Filter cartridges for liquids

select brand


Horizon Environmental Technology Ltd

Pleated filter cartridge / high-flow / for liquids - 40/60 inch

Removal rating : 3 µm - 100 µm

Rizonflow+ RFHP High Flow Filter Cartridge is a 6-inch diameter,coreless, pleated cartridge. Its optimized design enables extended filtration area, which results in significant filter reduction, and smaller housings for high flow-rate condensate...

Pleated filter cartridge / high-flow / for liquids - 40/60 inch

Rizonflow+ RFHP High Flow Filter Cartridge is a 6-inch diameter,coreless, pleated cartridge. Its optimized design enables extended filtration area, which results in significant filter reduction, and smaller housings for high flow-rate condensate system applications.

Features & Benefits
-6" diameter, large geometry for high flow capacity
-Absolute-rated filter medium for reproducible performance
-Inside -out flow pattern design allows for excellent dirt holding capacity
-Highflow capacity reduce upfront capital cost
-FDA listed materials of construction
-Handle design result in much faster, easier filter changeout
-Available in a variety of filter lengths and grades

Application
-Power Condensate System
-Municipal Water
-Chemical
-Petrochemicals
-Electronics (RO Prefiltration, Process Water)
-Food& Beverage (process Water)
-Pharmeceutical (process water)
-Waste Water
VUOTOTECNICA

Pleated filter cartridge / paper - max. ø 31 mm, 7 µm | 00FCL03

Removal rating : 7 µm

The 00FCL03 from Vuototecnica is a paper filtering cartridge that is made specially for...

Pleated filter cartridge / paper - max. ø 31 mm, 7 µm | 00FCL03

The 00FCL03 from Vuototecnica is a paper filtering cartridge that is made specially for FCL filters. This model is manufactured with pleated paper that is specially treated with a 7 μ filtering degree to maximize its surface. This paper covers two flanges that are made of plastic.

This unit is ideal for filtering impurities and dust.

Pleated filter cartridge / paper - max. ø 227 mm, max. 7 µm | 00FC series

Removal rating : max 7.0 µm

The 00FC series offers a wide array of cartridges that are designed for FC suction filters. They are suggested...

Pleated filter cartridge / paper - max. ø 227 mm, max. 7 µm | 00FC series

The 00FC series offers a wide array of cartridges that are designed for FC suction filters. They are suggested for holding fine and vague dust, yet not in vicinity of water and oil vapors and condensation. These cartridges are made with an extraordinary treated paper and with a sifting degree equivalent to 5 to 7 μ, which is creased to build its surface and held into a twofold punctured sheet steel nook.

Oil filter cartridge / for filter - max. ø 190 mm | 00FO series

The VuotoTecnica® Steel Wool Filtering Cartridges for FO-filters is a high-performance...

Oil filter cartridge / for filter - max. ø 190 mm | 00FO series

The VuotoTecnica® Steel Wool Filtering Cartridges for FO-filters is a high-performance...

Pleated filter cartridge / paper - max. ø 70 mm, 50 µm | Sx/4 series

Removal rating : 50 µm

The filtering cartridges described in this page, once installed on their container, are able to retain the impurities and dust
contained in the sucked fluid, interfering with...

Pleated filter cartridge / paper - max. ø 70 mm, 50 µm | Sx/4 series

The filtering cartridges described in this page, once installed on their container, are able to retain the impurities and dust
contained in the sucked fluid, interfering with the vacuum pump or generator capacity in a negligible manner.
They are produced with different materials that can be identified with the following abbreviations:
- Series SP. Pleated paper filtering cartridge with compression sealing.
- Series SS. Pleated polypropylene mesh filtering cartridge with compression sealing.
- Series SA. AISI 304 stainless steel mesh filtering cartridge with compression sealing.
The number after the article indicates the length in inches of the filtering cartridge.

Liquid filter cartridge - max. ø 57 mm, 50 µm | RP, RS, RA series

Removal rating : 50 µm

Vuototecnica filtering cartridges displayed on this page provide excellent retention of impurities and dust content in the sucked fluid. At the same time, they cause minimal interference...

Liquid filter cartridge - max. ø 57 mm, 50 µm | RP, RS, RA series

Vuototecnica filtering cartridges displayed on this page provide excellent retention of impurities and dust content in the sucked fluid. At the same time, they cause minimal interference with the vacuum pump or generator capacity.

They are available in various materials. The following abbreviations are used for their identification. Series RP quick coupling filtering cartridge is made with pleated paper and has a double O-ring. Series RS quick coupling filtering cartridge features a pleated polypropylene mesh and a double O-ring. Series RA quick coupling filtering cartridge is made of AISI 304 stainless steel with a double O-ring. The filtering cartridge's length in inches is indicated by the number after the article.
{{item.name}}