Vertical pumps

select brand


FLUX

Centrifugal pump / vertical / chemical process - max. 74 m³/h | F 706 PP series

This product is suitable for transferring corrosive liquids in the chemical industry, along with chemical engineering with any application that requires economical and safe transfer, as well as...

Centrifugal pump / vertical / chemical process - max. 74 m³/h | F 706 PP series

This product is suitable for transferring corrosive liquids in the chemical industry, along with chemical engineering with any application that requires economical and safe transfer, as well as circulation of alkalis and acids and other chemical fluids, without or with solids in suspension.

The slide bearing lubricated by the liquid provides immersion lengths of up to 2,000mm, while the very smooth running is ensured by the large PP-coated drive shaft, as well as the thick-walled support tube. The very long service life and extended maintenance intervals are other important advantages, while the item is available in four different sizes, 135, 185, 230 and 350, so users can select something that meets the requirements of an application precisely.

Centrifugal pump / vertical / compact - max. 45 m³/h | F 716 PP/PVDF series

The F716 PP and PVDF is a compact vertical centrifugal immersion pump equipped with a three-phase motor. Used in the transfer of neutral or corrosive fluids in the...

Centrifugal pump / vertical / compact - max. 45 m³/h | F 716 PP/PVDF series

The F716 PP and PVDF is a compact vertical centrifugal immersion pump equipped with a three-phase motor. Used in the transfer of neutral or corrosive fluids in the chemical industry, and in fields of chemical engineering, electroplating and in steel or stainless steel picking plants. It's motor is equipped with an extended free-flying shaft that permits the pump to utilize the motor shaft. Support bars are firmly attached to the mounting flange allowing for uninterrupted operation and its seals or bearings do not come in contact with the fluids.

Available in sizes 115, 135, 185 and 230 in order to meet various capacity demands.
GRUNDFOS

Centrifugal pumping unit / booster / with electric motor / for water - CRFlex

The Grundfos solar surface pump is capable of providing sustainability, reliability and efficiency in solving water problems such as failure of supply systems. This pump...

Centrifugal pumping unit / booster / with electric motor / for water - CRFlex

The Grundfos solar surface pump is capable of providing sustainability, reliability and efficiency in solving water problems such as failure of supply systems. This pump can deliver alternative supply of water in hard to reach areas.
It integrates an innovative MGFlex motor for optimum operation utilizing solar power for surface pump applications. These solar surface pumps can also operate using a grid or a generator. It has standard variable-speed operation and motor protection that provides maintenance-free and efficient pumping. Furthermore, the installation of this pump is expensive but it guarantees return of operating cost is reduced.

Submersible pump / drain / draining / for aggressive media - Unilift CC series

Constructed with stainless steel and molded composite materials, the Unilift CC is developed for pumping gray waste water and drain water. This single stage, submersible pump may be...

Submersible pump / drain / draining / for aggressive media - Unilift CC series

Constructed with stainless steel and molded composite materials, the Unilift CC is developed for pumping gray waste water and drain water. This single stage, submersible pump may be used as either a temporary or permanently installed unit, and can pump water up to 3 mm above the floor.

With a non-return flap valve, the pump keeps backflow from occurring near the outlet. Also, operators may utilize and adapt to effectively connect to either 3/4 in, 1 in, of 1 1/4 in outlets.

For those who prefer a drainage pump model that incorporates other components such as a Storz coupling and hose, a box with perforated mesh slides, customers may opt for the Multibox B-CC7 range of pumps as an alternative.

Submersible pump / dewatering / drainage / with electric motor - 70 l/s | DW series

These are portable and robust pumps from Grundfos that have a vertical - discharge port. They can be used with motors with power ranges between 0.8 - 20 kW. They are used for carrying out dewatering...

Submersible pump / dewatering / drainage / with electric motor - 70 l/s | DW series

These are portable and robust pumps from Grundfos that have a vertical - discharge port. They can be used with motors with power ranges between 0.8 - 20 kW. They are used for carrying out dewatering at excavation sites, building drainage, construction sites and also in those applications that require raw water to be pumped off with higher pressure. The main parts of the pump are made out of aluminum that makes it light. The capabilities at high pressure and the compact design makes this pump easy to handle and portable. The impeller is of semi - open type and made out of stainless steel for increasing wear resistance. This pump can deliver consistent performance, service and user friendliness and also reliability due to the various features associated with it.
KSB S.A.S. - France

Submersible pump / centrifugal / vertical - max. 135 m, max. 980 m³/h | CTN/-H

The CTN/-H is a vertical shaft radially split submersible pump and it comes with a double volute which is...

Submersible pump / centrifugal / vertical - max. 135 m, max. 980 m³/h | CTN/-H

The CTN/-H is a vertical shaft radially split submersible pump and it comes with a double volute which is used for dry and wet installation. It is a single entry pump and it can have one or two stages. It is designed with radial impeller and heatable model is available as well.
It is ideal for pumping chemically aggressive fluids with low contamination with the solids, and in petrochemical and chemical processes.

Centrifugal pump / single-stage / vertical - max. 100 m, max. 750 m³/h | Etanorm GPV / CPV

The Etanorm GPV and CPV models of volute casing pumps are constructed in compliance with EN 733...

Centrifugal pump / single-stage / vertical - max. 100 m, max. 750 m³/h | Etanorm GPV / CPV

The Etanorm GPV and CPV models of volute casing pumps are constructed in compliance with EN 733 industry standards, and can be submerged up to 2,000 mm. These single stage pumps are designed for vertical mounting in closed tank compartments under atmospheric pressure. Examples of applications for the model include operations with dipping paints, and neutral phosphatizing solutions.

Centrifugal pump / vertical / chemical process - max. 100 m, max. 1 600 m³/h | INVCP / INVCN

INVCP/INVCN line shaft vertical centrifugal pumps come with the base plate for tanks and pits. They are available with semi open...

Centrifugal pump / vertical / chemical process - max. 100 m, max. 1 600 m³/h | INVCP / INVCN

INVCP/INVCN line shaft vertical centrifugal pumps come with the base plate for tanks and pits. They are available with semi open or closed impellers. The INVCP is supplied with a discharge pipe that goes up to the outside of the base plate. The INVCN model comes without the discharge pipe.
These pumps are ideal for corrosive chemical fluids which can be contaminated with solids or have low levels of solids in them. The most common usage of these pumps is in petrochemical and chemical industry.

Centrifugal pump / vertical / self-priming - max. 50 m, max. 2.2 m³/h | Lubricoupe S

The Lubricoupe S from KSB is a centrifugal pump that features a star impeller. This self-priming...

Centrifugal pump / vertical / self-priming - max. 50 m, max. 2.2 m³/h | Lubricoupe S

The Lubricoupe S from KSB is a centrifugal pump that features a star impeller. This self-priming pump functions at a single stage.

Installed vertically, it can be used for a wide variety of applications including oil pumping, lubricant cooling, and agent degreasing. They are also ideal for wash water in different machines and systems.
{{item.name}}