical principles that have been included in the operational forms of our machines, then optimized with all these years of experience matured on field in cooperation with our Customers.
We are proud of being able to say that WE INVENTED the vertical Block Moulding Machine more than 40 years ago and after years of debates and technical & commercial discussions, all the manufacturing competitors actually present on the market have also implemented the Vertical Block Mould to their previous technology of Horizontal Block Mould.
The way opened by us has always been based on technical reasons and precise physical principles that have been included in the operational forms of our machines, then optimized with all these years of experience matured on field in cooperation with our Customers.
Expanded polystyrene (EPS) sandwich panel manufacturing machine
Expanded polystyrene is white and lightweight material with excellent water-proofing, thermal insulation, soundproofing and buffering properties, and our Expanded Polystyrene Sandwich Panel Producing Equipment, using it as insulator, is the automation equipment that can continuously and efficiently produce expanded polystyrene sandwich panels of exquisite and diverse shapes.
This...
This...
Expanded polystyrene (EPS) sandwich panel manufacturing machine
Expanded polystyrene is white and lightweight material with excellent water-proofing, thermal insulation, soundproofing and buffering properties, and our Expanded Polystyrene Sandwich Panel Producing Equipment, using it as insulator, is the automation equipment that can continuously and efficiently produce expanded polystyrene sandwich panels of exquisite and diverse shapes.
This equipment has the advantages such as high durability, easy management, technology equivalent to those of advanced European companies and relatively competitive price, and is the excellent facility with the largest market share in Korea. Besides, it has been exported to Asia, Middle East, Central & South America and so on, and is well received from customers.
Expanded Polystyrene Sandwich Panel Producing Line consists of Un-coiler that inputs and releases coil, Roll Forming Unit that makes shape of coil, E.P.S. Board Supplying System that inputs expanded polystyrene board and properly cutting/processing it, Side & Surface Trimming System that cuts the binding sites and surface of panel in accordance with the required specification, Glue Applying System that applies bond to attach steel plate and expanded polystyrene, Laminating Unit that makes the shape of sandwich panel,
Panel Cutting Unit that cuts the fabricated sandwich panel, Auto Stacking Unit that loads the finished panels, and Panel Packing Unit that packs the loaded panels with plastic wrap and discharge them.
This equipment has the advantages such as high durability, easy management, technology equivalent to those of advanced European companies and relatively competitive price, and is the excellent facility with the largest market share in Korea. Besides, it has been exported to Asia, Middle East, Central & South America and so on, and is well received from customers.
Expanded Polystyrene Sandwich Panel Producing Line consists of Un-coiler that inputs and releases coil, Roll Forming Unit that makes shape of coil, E.P.S. Board Supplying System that inputs expanded polystyrene board and properly cutting/processing it, Side & Surface Trimming System that cuts the binding sites and surface of panel in accordance with the required specification, Glue Applying System that applies bond to attach steel plate and expanded polystyrene, Laminating Unit that makes the shape of sandwich panel,
Panel Cutting Unit that cuts the fabricated sandwich panel, Auto Stacking Unit that loads the finished panels, and Panel Packing Unit that packs the loaded panels with plastic wrap and discharge them.