+7 (812) 645-08-06
Ventilation grills, diffusers
select brand
Ceiling air diffuser - TSK series
The Systemair TSK circular supply diffuser is a perforated variant of the TST and has an adjustable...
Ceiling air diffuser - TSK series
The Systemair TSK circular supply diffuser is a perforated variant of the TST and has an adjustable gap width. It is specifically designed for ceiling d=fitting and this dual part product can be adjusted to offer the needed throw. Adding to this, it is crafted from galvanized sheet metal with a white power coated finish and can be had with (RAL 9010-80) diameter configurations.
Ceiling air diffuser - Konika-A series
In the ceiling assembly, the Konika-A is used as a multi-cone diffuser that can be altered as a horizontally or vertically dischargeable. They are made of an adjustable cone on the outside and a double centre cone. The double cone can be changed for altering...
Ceiling air diffuser - Konika-A series
In the ceiling assembly, the Konika-A is used as a multi-cone diffuser that can be altered as a horizontally or vertically dischargeable. They are made of an adjustable cone on the outside and a double centre cone. The double cone can be changed for altering patterns of distribution from horizontal to vertical. The diffusers are made of high quality materials like steel that are given an external coating of white powder for finishing - RAL 9010 and are available in 6 different sizes to suit your needs from 160-500. The products are also manufactured using aluminium if the requirement needs it. Cleaning can be done on the diffusers when the inner double cone is removed from the assembly. The dismantling of the inner double cone is done by pressing it and turning it, to perform the mounting of the cone diffuser. The external cone is attached using strong joining techniques like pop rivetting and the inner cone is then remounted to the position in the desired pattern of distribution - either horizontal or vertical.
Ceiling air diffuser - TSP series
The TSP diffuser on ceilings can be installed visibly with plenum boxes.
Ceiling air diffuser - TST series
Systemair TST - Circular supply diffuser.
The distribution model can be changed and the gap width is modifiable.
Purpose of the Systemair TST - Circular supply diffuser:
The TST...
The distribution model can be changed and the gap width is modifiable.
Purpose of the Systemair TST - Circular supply diffuser:
The TST...
Ceiling air diffuser - TST series
Systemair TST - Circular supply diffuser.
The distribution model can be changed and the gap width is modifiable.
Purpose of the Systemair TST - Circular supply diffuser:
The TST...
The distribution model can be changed and the gap width is modifiable.
Purpose of the Systemair TST - Circular supply diffuser:
The TST...
Ceiling air diffuser - TSR series
The Systemair TSR ceiling diffuser is supplied with a plenum box to enable visible installation. A removable damper, fiber-free sound installation and test points are fitted to the...
Ceiling air diffuser - TSR series
The Systemair TSR ceiling diffuser is supplied with a plenum box to enable visible installation. A removable damper, fiber-free sound installation and test points are fitted to the plenum box.
The TSR is a complete circular supply diffuser which combines a plenum box with a sound-insulated and adjustable diffuser unit. Test points and a damper are included in the plenum box. Fiber-free sound-insulation material is used to internally line the plenum box. The TSR is ideal for cooled air to a maximum of dT of 12 K.
The TSR has been constructed from galvanized sheet metal which has a white powder-coated finish (RAL 9010-80). It has various available diameters of 100, 125, 160, 200 and 250 mm.
The TSR is a complete circular supply diffuser which combines a plenum box with a sound-insulated and adjustable diffuser unit. Test points and a damper are included in the plenum box. Fiber-free sound-insulation material is used to internally line the plenum box. The TSR is ideal for cooled air to a maximum of dT of 12 K.
The TSR has been constructed from galvanized sheet metal which has a white powder-coated finish (RAL 9010-80). It has various available diameters of 100, 125, 160, 200 and 250 mm.
Ceiling air diffuser - DQ - ADQ series
TROX ceiling diffusers types DQ · ADQ in square and rectangular design, produced in aluminium (ADQ) or steel (DQ), consist of the face frame and the fixed...
Ceiling air diffuser - DQ - ADQ series
TROX ceiling diffusers types DQ · ADQ in square and rectangular design, produced in aluminium (ADQ) or steel (DQ), consist of the face frame and the fixed...
Floor-mounted air diffuser - FBA - FBK series
These floor diffusers have been designed to withstand very heavy...
Floor-mounted air diffuser - FBA - FBK series
These floor diffusers have been designed to withstand very heavy usage.
Can be used with and without a border unit.
Control of discharge characteristics and unit flow rate are available as accessories which fit into the dirt trap.
Can be used with and without a border unit.
Control of discharge characteristics and unit flow rate are available as accessories which fit into the dirt trap.
Stainless steel ventilation grill - AGW series
This device has been designed by TROX Technik with a perimeter angle border and opposed blade action. The blades are able to be adjusted from the front.
Metallic ventilation grill - ARR series
These roll down grilles come with a construction that makes them suitable for various industry...
Metallic ventilation grill - ARR series
These roll down grilles come with a construction that makes them suitable for various industry applications and helps them provide superior performance every time they are used. The ARR flexible aluminum design also makes them usable as covers for floor induction diffusers, ventilation ducts, underfloor convection heaters, decentralized ventilation units and others.
Slot air diffuser - 40 – 500 m³/h | VSD35 series
TROX slot diffusers type VSD35 are suitable for continuous assembly and can be installed parallel to linear light arrays unobtrusively. It is available in 1 or 4 slot configuration. One-piece extruded element...
Slot air diffuser - 40 – 500 m³/h | VSD35 series
TROX slot diffusers type VSD35 are suitable for continuous assembly and can be installed parallel to linear light arrays unobtrusively. It is available in 1 or 4 slot configuration. One-piece extruded element...
Air regulation damper - 200 x 200 - 2 000 x 2 000 mm | RKM
Mandik RKM Square regulation adjustment damper
The Mandik RKM Square regulation adjustment damper has the following features:
• For...
The Mandik RKM Square regulation adjustment damper has the following features:
• For...
Air regulation damper - 200 x 200 - 2 000 x 2 000 mm | RKM
Mandik RKM Square regulation adjustment damper
The Mandik RKM Square regulation adjustment damper has the following features:
• For...
The Mandik RKM Square regulation adjustment damper has the following features:
• For...
Air regulation damper - 200 x 200 - 2 000 x 1 600 mm | RKTM
For regulation and airflow cut off inside the duct
Manual or electrical actuating
Can...
Manual or electrical actuating
Can...
Air regulation damper - 200 x 200 - 2 000 x 1 600 mm | RKTM
For regulation and airflow cut off inside the duct
Manual or electrical actuating
Can...
Manual or electrical actuating
Can...
Ceiling air diffuser - 55 - 1 200 m³/h | VVM
Installation into ceiling or suspended below ceiling
For offices, cinemas, shopping centers, etc.
Airflow...
For offices, cinemas, shopping centers, etc.
Airflow...
Ceiling air diffuser - 55 - 1 200 m³/h | VVM
Installation into ceiling or suspended below ceiling
For offices, cinemas, shopping centers, etc.
Airflow volume from 55 to 1 200 m3/h
Size AxB in mm: 300, 400, 500, 600, 625, 825
Installation height from 2,6 to 4,0 m
For heating and cooling with ∆tp ≤ −14 K
Adjustable plastic blades for directing of airflow
Galvanized plenum box
Front panel coated by RAL 9010
For offices, cinemas, shopping centers, etc.
Airflow volume from 55 to 1 200 m3/h
Size AxB in mm: 300, 400, 500, 600, 625, 825
Installation height from 2,6 to 4,0 m
For heating and cooling with ∆tp ≤ −14 K
Adjustable plastic blades for directing of airflow
Galvanized plenum box
Front panel coated by RAL 9010
Ceiling air diffuser - 120- 600 m³/h |VVPM
Installation into ceiling or suspended below ceiling
For offices, cinemas, shopping centers,...
For offices, cinemas, shopping centers,...
Ceiling air diffuser - 120- 600 m³/h |VVPM
Installation into ceiling or suspended below ceiling
For offices, cinemas, shopping centers, etc.
Airflow volume from 120 to 600 m3/h
Size AxB in mm: 300, 400, 500, 600, 625
Installation height from 2,6 to 4,0 m
For heating and cooling with ∆tp ≤ −14 K
Galvanized plenum box
Front panel coated by RAL 9010
For offices, cinemas, shopping centers, etc.
Airflow volume from 120 to 600 m3/h
Size AxB in mm: 300, 400, 500, 600, 625
Installation height from 2,6 to 4,0 m
For heating and cooling with ∆tp ≤ −14 K
Galvanized plenum box
Front panel coated by RAL 9010
Ceiling air diffuser - 110 - 1 800 m³/h | ALCM
The ALCM anemostat diffusers can be installed into the ceiling or suspended below it. They are ideal for usage in shopping centers, cinemas, restaurants and offices....
Ceiling air diffuser - 110 - 1 800 m³/h | ALCM
The ALCM anemostat diffusers can be installed into the ceiling or suspended below it. They are ideal for usage in shopping centers, cinemas, restaurants and offices.
They provide the air flow that ranges from 110 to 1800 cubic meters per hour and they come in 250 mm, 300 mm, 400 mm, 500 mm, 600 mm or 625 mm size (A x B). The installation height for these anemostat diffusers is 2.6 m to 4 m. They can be used for heating and cooling with ∆tp ≤ −8 K. The supplied air is separated into o four sides.
The device is in a shape of a galvanized plenum box and the front panel is coated with RAL 9010 paint.
They provide the air flow that ranges from 110 to 1800 cubic meters per hour and they come in 250 mm, 300 mm, 400 mm, 500 mm, 600 mm or 625 mm size (A x B). The installation height for these anemostat diffusers is 2.6 m to 4 m. They can be used for heating and cooling with ∆tp ≤ −8 K. The supplied air is separated into o four sides.
The device is in a shape of a galvanized plenum box and the front panel is coated with RAL 9010 paint.