+7 (812) 645-08-06
Centrifugal pumps
select brand
Centrifugal pump / for heating / recirculation / circulation - 3.07 m³/h, 10 bar | ALPHA2 series
The ALPHA2 is a small circulator pump, designed for circulating water and other liquid through a heating system.With The AUTO ADAPT feature, just install the pump and leave it adjusted to the factory setting. The pump analyses the heating system, and determines the best settings for optimum...
Centrifugal pump / for heating / recirculation / circulation - 3.07 m³/h, 10 bar | ALPHA2 series
The ALPHA2 is a small circulator pump, designed for circulating water and other liquid through a heating system.With The AUTO ADAPT feature, just install the pump and leave it adjusted to the factory setting. The pump analyses the heating system, and determines the best settings for optimum performance. The settings change with the demands. The Grundfos ALPHA2 does all of the work and the worrying itself.
The ALPHA2 can also be used for the hot water in your house, for systems which have constant or varying flows where the pump duty point needs to be optimised, where there are varying flow-pipe temperatures, or where night setback is mandatory.
The ALPHA2 also has some nice features and benefits which include its compact body with the control box integrated within the pump head. It has integrated differential pressure control, high starting torque, low noise, automatic night setback, and an integrated frequency converter. The pump housing is self-venting, and has a display showing watts of power consumed.Because of its efficiency, it also reduces CO2 emissions.It is very reliable claims environmental responsibility.
The ALPHA2 can also be used for the hot water in your house, for systems which have constant or varying flows where the pump duty point needs to be optimised, where there are varying flow-pipe temperatures, or where night setback is mandatory.
The ALPHA2 also has some nice features and benefits which include its compact body with the control box integrated within the pump head. It has integrated differential pressure control, high starting torque, low noise, automatic night setback, and an integrated frequency converter. The pump housing is self-venting, and has a display showing watts of power consumed.Because of its efficiency, it also reduces CO2 emissions.It is very reliable claims environmental responsibility.
Centrifugal pump / booster / with electric motor / beverage - max. 25 m³/h | CM/CME series
The Grundfos CM and CME pumps are horizontal multistage pumps that possess flow rates up to 36m3/hr and eventually peaks to 140m in established and varying speeds. Numerous features come...
Centrifugal pump / booster / with electric motor / beverage - max. 25 m³/h | CM/CME series
The Grundfos CM and CME pumps are horizontal multistage pumps that possess flow rates up to 36m3/hr and eventually peaks to 140m in established and varying speeds. Numerous features come with the CM and CME pumps. They have optimized hydraulic and motor performance which results to minimal energy usage. The new pump and motor design are fully reliable while its compact size saves ample space. Various customized options are available such as alternative seals and voltage ranges. These pump generate minimal noise during operation. It can be utilized in operation involving drinking water since it follows drinking water standards and the Water Regulations Advisory Scheme (WRAS) as well as the Attestation De Conformite Sanitaire (ACS).
Centrifugal pump / process / for cleaning / multiple-purpose - CR series
The basic CR pump range can be used in any industrial processes. Available in materials like cast iron, two grades of stainless steel and all-titanium, it has eleven...
Centrifugal pump / process / for cleaning / multiple-purpose - CR series
The basic CR pump range can be used in any industrial processes. Available in materials like cast iron, two grades of stainless steel and all-titanium, it has eleven flow sizes with the capability of generating almost 50 bar of pressure. It also features various shaft seals, rubber materials and supply voltages
The pump parts are commonly vulnerable to difficult liquids or demanding operating environments but can be developed to adapt to certain demands. These pumpa are typically used for in-process water systems, washing and cleaning systems, seawater systems, the pumping of acids and alkalis and ultra filtration systems among others.
The pump parts are commonly vulnerable to difficult liquids or demanding operating environments but can be developed to adapt to certain demands. These pumpa are typically used for in-process water systems, washing and cleaning systems, seawater systems, the pumping of acids and alkalis and ultra filtration systems among others.
Centrifugal pump / transfer / booster / multiple-purpose - max. 1 500 m³/h | NB/NBG/NBGE series
Grundfos' NB/NBG/NGBE series of end-suction pumps are multi-functional pumps designed for water supply, irrigation, industrial pressure boosting etc....
Centrifugal pump / transfer / booster / multiple-purpose - max. 1 500 m³/h | NB/NBG/NBGE series
Grundfos' NB/NBG/NGBE series of end-suction pumps are multi-functional pumps designed for water supply, irrigation, industrial pressure boosting etc....
Centrifugal pump / process / multiple-purpose / transfer - max. 550 m³/h | NK/NKG/NKGE series
Grundfos NK/NKG pumps are developed use in a wide variety of applications including industrial liquid transfer, heating, ventilation and air conditioning (HVAC), irrigation, process and water supply industries....
Centrifugal pump / process / multiple-purpose / transfer - max. 550 m³/h | NK/NKG/NKGE series
Grundfos NK/NKG pumps are developed use in a wide variety of applications including industrial liquid transfer, heating, ventilation and air conditioning (HVAC), irrigation, process and water supply industries. The end suction pumps are ideal for use in specific industries; water supply, industrial, pressure boosting, industrial liquid transfer, and HVAC. All units are single stage centrifugal volute pumps that offer an axial suction port, radial discharge port, and a horizontal shaft. They are not self priming units, and offer the back pull out feature, which permits easy removal of the motor, coupling, bearing bracket and impeller with requiring removal of the pump housing or pipes. This feature permits easy maintenance by one person with a crane. These long coupled pumps are fully in compliance with either EN733 or ISO2858.
Centrifugal pump / vertical / stainless steel - max. 23 m³/h | F 620 S series
The F620S Series is equipped with O-rings in FKM and a mechanical seal made from ceramic oxide that separates the...
Centrifugal pump / vertical / stainless steel - max. 23 m³/h | F 620 S series
The F620S Series is equipped with O-rings in FKM and a mechanical seal made from ceramic oxide that separates the bearing liquid from the upper shaft. Designed with an open conical impeller, this unit is comprised of an inner and outer tube, with a drive shaft supported by its inner tube. It is ideal for transferring liquids that have low flammability from container to container.
These units come in two different sizes, either 15 or 30.
These units come in two different sizes, either 15 or 30.
Centrifugal pump / stainless steel - max. 23 m³/h | F 620 S TR series
The Vertical Centrifugal Immersion Pump Type F 620 S is equipped with an open cylindrical impeller....
Centrifugal pump / stainless steel - max. 23 m³/h | F 620 S TR series
The Vertical Centrifugal Immersion Pump Type F 620 S is equipped with an open cylindrical impeller. It is used for moving reduced combustible liquids from containers, either close or open topped. The device has a base plate to enable horizontal assembly and has a thread attachment on suction and discharge side. It also has an available interior and outer tube.
Centrifugal pump / vertical / plastic - max. 34 m³/h | F 640 PP series
The F 640 PP is a vertical centrifugal immersion pump equipped with a mechanical seal fabricated from ceramic oxide. This seal isolates the liquid...
Centrifugal pump / vertical / plastic - max. 34 m³/h | F 640 PP series
The F 640 PP is a vertical centrifugal immersion pump equipped with a mechanical seal fabricated from ceramic oxide. This seal isolates the liquid from bearings and upper shaft. This pump is used in transporting massive volumes of low flammable liquids from container such as open or closed topped tanks and reservoirs. The equipment comprises of an inner and outer tube; the drive shaft is reinforced within the inner tube. The inner tube that possesses a core made out of steel allows for durability and prevents the expansion of the plastic during hot temperatures.
Centrifugal pump / vertical / chemical process - max. 42 m³/h | F 640 PP/PVDF series
From the PVDF series, the F 640 PP vertical centrifugal immersion pump is designed for conveying corrosive chemicals....
Centrifugal pump / vertical / chemical process - max. 42 m³/h | F 640 PP/PVDF series
From the PVDF series, the F 640 PP vertical centrifugal immersion pump is designed for conveying corrosive chemicals. This makes it ideal for use in chemical engineering and other industries that handle chemicals. With two models sizes - 185 and 230 - the pump is suited for various volume specifications.
Each model is constructed with a ceramic oxide/SiC mechanical seal and FKM O-ring to separate the upper shaft and bearing from the liquid.
Each model is constructed with a ceramic oxide/SiC mechanical seal and FKM O-ring to separate the upper shaft and bearing from the liquid.
Centrifugal pump / with mechanical seals - max. 44 m³/h | F 640 TR series
Integrated with an inner and outer tube, and a ceramic oxide/SiC mechanical seal, the Flux Type F 640 OO-30 TR and F 640 PP-230...
Centrifugal pump / with mechanical seals - max. 44 m³/h | F 640 TR series
Integrated with an inner and outer tube, and a ceramic oxide/SiC mechanical seal, the Flux Type F 640 OO-30 TR and F 640 PP-230 TR Centrifugal Immersion Pumps are capable of transporting more extensive volumes of minimal flammability liquids. The F 640 PP-230 TR features a closed centrifugal impeller, while the F 640 OO-30 TR showcases an open conical impeller. A flange or thread connection is also determined by the model chosen. However, both models exhibit base plates that allow horizontal installation.
Centrifugal pump / for the boiler power supply - PM
The pump module is utilized in the transporting of feed water from the feed water tank into the shell boiler. It is also used...
Centrifugal pump / for the boiler power supply - PM
The pump module is utilized in the transporting of feed water from the feed water tank into the shell boiler. It is also used in the feeding of condensate from the condensate tank into the daeration system. A motor with frequency converter is optionally integrated within the pump module. This permits the user to have infinite control over the water quantity that he/she requires.
Fast installation of this equipment is due to its pre-structuring. It uses less power and is easy to operate.
Fast installation of this equipment is due to its pre-structuring. It uses less power and is easy to operate.