+7 (812) 645-08-06

Axial fans

select brand

Axial fan / AC - 106 cfm | EMU series

The EMU Series AC axial flow fans offer lower power consumption by utilizing...

Axial fan / AC - 106 cfm | EMU series

The EMU Series AC axial flow fans offer lower power consumption by utilizing a brushless motor. A wide voltage range can be used, single-phase 100-240V (50 / 60Hz) for the corresponding and the same performance characteristics are obtained regardless of the frequency used.

Axial fan / AC / long-life - 258 - 564 cfm | MRE series

The MRE Series is available as a long life version of the MRS Series product....

Axial fan / AC / long-life - 258 - 564 cfm | MRE series

The MRE Series is available as a long life version of the MRS Series product. The MRE Series long-life fans have an expected life of 100,000 hours and are available with a low speed alarm.
Available in 6.30 in. (160 mm), 7.09 in. (180 mm) and 7.87 in. (200 mm) frame sizes.

Axial fan / DC - 17.7 - 212 cfm | MDA series

The MDP Series axial flow fans conform to the IP55 rating under the IEC Standards and can be used in locations that are splashed...

Axial fan / DC - 17.7 - 212 cfm | MDA series

The MDP Series axial flow fans conform to the IP55 rating under the IEC Standards and can be used in locations that are splashed with water. It comes with a stop sensor that outputs a signal when the fan stops.
IP55: Protection from jet water from all directions:
3.3 gal/min (12.5 L/min), 120 inH2O (30 kPa) jet water from all directions from a distance of 9.8 ft. (3 m) for 3 minutes
The MDP Series is available in frame sizes from 3.15 in. (80 mm) up to 4.69 in. (119 mm).

Axial fan / DC - 17.7 - 137 cfm | MDV series

The MDV Series DC Axial flow fans easily allow for changes in fan speed....

Axial fan / DC - 17.7 - 137 cfm | MDV series

The MDV Series DC Axial flow fans easily allow for changes in fan speed. They employ a PWM control method by which speed is changed with a PWM control circuit (not supplied).
The MDV Series is available in frame sizes from 2.36 in. (60 mm) up to 4.72 in. (120 mm).

Axial fan / AC - 0.45 - 24 m³/min, 34 - 360 Pa | MRS/MU series

ORIENTAL MOTOR, one of the pioneers in providing motor solutions introduce...

Axial fan / AC - 0.45 - 24 m³/min, 34 - 360 Pa | MRS/MU series

ORIENTAL MOTOR, one of the pioneers in providing motor solutions introduce their simple but heavy duty series of Axial flow fans , the MRS / MU Series. Provides optimum performance with its large air flow and high static pressure. Easy to install and maintain , cost effective and budget friendly.

Axial fan / DC - 0.18 - 6 m³/min, 70 - 137 Pa | MDE/MDS/MD series

MDE/MDS/MD showcases axial flow fans for DC rated voltage. It highlights long...

Axial fan / DC - 0.18 - 6 m³/min, 70 - 137 Pa | MDE/MDS/MD series

MDE/MDS/MD showcases axial flow fans for DC rated voltage. It highlights long life via its MDE models. It creates large air flow and is commendable in high static pressure.

MDE 1225-24L (119x119x25mm) is designed with an alarm function which handles a current of 0.3A and operation speed of 3000 min-1.

Axial fan / wide temperature range / refrigerator / heaters - max. 120 x 120 x 38 mm | T series

Air flow : 11 m³/h - 360 m³/h

They can be safely used in both low-temperature and high-temperature applications ranging from...

Axial fan / wide temperature range / refrigerator / heaters - max. 120 x 120 x 38 mm | T series

They can be safely used in both low-temperature and high-temperature applications ranging from refrigerators and freezers to heat-generating lighting devices. With these new products, the San Ace lineup can now serve in conventional applications such as communications devices, PV inverters, and rapid EV charging stations in even more demanding environments.

Axial fan / cooling / DC / server - max. ø 200 x 70 mm

Air flow : 2 m³/h - 1890 m³/h

The San Ace Cooling fan is very essential in controlling extreme temperature. This fan features...

Axial fan / cooling / DC / server - max. ø 200 x 70 mm

The San Ace Cooling fan is very essential in controlling extreme temperature. This fan features great air flow, efficiency, reliable and lesser noise qualities. It is best used for communication devices, servers and electronic equipment to dissipate excessive heat temperature. This simple device serves as great protection for your costly investments from burning.

Axial fan / high-flow / DC / rotary operated - max. ø 172 x 102 mm, max. 13 - 1 080 m³/h

Air flow : 13 m³/h - 1080 m³/h

From the leaders of high quality electrical equipment, SANYO DENKI comes this simple...

Axial fan / high-flow / DC / rotary operated - max. ø 172 x 102 mm, max. 13 - 1 080 m³/h

From the leaders of high quality electrical equipment, SANYO DENKI comes this simple innovation that can greatly help even the most sophisticated industry,the San Ace Counter Rotating Fan built primarily for high system impedance machines. Created to withstand even the most demanding of application even the harshest of working condition.

Axial fan / cooling / splash-resistant / for outdoor applications - max. ø 172 x 51 mm | W series

Air flow : 11 m³/h - 928 m³/h

These Splash proof fans are ideal and most recommended for cooling solar inverters and...

Axial fan / cooling / splash-resistant / for outdoor applications - max. ø 172 x 51 mm | W series

These Splash proof fans are ideal and most recommended for cooling solar inverters and equipment mostly for outdoor use. Assembled outdoors where it can operate under exposure to water. These devices are made with the most sophisticated materials to provide best results and therefore satisfying consumers’ economic and industrial applications

Axial fan / DC / oil-sealed - max. 120 x 120 x 38 mm | WF series

Air flow : 12 m³/h - 200 m³/h

From the leaders of high quality electrical equipment, SANYO DENKI comes this simple...

Axial fan / DC / oil-sealed - max. 120 x 120 x 38 mm | WF series

From the leaders of high quality electrical equipment, SANYO DENKI comes this simple innovation that can greatly help even the most sophisticated industry,the San Ace Oil Proof Fan built primarily for servo systems and industrial equipment.Created to withstand even the most demanding of application even the harshest of working condition.

Axial fan / DC / low-power-consumption - 38 mm, 0.07 - 0.45 m³/min | 9GA0312P3 series

DC Cooling Fans by San Ace frame are mainly made of plastic material, with a flammability...

Axial fan / DC / low-power-consumption - 38 mm, 0.07 - 0.45 m³/min | 9GA0312P3 series

DC Cooling Fans by San Ace frame are mainly made of plastic material, with a flammability level of UL94V-0 and has an estimated life service of 40,000/60 degree Celsius, 70,000h/40 degree Celsius. To continue, the current blocking function and reverse polarity serves as the machine's motor secure and protective system.

Axial fan / DC / low-power-consumption - 40 mm, 0.1 - 0.81 m³/min | 9GA04xx series

San Ace 40 has a plastic frame and impeller (plastic flammability: UL94V-0), with 40,000...

Axial fan / DC / low-power-consumption - 40 mm, 0.1 - 0.81 m³/min | 9GA04xx series

San Ace 40 has a plastic frame and impeller (plastic flammability: UL94V-0), with 40,000 hr life expectancy. Motor is protected by reverse polarity protection and current blocking function, with 50/60 Hz, 500VAC, 1 minute dielectric strength and 10MΩ or more at 500VDC megger insulation resistance (between lead conductor and frame).