+7 (812) 645-08-06
Unit coolers
select brand
Commercial unit cooler - 0.7 - 9.9 kW | JB series
INTARCON series are evaporating units slim-type are designed to cover a wide range of cooling capacity in the most usual...
Commercial unit cooler - 0.7 - 9.9 kW | JB series
INTARCON series are evaporating units slim-type are designed to cover a wide range of cooling capacity in the most usual constructions.
These units is characterized by been fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. These units can be set up with different fin spacing depending on your needs, with a new design of efficiency and reliability tested.
These units is characterized by been fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. These units can be set up with different fin spacing depending on your needs, with a new design of efficiency and reliability tested.
Dual-flow unit cooler - 2.1 - 27.7 kW | JD series
Double flow low-profile INTARCON evaporating units are designed to cover a wide range of cooling needs in the most usual constructions. These series are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and switchboard electronic control. These units, featuring a new design...
Dual-flow unit cooler - 2.1 - 27.7 kW | JD series
Double flow low-profile INTARCON evaporating units are designed to cover a wide range of cooling needs in the most usual constructions. These series are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and switchboard electronic control. These units, featuring a new design and previously tested, can be customized with different fin spacing.
These units are especially suitable for mall positive temperature cold rooms, handling and processing rooms and many other high temperature and medium temperature with laminar air flow applications, due to 3 different low-noise fan speed. Are available in configurations:
JD series: Double flow evaporating units in a low-profile construction for high and medium temperature. There are 3 versions, according to the application:
AJD-UF: Quasistatic evaporating unit performing a very low speed for minimum air flow demands, e.g. meat. Fin spacing of 6 mm for a cooling capacity range from 2,1 to 9,9 kW.
AJD-NF: Double flow evaporating units low-speed, for working rooms where the air-flow intensitity is to be reduced at minimum level to guarantee workers health and comfort. Fin spacing of 4 mm for a cooling capacity range from 2,6 to 23,3 kW.
AJD-AF: Double flow evaporating units high-speed with fin spacing of 4 mm for a cooling capacity range from 3,4 to 27,7 kW.
These units are especially suitable for mall positive temperature cold rooms, handling and processing rooms and many other high temperature and medium temperature with laminar air flow applications, due to 3 different low-noise fan speed. Are available in configurations:
JD series: Double flow evaporating units in a low-profile construction for high and medium temperature. There are 3 versions, according to the application:
AJD-UF: Quasistatic evaporating unit performing a very low speed for minimum air flow demands, e.g. meat. Fin spacing of 6 mm for a cooling capacity range from 2,1 to 9,9 kW.
AJD-NF: Double flow evaporating units low-speed, for working rooms where the air-flow intensitity is to be reduced at minimum level to guarantee workers health and comfort. Fin spacing of 4 mm for a cooling capacity range from 2,6 to 23,3 kW.
AJD-AF: Double flow evaporating units high-speed with fin spacing of 4 mm for a cooling capacity range from 3,4 to 27,7 kW.
Unit cooler - 2.3 - 26.2 kW | KC series
Cubic-type evaporating units INTARCON are designed to cover a wide range of cooling power in the most usual constructions.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally...
These units are fully equipped with thermostatic expansion and solenoid valves (optionally...
Unit cooler - 2.3 - 26.2 kW | KC series
Cubic-type evaporating units INTARCON are designed to cover a wide range of cooling power in the most usual constructions.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. These units, previously tested and featuring a new design, can be customized with different fin spacing.
To avoid ice making and to collect surface condensation, these units comprise an insulated double tray. Electrical heaters in the tray as well as imbricated in coil (inside a tube to protect them).
KC series: cubic-type evaporating units for refrigeration at medium and low temperature, with 4 or 6 mm fin spacing, and cooling power from 4,5 to 26,2 kW in medium temperature, and 2,3 to 11,3 kW in low temperature.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. These units, previously tested and featuring a new design, can be customized with different fin spacing.
To avoid ice making and to collect surface condensation, these units comprise an insulated double tray. Electrical heaters in the tray as well as imbricated in coil (inside a tube to protect them).
KC series: cubic-type evaporating units for refrigeration at medium and low temperature, with 4 or 6 mm fin spacing, and cooling power from 4,5 to 26,2 kW in medium temperature, and 2,3 to 11,3 kW in low temperature.
Industrial unit cooler - 86.6 kW | KH series
INTARCON Cubic-type evaporating units are designed to cover a wide range of cooling power in the most usual constructions.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and...
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and...
Industrial unit cooler - 86.6 kW | KH series
INTARCON Cubic-type evaporating units are designed to cover a wide range of cooling power in the most usual constructions.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. These units, previously tested and featuring a new design, can be customized with different fin spacing.
To avoid ice making and to collect surface condensation, these evaporating units feature an insulated double tray. The top cover and capillaries are insulated as well. Low temperature units feature electrical heaters in capillaries area. Low and medium temperature units feauture electrical heaters in the tray as well as imbricated in coil (inside a tube to protect them). Other significant improvements in fans are their independent power supply as well as double-flow air insulation of each fan to avoir air recirculaton.
KH series: industrial cubic-type evaporating units for refrigeration at high medium, low temperature and deep freezing, with 4, 5, 7 or 10 mm fin spacing, and cooling power up to 86,6 kW.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. These units, previously tested and featuring a new design, can be customized with different fin spacing.
To avoid ice making and to collect surface condensation, these evaporating units feature an insulated double tray. The top cover and capillaries are insulated as well. Low temperature units feature electrical heaters in capillaries area. Low and medium temperature units feauture electrical heaters in the tray as well as imbricated in coil (inside a tube to protect them). Other significant improvements in fans are their independent power supply as well as double-flow air insulation of each fan to avoir air recirculaton.
KH series: industrial cubic-type evaporating units for refrigeration at high medium, low temperature and deep freezing, with 4, 5, 7 or 10 mm fin spacing, and cooling power up to 86,6 kW.
Unit cooler - 8.6 - 46.74 kW | KV series
INTARCON cubic-type evaporating units are designed to cover a wide range of cooling power in the most usual constructions.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration...
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration...
Unit cooler - 8.6 - 46.74 kW | KV series
INTARCON cubic-type evaporating units are designed to cover a wide range of cooling power in the most usual constructions.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. Previously tested and featuring a new design, these units can be customized with different fin spacing.
This series is specially designed for freezing tunnels, available in 4 different heights thanks to adjustable brackets. They feature easy access for installation, cleaning and manteinance, being the evaporator and the coil supplied as spare parts to be assembled with simple installation.
To avoid ice making and to collect surface condensation, an insulating double tray is included. Electrical heaters are imbricated in coil (inside a tube to protect them) as well as set up in the tray.
KV series: tunnel evaporating units are designed with 10 mm fin spacing, cooling capacity from 8,6 to 46,74 kW, and available static pressure between 100-120 Pa.
These units are fully equipped with thermostatic expansion and solenoid valves (optionally with electronic expansion valve), as well as aspiration siphon and electronic control. Previously tested and featuring a new design, these units can be customized with different fin spacing.
This series is specially designed for freezing tunnels, available in 4 different heights thanks to adjustable brackets. They feature easy access for installation, cleaning and manteinance, being the evaporator and the coil supplied as spare parts to be assembled with simple installation.
To avoid ice making and to collect surface condensation, an insulating double tray is included. Electrical heaters are imbricated in coil (inside a tube to protect them) as well as set up in the tray.
KV series: tunnel evaporating units are designed with 10 mm fin spacing, cooling capacity from 8,6 to 46,74 kW, and available static pressure between 100-120 Pa.
Unit cooler for blast freezing applications - 14 - 107 kW | FL series
THERMOKEY presents the Blast Freezer Unit Coolers.
This floor unit coolers series is ideal for all sectors where fast freezing of food is necessary, for example industries preparing meat, poultry, fish, bakery, dairy, ice...
This floor unit coolers series is ideal for all sectors where fast freezing of food is necessary, for example industries preparing meat, poultry, fish, bakery, dairy, ice...
Unit cooler for blast freezing applications - 14 - 107 kW | FL series
THERMOKEY presents the Blast Freezer Unit Coolers.
This floor unit coolers series is ideal for all sectors where fast freezing of food is necessary, for example industries preparing meat, poultry, fish, bakery, dairy, ice...
This floor unit coolers series is ideal for all sectors where fast freezing of food is necessary, for example industries preparing meat, poultry, fish, bakery, dairy, ice...
The food industry unit cooler - max. 12 kW | PH, PM series
These are new coolers with direct expansion units from THERMOKEY. which can be installed in medium and small rooms for storing fresh and frozen goods. The PH series has 4 mm fin spacing and keeps temperatures between 15 to 2°C. The PM series keeps temperatures...
The food industry unit cooler - max. 12 kW | PH, PM series
These are new coolers with direct expansion units from THERMOKEY. which can be installed in medium and small rooms for storing fresh and frozen goods. The PH series has 4 mm fin spacing and keeps temperatures between 15 to 2°C. The PM series keeps temperatures...
Commercial unit cooler - 10 - 91.1 kW
These types of radial unit coolers are ideal for applications in the refrigeration field where ventilation is required with a 150-Pa external static pressure. With this setup, air distribution is allowed through socks of varying...
Commercial unit cooler - 10 - 91.1 kW
These types of radial unit coolers are ideal for applications in the refrigeration field where ventilation is required with a 150-Pa external static pressure. With this setup, air distribution is allowed through socks of varying...
Dual-flow unit cooler - 5.8 - 139.9 kW
The Industrial Unit Coolers by ThermoKey implements a new geometry design, for refrigeration. It has a high efficiency corrugated surface "TK" aluminium fins and 1/2" diameter copper tubes internally grooved...
Dual-flow unit cooler - 5.8 - 139.9 kW
The Industrial Unit Coolers by ThermoKey implements a new geometry design, for refrigeration. It has a high efficiency corrugated surface "TK" aluminium fins and 1/2" diameter copper tubes internally grooved...
Dual-flow unit cooler - 4.3 - 159.8 kW
This innovative cubic and dual flow industrial unit cooler series of products is designed for any application type. This new product series is suitable for brine, with the possibility...
Dual-flow unit cooler - 4.3 - 159.8 kW
This innovative cubic and dual flow industrial unit cooler series of products is designed for any application type. This new product series is suitable for brine, with the possibility of choosing between 6 and 10 rows for each of the unit, providing the right capacity and exchange surface. The heat exchanger oil coils is produced using a geometry designed specifically for refrigeration.
The high efficiency corrugated surface "TK" aluminum fins and the tube diameter of 5/8" are also worth mentioning. Note that the coil is tested to a pressure of 17 bar, while all of the components are checked in accordance to the stringent production specifications and the quality control requirements.
The high efficiency corrugated surface "TK" aluminum fins and the tube diameter of 5/8" are also worth mentioning. Note that the coil is tested to a pressure of 17 bar, while all of the components are checked in accordance to the stringent production specifications and the quality control requirements.
Commercial unit cooler / dual-flow - Ø 350mm, 2.0-19.8 kW | FHD
The FHD Seris of Commercial Unit Cooler, manufactured by LU-VE S.p.A., is specifically...
Commercial unit cooler / dual-flow - Ø 350mm, 2.0-19.8 kW | FHD
The FHD Seris of Commercial Unit Cooler, manufactured by LU-VE S.p.A., is specifically designed highest energy efficiency with EC fans as standard equipment. It is built with fin spacing of 3.0 mm to 4.5 mm to 7.0 mm.
Moreover, this product is configured with a diameter of 350 mm, and has 2.0 to 19.8 kW.
Moreover, this product is configured with a diameter of 350 mm, and has 2.0 to 19.8 kW.
Commercial unit cooler - 1.5 - 81.9 kW | FHC, FBC
This new range of products is known as FHC and represents an evolution and, at the same time, an enlargement of the SHC family which preceded this series. In addition to this, the brand new ventilation...
Commercial unit cooler - 1.5 - 81.9 kW | FHC, FBC
This new range of products is known as FHC and represents an evolution and, at the same time, an enlargement of the SHC family which preceded this series. In addition to this, the brand new ventilation system and the low energy consumption are two of the most important advantages, while the new combinations of highly efficient coils and a new fin spacing is another major advantage. Next, another important aspect you should take into account is the JETSTREAMER grill, which ensures uniform air flow distribution across the heat exchanger.
Other important advantages are greater air quantity, extended use of the fan during the stage of defrost, as well as a long air throw and an extremely wide capacity range. The highly attractive modern casing design is also worth taking into account.
Other important advantages are greater air quantity, extended use of the fan during the stage of defrost, as well as a long air throw and an extremely wide capacity range. The highly attractive modern casing design is also worth taking into account.
Dual-flow unit cooler - ø 330mm, 2.0-22.0 kW | BMD-SMD-BHD-SHD
The dual discharge commercial unit coolers is manufactured by LU-VE Group,...
Dual-flow unit cooler - ø 330mm, 2.0-22.0 kW | BMD-SMD-BHD-SHD
The dual discharge commercial unit coolers is manufactured by LU-VE Group, and is has a fin spacing of 0.3 mm up to 7.0 mm that has 1 to 5 fans, which has a diameter of 330 mm. It is available in either 4 or 6 pole that is utilized for operations with low noise and low ventilation.
Commercial unit cooler / angled - Ø 300mm, 1.9-12.3 kW | BMA-SMA
Angled commercial unit coolers BMA-SMA are ideal for small cold rooms. Equipped with newest energy saving motors that are extremely quiet having 300mm diameter external rotor. The Venturi and Jet-O-Matic distributors and refrigerant circuits have been specially designed to ensure...
Commercial unit cooler / angled - Ø 300mm, 1.9-12.3 kW | BMA-SMA
Angled commercial unit coolers BMA-SMA are ideal for small cold rooms. Equipped with newest energy saving motors that are extremely quiet having 300mm diameter external rotor. The Venturi and Jet-O-Matic distributors and refrigerant circuits have been specially designed to ensure...
Commercial unit cooler / angled - ø 275mm, 1.1 - 8.25 kW | BHA - SHA
The BHA - SHA model, manufactured by LU-VE S.p.A., is a commercial unit cooler. This...
Commercial unit cooler / angled - ø 275mm, 1.1 - 8.25 kW | BHA - SHA
The BHA - SHA model, manufactured by LU-VE S.p.A., is a commercial unit cooler. This unit cooler features a fin spacing of the these variations namely 3mm, 4.5mm and 7.5mm. In addition, it can also accommodate 1 to 4 fans.
This product is available in BENEFIT version from JET-O-MATIC, a LU-VE patented distributor.
This product is available in BENEFIT version from JET-O-MATIC, a LU-VE patented distributor.